Effect of Graphitic Nanofibers on Interfacial Adhesion and Fracture Toughness of Carbon Fibers-reinforced Epoxy Composites
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The mechanical properties of carbon fiber-reinforced epoxy composites (CFRPs) are greatly dependent on the interfacial adhesion between the carbon fibers and the epoxy matrix. Introducing nanomaterial reinforcements into the interface is an effective approach to enhance the interfacial adhesion of CFRPs. The main purpose of this work was to introduce graphitic nanofiber (GNFs) between an epoxy matrix and carbon fibers to enhance interfacial properties. The composites were reinforced with various concentrations of GNFs. For all of the fabricated composites, the optimum GNF content was found to be 0.6 wt%, which enhanced the interlaminar shear strength (ILSS) and fracture toughness (KIC) by 101.9% and 33.2%, respectively, compared with those of neat composites. In particular, we observed a direct linear relationship between ILSS and KIC through surface free energy. The related reinforcing mechanisms were also analyzed and the enhancements in mechanical properties are mainly attributed to the interfacial interlocking effect. Such an effort could accelerate the conversion of composites into high performance materials and provide fundamental understanding toward realizing the theoretical limits of interfacial adhesion and mechanical properties.
Abstract
The mechanical properties of carbon fiber-reinforced epoxy composites (CFRPs) are greatly dependent on the interfacial adhesion between the carbon fibers and the epoxy matrix. Introducing nanomaterial reinforcements into the interface is an effective approach to enhance the interfacial adhesion of CFRPs. The main purpose of this work was to introduce graphitic nanofiber (GNFs) between an epoxy matrix and carbon fibers to enhance interfacial properties. The composites were reinforced with various concentrations of GNFs. For all of the fabricated composites, the optimum GNF content was found to be 0.6 wt%, which enhanced the interlaminar shear strength (ILSS) and fracture toughness (KIC) by 101.9% and 33.2%, respectively, compared with those of neat composites. In particular, we observed a direct linear relationship between ILSS and KIC through surface free energy. The related reinforcing mechanisms were also analyzed and the enhancements in mechanical properties are mainly attributed to the interfacial interlocking effect. Such an effort could accelerate the conversion of composites into high performance materials and provide fundamental understanding toward realizing the theoretical limits of interfacial adhesion and mechanical properties.
참고문헌 (30)
- Robertson, I. D., "Rapid Energy-efficient Manufacturing of Polymers and Composites via Frontal Polymerization", Nature, 557, pp.223~227 (2018)
- Taynton, P., "Repairable Woven Carbon Fiber Composites with Full Recyclability Enabled by Malleable Polyimine Networks", Advanced Materials, 28, pp.2904~2909 (2016)
- Zhang, Y., "Recent Advanced Thermal Interfacial Materials : A Review of Conducting Mechanisms and Parameters of Carbon Materials", Carbon, 142, pp.445~460 (2019)
- Kwon, Y. J., "Graphene", carbon Nanotube Hybrid as a Multi-functional Interfacial Reinforcement for Carbon Fiber-reinforced Composites, 2017, pp.122, 23~30
- Karger-Kocsis, J., "All-carbon Multi-scale and Hierarchical Fibers and Related Structural Composites : A Review", Composites Science and Technology, 186, pp.107932~ (2020)
- 홍현기, "탄소섬유강화 복합소재의 열적, 전기적, 기계적 특성에 대한 질화붕소 첨가제의 효과", Composites Research, 33(3), pp.153~160 (2020), 한국복합재료학회[DOI]
- Zhang, T., "Improved Interfacial Property of Carbon Fiber Composites with Carbon Nanotube and Graphene Oxide as Multi-scale Synergetic Reinforcements", Composites Part A : Applied Science and Manufacturing, 125, pp.105573~ (2019)
- Jiang, Z., "Vibration Damping Mechanism of CuAlMn", polymer, Composites Part B : Engineering, pp.2020, 199[DOI]
- Zhou, Y., "High-performance Symmetric Supercapacitors Based on Carbon Nanotube", graphite Nanofiber Nanocomposites, 2018, pp.8, 1~7
- Jang, J. H., "Fabrication of Graphite Nanofibers Reinforced Metal Matrix Composites by Powder Metallurgy and Their Mechanical and Physical Characteristics", Journal of Composite Materials, 41, pp.1431~1443 (2007)
- Weinstein, R. D., "Oxidative Dehydrogenation of Ethanol to Acetaldehyde and Ethyl Acetate by Graphite Nanofibers", Carbon, 49, pp.701~707 (2011)
- Ferens, A. R., "Selective Decomposition of Isopropanol Using as Prepared and Oxidized Graphite Nanofibers", Carbon, 50, pp.192~200 (2012)
- 신평수, "도파민이 첨가된 에폭시 기지재의 기계적 물성 및 유리섬유 간 계면접착력 향상", Composites Research, 32(2), pp.96~101 (2019), 한국복합재료학회
- 강민송, "응력장을 이용한 직교적층 탄소섬유", 에폭시 복합재 적층판의 모드 I 균열 특성 연구, 2019, pp.32(6), 327~334[DOI]
- Owens, D. K., "Estimation of the Surface Free Energy of Polymers", Journal of Applied Polymer Science, 13, pp.1741~1747 (1969)
- Fowkes, F. M., "Determination of Interfacial Tensions, Contact Angles, and Dispersion Forces in Surfaces by Assuming Additivity of Intermolecular Interactions in Surfaces", The Journal of Physical Chemistry, 66, pp.382~382 (1962)
- Kaelble, D. H., "Dispersion-polar Surface Tension Properties of Organic Solids", The Journal of Adhesion, 2, pp.66~81 (1970)
- Ranganathan, N., "Structure Property Relation of Hybrid Biocomposites Based on Jute, Viscose and Polypropylene : The Effect of the Fibre Content and the Length on the Fracture Toughness and the Fatigue Properties", Composites Part A : Applied Science and Manufacturing, 83, pp.169~175 (2016)
- 이승옥, "Influence of chemical surface treatment of basalt fibers on interlaminar shear strength and fracture toughness of epoxy-based composites", Journal of Industrial and Engineering Chemistry, 32, pp.153~156 (2015), 한국공업화학회[DOI]
- Kim, S. H., "Effects of Ozonized Carbon Black on Fracture and Post-cracking Toughness of Carbon Fiber-reinforced Epoxy Composites", Composites Part B : Engineering, 177, pp.107379~ (2019)
- Kim, B. J., "A Study on Pore-opening Behaviors of Graphite Nanofibers by a Chemical Activation Process", Journal of Colloid and Interface Science, 306, pp.454~458 (2007)
- Rambabu, G., "Nanocomposite Membranes of Sulfonated Poly(phthalalizinone ether ketone)–sulfonated Graphite Nanofibers as Electrolytes for Direct Methanol Fuel Cells", RSC Advances, 6, pp.107507~107518 (2016)
- Karakaya, N., "Overmolded Hybrid Composites of Polyamide-6 on Continuous Carbon and Glass Fiber", epoxy Composites : ‘An Assessment of the Interface’, 2020, pp.131, 105771~
- Yang, G., "The Influence of Surface Treatment on the Tensile Properties of Carbon Fiber-reinforced Epoxy Composites-bonded Joints", Composites Part B : Engineering, 160, pp.446~456 (2019)
- Kim, S. H., "Effect of Hydrophilic Graphite Flake on Thermal Conductivity and Fracture Toughness of Basalt Fibers", epoxy Composites, 2018, pp.153, 9~16
- 박신무, "계면 특성을 고려한 무작위 섬유배치를 갖는 단방향 복합재료의 가로방향 기계적 물성 예측 및 보정", Composites Research, 32(5), pp.270~278 (2019), 한국복합재료학회[DOI]
- 한성현, "RFI 공정 부품 비파괴검사용 표준 기공률 시편 제조 방법 및 기공률에 따른 기계적 물성 영향에 대한 연구", Composites Research, 32(6), pp.395~402 (2019), 한국복합재료학회
- Kang, W. S., "Influence of Surface Energetics of Graphene Oxide on Fracture Toughness of Epoxy Nanocomposites", Composites Part B : Engineering, 114, pp.175~183 (2017)
- Liu, B., "Thermosetting CFRP Interlaminar Toughening with Multi-layers Graphene and MWCNTs under Mode I Fracture", Composites Science and Technology, 183, pp.107829~ (2019)
- Kilic, U., "Tensile Properties of Graphene Nanoplatelets", epoxy Composites Fabricated by Various Dispersion Techniques, 2019, pp.76, 181~191