철도차량 대차 적용 유리섬유/에폭시 4-매 주자직 적층 복합재의 인장-압축 피로특성 평가 연구
A Study on the Evaluation of Tension-Compression Fatigue Characteristics of Glass Fiber/Epoxy 4-Harness Satin Woven Laminate Composite for the Railway Bogie Application
0
조회
0
다운로드
8
인용
0
참고문헌
키워드
초록
본 논문은 철도차량 경량화 재질로 적용된 유리섬유/에폭시 4-매 주자직 적층 복합재료의 인장-압축 피로특성을 평가하였다. 유리섬유/에폭시 4-매 주자직 적층 복합재료의 인장-압축 피로시험은 경사, 위사 그리고 ±45° 방향으로 적층된 시험편에 대하여 수행하였다. 인장-압축 피로시험은 5Hz의 주파수를 갖으며, 응력비(R)는 -1로 수행하였다. 인장-압축 피로시험 수행 시 압축하중에 의한 시험편의 좌굴을 방지하기 위하여 좌굴방지지그를 설계하고 이를 시험에 적용하였다. 또한, Goodman 선도는 유리섬유/에폭시 4-매 주자직 적층 복합재의 피로특성과 수명을 평가하기 위해 사용하였다. 유리섬유/에폭시 4-매 주자직 적층 복합재료의 인장-압축 피로시험결과 경사방향 적층 복합재의 피로특성이 기존 금속재 대차에 적용되는 SM490에 비하여 우수한 것으로 나타났다.
Abstract
This paper describes the evaluations of tension-compression fatigue characteristics and life for glass fiber/epoxy laminate composite applied to railway bogie to reduce weight. Test samples of tension-compression fatigue were composed of glass fiber/epoxy 4-harness woven laminate composites with different stacking sequence of warp-direction, fill-direction and ±45°-direction. The tension-compression fatigue test was conducted with stress ratio (R) of -1 and frequency of 5Hz. Goodman diagram were used to evaluate the fatigue characteristics and life of glass fiber/epoxy 4-harness satin woven laminate composite. Anti-buckling jig was designed to prevent buckling of specimen under compression load. The test results showed that the fatigue characteristics of glass fiber/epoxy 4-harness satin woven laminate composite with stacking sequence of warp-direction had a good performance in comparison with that of SM490 used to conventional metal railway bogie.
참고문헌 (34)
- N. Y. Jung, "Light Weight by Application of Aluminum Honeycomb Sandwich Panels in End Door of Rolling Stock", Autumn Conference of The Korean Society of Machine Tool Engineers Conference, pp.284~291 (1997)
- 구정서, "소재대체에 의한 하이브리드형 차체구조의 경량화 예측 방법", 한국철도학회논문집, 9(6), pp.635~643 (2006), 한국철도학회
- T. S. Kwon, "Introduction to the material substitution design method for the weight reduction of rolling stock carbody", Autumn Conference of The Korean Society for Railway Conference, pp.446~454 (2003)
- 신광복, "설계요구조건 검증을 통한 한국형 고속 틸팅열차(TTX)의 차체 재료 선정에 관한 연구", 한국철도학회논문집, 7(2), pp.77~84 (2004), 한국철도학회
- K. B. Shin, "Evaluation of the Structural Integrity of a Sandwich Composite Train Roof Structure", Autumn Conference of The Korean Society for Railway Conference, pp.46~51 (2005)
- 신광복, "샌드위치 복합재 철도차량 루프구조물의 구조 안전성 평가 및 제작기술 연구", 한국철도학회논문집, 9(1), pp.43~49 (2006), 한국철도학회
- 신광복, "지상환경하에서 복합재료의 물성저하를 고려한 한국형 틸팅열차 하이브리드 차체 구조물의 정적안정성 평가", 대한기계학회논문집 A, 28(6), pp.807~815 (2004), 대한기계학회
- Y. S. Lee, "A Study the Application of 3D Sandwich Composite Structures to the Double-deck Light Train Carbody", Journal of the Korean Society for Railway, 3(2), pp.92~99 (2000)
- G. Belingardi, "Material Characterization of a Composite Foam Sandwich for the Front Structure of a High Speed Train", Composite Structures, 61, pp.13~25 (2003)
- A. M. Harte, "A Multilevel Approach to the Optimization of a Composite Light rail Vehicle Bodyshell", Composite Structures, 63, pp.447~453 (2004)
- 김정석, "복합재 철도차량 차체 고유진동수에 대한 해석 및 시험적 연구", 대한기계학회논문집 A, 30(4), pp.473~480 (2006), 대한기계학회
- 고희영, "샌드위치 복합재 적용 바이모달 트램 차체의 설계검증을 위한구조 성능 시험 및 해석적 비교 연구", 한국철도학회논문집, 12(4), pp.518~525 (2009), 한국철도학회
- 고희영, "샌드위치 복합재 적용 자동무인경전철 차체 구조물의 구조 안전성 및 충돌 특성 평가 연구", 한국복합재료학회지, 21(5), pp.15~22 (2008), 한국복합재료학회
- B. H. Park, "Bogie Frame Design Considering Fatigue Strength and Minimize Weight", Autumn Conference of The Korean Society for Railway, pp.131~136 (2004)
- I. S. Yun, "Integrity Evaluation of Bogie Frame by Ultrasonic Fractography Analysis", The Korean Society for Railway, 3(2), pp.112~118 (2000)
- Maurin. L, "FBG-based Smart Composite Bogie for Railway Applications", IEEE Conference, 통권 : 1, pp.91~94 (2002)
- S. R. Lee, "Fatigue Design and Fatigue Strength Evaluation of Bogie Frame", Spring Conference of The Korean Society for Railway Conference, pp.234~241 (2000)
- W. J. Kim, "Evalution of static and fatigue strength applying European standard for the bogie frame of Diesel Multiple Unit", Autumn Conference of The Korean Society for Railway Conference, pp.797~804 (2007)
- R. J. Ming-hwa, "Fatigue Degradation in Centrally Notched Quasi-Isotropic Laminates", Composite Materials, 24, pp.823~838 (1990)
- S. S. Jang, "A Reliability Analysis on the Fatigue Life Prediction in Carbon", Epoxy Composite Material, 2007, pp.10(3), 143~147
- E. K. Gamstedt, "Micromechanisms in tension-compression fatigue of composite laminates containing transverse plies", Composites Science and Technology, 59, pp.167~178 (1999)
- J. H. Byun, "Prediction of Engineering Constants for Plain and 8-Harness Satin Woven Composites", The Korean Society for Mechanical Engineers, 21(11), pp.1757~1764 (1997)
- "Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials", American Society for Testing Materials : ASTM D 3039, ~
- "Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading", American Society for Testing Materials : ASTM D 3410, ~
- S. Y. Kim, "Prediction of Fatigue Life for Holenotched Weave CFRP Plate", Spring Conference of The Korean Society of Composite Materials, pp.128~133 (2010)
- "Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials", American Society for Testing Materials : ASTM D 3479, ~
- "Fibre reinforced plastics Determination of fatigue properties under cyclic loading conditions", International Organization for Standardization : ISO 13003, ~
- Hwang, W, "Fatigue of Composites Fatigue Modulus Concept and Life Prediction", Journal of Composite Materials, 20, pp.154~165 (1986)
- 박재실, "대차 프레임용 SM490A 용접재의 피로 특성 평가", 한국정밀공학회지, 21(12), pp.146~153 (2004), 한국정밀공학회
- S. Mall, "Tension-.compression fatigue behavior of a H-VARTM manufactured unnotched and notched carbon", epoxy composite, 2009, pp.90, 201~207
- H.Bryan, "Fatigue Composite Materials" (2003), CRC Press
- Bolick.R.L, "A comparative study of unstitched,stitched,and Z-pinned plain woven composites under fatigue loading", 박사, pp.2005
- B.C.Goo, "Fatigue Life Prediction Considering Residual Stress Relaxation", International Congress of Theoretical and Applied Mechanics (2004)
- "Truck frames for railway rolling stock", Japanese Industrial Standard : JIS E 4702, ~