Evaluations of lap shear and peel strength for epoxy and polyurethane adhesive bonded Triplex sheets at cryogenic temperatures
1
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
Adhesive joints are widely used for structural joining applications in various fields and environmental conditions. Polyurethane (PU) and Epoxy adhesives are now being used for liquefied natural gas (LNG) carriers at cryogenic temperatures. This paper presents a comprehensive evaluation of epoxy and PU adhesive bonds between Triplex sheets at normal and cryogenic temperatures. The most significant result of this study is that for all adhesives tested, there is a significant decrease in peel strength at cryogenic temperatures. However, the reasons for the decrease in peel strength for epoxy and PU adhesives differ. Consequently, PU adhesives can be considered better suited for use in applications requiring high bonding performance at cryogenic conditions, such as in LNG carriers.
Abstract
Adhesive joints are widely used for structural joining applications in various fields and environmental conditions. Polyurethane (PU) and Epoxy adhesives are now being used for liquefied natural gas (LNG) carriers at cryogenic temperatures. This paper presents a comprehensive evaluation of epoxy and PU adhesive bonds between Triplex sheets at normal and cryogenic temperatures. The most significant result of this study is that for all adhesives tested, there is a significant decrease in peel strength at cryogenic temperatures. However, the reasons for the decrease in peel strength for epoxy and PU adhesives differ. Consequently, PU adhesives can be considered better suited for use in applications requiring high bonding performance at cryogenic conditions, such as in LNG carriers.
참고문헌 (26)
- J.F. Bonacci, "Externally bonded FRP for service-life extension of RC infrastructure", J. Infrastruct. Sys, 6, pp.7~33 (2000), ASCE
- H.R. III Hamilton, "Durability of FRP reinforcements for concrete", Prog. Struct. Eng. Mater, 2, pp.45~139 (2000)
- V.M. Karbhari, "Fiber reinforced composites - advanced materials for the renewal of civil infrastructure", Appl. Compos. Mater, 7, pp.95~124 (2000)
- K.W. Neale, "FRPs for structural rehabilitation: a survey of recent progress", Prog. Struct. Eng. Mater, 2, pp.8~133 (2000)
- M.A. Shaw, "Case studies of carbon fibre bonding worldwide, In Strengthening of Reinforced Concrete Structures Using Externally-Bonded FRP Composites in Structural and Civil engineering" (1999), Woodhead Publishing
- D.F. Atiken, "Engineer’s Handbook of Adhesives" (1972), The Machinery Publishing Company
- S.M. Kumar, "Mechanical behavior of glass", epoxy composites at liquid nitrogen temperature, 2008, pp.27, 937~
- K. Frisch, "Advances in Polyurethane Science and Technology", Echnomic, Westport, 1 (1984)
- Z. Wirpsza, "Polyurethanes-Chemistry, Technology and Applications" (1993), PTR Prentice Hall
- 손민영, "극저온에서 유리섬유강화플라스틱 표면의 유리섬유와 폴리우레탄 접착제간의 접착특성이 전체 박리강도에 미치는 영향에 대한 연구", 한국복합재료학회지, 22(4), pp.13~19 (2009), 한국복합재료학회
- D.H. Kaelble, "Theory and analysis of peel adhesion: mechanisms and mechanics", Trans. Soc. Rheol, 3, pp.161~ (1959)
- D.H. Kaelble, "Theory and analysis of peel adhesion: bond stress and distributions", Trans. Soc. Rheol, 4, pp.45~ (1960)
- D.H. Kaelble, "Peel adhesion: micro-fracture mechanics of interfacial unbonding of polymers", Trans. Soc. Rheol, 9, pp.135~ (1965)
- D.H. Kaelble, "Biaxial bond stress analysis in peeling", Trans. Soc. Rheol, 18, pp.219~ (1974)
- J.J. Bikerman, "Theory of peeling through a Hookean solid", J. Appl. Phys, 28, pp.1484~ (1957)
- J.L. Gardon, "Peel adhesion I: some phenomenological aspects of the test", J. Appl. Polym. Sci, 7, pp.625~ (1963)
- J.L. Gardon, "Peel adhesion II: a theoretical analysis", J. Appl. Polym. Sci, 7, pp.643~ (1963)
- G.J. Spies, "The peeling test on redux-bonded joints", Aircraft Eng, 30, pp.2~ (1953)
- J. Jouwersma, "On the theory of peeling", J. Appl. Polym. Sci, 45, pp.253~ (1960)
- A.J. Kinloch, "Small scale aluminium", epoxy peel test specimens and measurement of adhesive fracture energy, 1994, pp.66, 45~
- A.N. Gent, "Adhesion of viscoelastic materials to rigid substrates III: energy criterion for failure", J. Appl. Polym. Sci, 9, pp.659~ (1971)
- E.H. Andrews, "Mechanics of adhesive failure I", Proc. R. Soc. Lond. A, 332, pp.385~ (1973)
- E.H. Andrews, "Mechanics of adhesive failure II", Proc. R. Soc. Lond. A, 332, pp.401~ (1973)
- "IS0 4578, Adhesives - Determination of peel resistance of high-strength adhesive bonds - Floating roller method", ~
- Stanley R. Sandler, "Polyurethanes as cryogenic adhesives", Journal of Applied Polymer Science, 9, pp.3909~3916 (1965)
- Edward M. Petrie, "Handbook of adhesives and sealants", pp.705~