Fabrication of Hybrid Composite Plates with an Active Frequency Selective Surface
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This paper describes the fabrication techniques and analysis of hybrid composite plates with an active frequency selective surface (FSS). For fabricating hybrid composite plate with active FSS, an active FSS with a resonance frequency located in the C band can obtained using varactor diodes. The hybrid composite plate was first designed and simulated to determine its electromagnetic properties using the commercial software HFSS. After simulation, active FSSs and hybrid composite plates were fabricated by mounting with varactor diodes. After fabrication, free space measurement was used to determine the electromagnetic properties of active FSS and the hybrid composite plates. The simulation and experimental results were in good agreement.
Abstract
This paper describes the fabrication techniques and analysis of hybrid composite plates with an active frequency selective surface (FSS). For fabricating hybrid composite plate with active FSS, an active FSS with a resonance frequency located in the C band can obtained using varactor diodes. The hybrid composite plate was first designed and simulated to determine its electromagnetic properties using the commercial software HFSS. After simulation, active FSSs and hybrid composite plates were fabricated by mounting with varactor diodes. After fabrication, free space measurement was used to determine the electromagnetic properties of active FSS and the hybrid composite plates. The simulation and experimental results were in good agreement.
참고문헌 (12)
- Munk, B.A., "Frequency Selective Surfaces: Theory and Design" (1999), Willey
- Parker, D.A., "Active Frequency Selective Surfaces with Ferroelectric Substrates", IEE Proceedings – Microwaves, Antennas and Propagation, pp.103~108 (2001)
- Lima ACdec., "Tunable Frequency Selective Surface Using Liquid Substrates", Electronics Letters, 30(4), pp.281~282 (1994)
- Vardaxoglou, J. C., "Optical Switching of Frequency Selective Surface Bandpass Response", Electronics Letters, 32(25), pp.2345~2346 (1996)
- Zendejas, J. M., "Magnetic MEMS Reconfigurable Frequency-selective Surfaces", Journal of Microelectromechanical Systems, 15(3), pp.613~623 (2006)
- Taylor, P.S., "An Active Annular Ring Frequency Selective Surface", Antennas and Propagation, IEEE Transactions on, 59, pp.3265~3271
- Mias, C., "Waveguide Demonstration of Varactor-Diode-Tunable Bandpass Frequency-Selective Surface", Microwave and Optical Technology Letters, 45, pp.62~65
- Chen, H., "Design of Frequency-selective Surfaces Radome for a Planar Slotted Waveguide Antenna", IEEE Trans. Antennas and Wireless Propagation Letters, 8, pp.1231~1233
- Wahid, M., "Bandpass radomes for reduced RCS", IEE Colloquium on. Antenna Radar Cross Section, pp.4 (1991), 1~4[DOI]
- Daniel, I. M., "Engineering Mechanics of Composite Materials" (2006), Oxford University Press
- Musil, J., "Microwave Measurement of Complex Permittivity by Free Space Methods and Their Applications" (1986), Elsevier
- Callaghan, P., "Influence of Supporting Dielectric Layers on the Transmission Properties of Frequency Selective Surfaces", IEE Proceedings-H, 138, pp.448~454