전체 적층판 접근법을 이용한 섬유강화 적층 복합재 차체 구조물의 파손평가 연구
A Study on the Evaluation of the Failure for Carbody Structures made of Laminated Fiber-Reinforced Composite Materials Using Total Laminate Approach
1
조회
0
다운로드
23
인용
0
참고문헌
키워드
초록
섬유강화 적층 복합재 차체 구조물의 강도를 평가하기 위해 전체 적층판 접근방법의 적용을 제시하였다. 180km/h급의 한국형 틸팅열차의 하이브리드 복합재 차체 기본설계를 검증하기 위해서 구조해석을 수행하였으며 또한 복합재 적층판의 강도를 구하기 위해 기계적 물성시험을 수행하였다. 결과적으로, 한국형 틸팅열차의 복합재 차체 구조물에서 발생하는 응력값들은 모두 파손영역의 안전한 범위 내에 존재하였으며 전체 적층판 접근방법은 초기 기본설계 단계에서 하이브리드 복합재 차체 구조물의 파손을 예측하는 데 매우 유용함을 증명하였다.
Abstract
In order to evaluate the strength of carbody structures of railway rolling stock made of laminated fiber-reinforced composite materials, total laminate approach was introduced. Structural analyses were conducted to check the basic design of hybrid composite carbody structures of the Korean Tilting Train eXpress(TTX) with the service speed of 180km/h. The mechanical tests were also conducted to obtain strengths of composite laminates. The results show that all stress components of composite carbody structures are inside of failure envelopes and total laminate approach is recommended to predict the failure of hybrid composite carbody structures at the stage of the basic design.
참고문헌 (14)
- "전동차 기초설명집" (2003)
- "Abaqus User's Conference", pp.1~16 (2000)
- "Effect of Transverse Cracks on the Thermomechanical Properties of Cross-Ply Laminated Composites", 34, pp.1989~
- "Refined Two-Dimensional Analysis of Cross-Ply Laminates with Transverse Cracks Based on the Assumed Crack Opening Deformation", 46, pp.1993~
- "Introduction to Composite Materials" (1980), Technomic Publishing Co.
- "The Mathematical Theory of Plasticity" (1950), Oxford University Press
- "Anisotropic Strength of Composites", 5, pp.1965~
- "Prediction of Failure Thermal Cycles in Graphite", Epoxy Composite Materials under Simulated Low Earth Orbit Environments, 2000, pp.31, 223~235
- "The Brittle Strength of Orthotropic Materials", 1, pp.1967~
- "A General Theory of Strength for Anisotropic Materials", 5, pp.1971~
- "Strength of Anisotropic Materials under Combined Stresses", 10, pp.1972~
- "Deformation and Fracture of Resin Matrix Composites in Combined Stress States", 11, pp.1977~
- "Handbook of Composites" (1998)
- "Test Methods for Static Load of Body Structures of Railway Rolling Stock"