Assessment of Cryogenic Material Properties of R-PUF Used in the CCS of an LNG Carrier
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Reinforced polyurethane foam (R-PUF), a material for liquefied natural gas cargo containment systems, is expected to have different mechanical properties depending on its stacking position of foaming as the glass fiber reinforcement of R-PUF sinks inside R-PUF under the influence of gravity. In addition, since R-PUF is not a homogeneous material, it is also expected that the coordinate direction within this material has a great correlation with the mechanical properties. So, this study was conducted to confirm this correlation with the one between the mechanical properties and the stacking position. In particular, in this study, R-PUF of 3 different densities (130, 170, and 210 kg/m3) was used, and tensile, compression, and shear tests of this material were performed under 5 temperatures. As a result of the tests, it was confirmed that the strength and modulus of elasticity of the material increased as the temperature decreased. Specifically, the strength and modulus of elasticity in the Z direction, which was the lamination direction, tended to be lower than those in the other directions. Finally, the strength and elastic modulus of different specimens of the material found at the bottom of their lamination compared to the specimens with these properties found at positions other than their lamination bottom were evaluated. Further analysis confirmed that as the temperature decreased, hardening of R-PUF occurred, indicating that the strength and modulus of elasticity increased. On the other hand, as the density of R-PUF increased, a sharp increase in strength and elastic modulus of R-PUF was observed.
Abstract
Reinforced polyurethane foam (R-PUF), a material for liquefied natural gas cargo containment systems, is expected to have different mechanical properties depending on its stacking position of foaming as the glass fiber reinforcement of R-PUF sinks inside R-PUF under the influence of gravity. In addition, since R-PUF is not a homogeneous material, it is also expected that the coordinate direction within this material has a great correlation with the mechanical properties. So, this study was conducted to confirm this correlation with the one between the mechanical properties and the stacking position. In particular, in this study, R-PUF of 3 different densities (130, 170, and 210 kg/m3) was used, and tensile, compression, and shear tests of this material were performed under 5 temperatures. As a result of the tests, it was confirmed that the strength and modulus of elasticity of the material increased as the temperature decreased. Specifically, the strength and modulus of elasticity in the Z direction, which was the lamination direction, tended to be lower than those in the other directions. Finally, the strength and elastic modulus of different specimens of the material found at the bottom of their lamination compared to the specimens with these properties found at positions other than their lamination bottom were evaluated. Further analysis confirmed that as the temperature decreased, hardening of R-PUF occurred, indicating that the strength and modulus of elasticity increased. On the other hand, as the density of R-PUF increased, a sharp increase in strength and elastic modulus of R-PUF was observed.
참고문헌 (10)
- 안재혁, "글라스버블", 폴리우레탄 폼 복합재료의 기계적 및 열적 특성평가, 2018, pp.42(9), 708~714[DOI]
- Denay, A.G, "Compression Behavior of Glass-fiber-reinforced and Pure Polyurethane Foams at Negative Temperatures Down to Cryogenic Ones", Journal of Cellular Plastics, 49(3), pp.209~222 (2013)[DOI]
- 장철웅, "멤브레인 LNG 선박용 강화 폴리우레탄폼의 극저온 거동 연구", 한국해양공학회지, 27(1), pp.74~79 (2013), 한국해양공학회
- 한대석, "The effects of glass fiber reinforcement on the mechanical behavior of polyurethane foam", Journal of Mechanical Science and Technology, 24(1), pp.263~266 (2010), 대한기계학회
- 김명성, "반복 충격이 유리섬유 강화 폴리우레탄 폼의 기계적 성능에 미치는 영향", 한국해양공학회지, 33(1), pp.85~91 (2019), 한국해양공학회[DOI]
- 김진연, "이종 강화재를 첨가한 폴리우레탄 폼의 기계적 및 열적 특성과 제작 시 초음파 분산의 영향", 대한조선학회 논문집, 56(6), pp.515~522 (2019), 대한조선학회[DOI]
- Chi-Seung Lee, "A temperature- and strain-rate-dependent isotropic elasto-viscoplastic model for glass-fiber-reinforced polyurethane foam", Materials & Design, 84, pp.163~172 (2015), Elsevier BV[DOI]
- 오종호, "극저온용 폴리우레탄 폼에 미치는 케블라 펄프의 영향", 대한조선학회 논문집, 55(6), pp.514~520 (2018), 대한조선학회[DOI]
- 박성보, "폴리머 폼의 선박 및 해양구조물 적용을 위한 극저온 기계적 거동 특성 분석", 대한조선학회 논문집, 51(6), pp.495~502 (2014), 대한조선학회
- Park, S. B, "Polymeric Foams for Cryogenic Temperature Application : Temperature Range for Non-recovery and Brittlefracture of Microstructure", Composite Structures, 136, pp.258~269 (2016)[DOI]