다양한 SiC 섬유를 적용한 실리콘 용융 침투 공정 SiCf/SiC 복합재료의 제조 및 특성 변화 연구
Liquid Silicon Infiltrated SiCf/SiC Composites with Various Types of SiC Fiber
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
섬유강화 세라믹 복합재료 제조 방법 중 실리콘 용융 침투 공정법(Liquid Silicon Infiltration-LSI)은 낮은 제조단가 및 짧은 공정 시간 등의 장점을 가진다. 본 연구에서는 고온 내산 특성이 우수한 SiC 섬유를 LSI 공정에 적용하기 위해 결정화도와 산소함량이 다른 세 가지 SiC 섬유(Tyranno SA, LoxM, Tyranno S)를 이용하여 SiCf/SiC 복합재료를 제작하고 그 적용 가능성을 확인하였다. LSI 공정을 통해 제조된 SiCf/SiC 복합재료는 모두 2% 미만의 기공률로 치밀화 되었지만, 섬유의 결정화도와 산소함량에 따라 3점 굽힘강도는 큰 차이를 나타냈다. 이는 1450oC 이상의 높은 LSI 공정 온도에 SiC 섬유가 노출 될 경우 비정질 SiOC상이 결정화되며 수축하는 현상과 섬유 내 잔존 산소-모재 내 탄소의 반응으로 인한 미세구조 차이에 기인하는 것으로 판단된다. 이는 SEM, XRD 및 TEM 분석을 통해 섬유 종류별 공정온도에서의 특성 변화로 확인하였다.
Abstract
Liquid silicon infiltration, which is one of the methods of producing fiber reinforced ceramic composites, has several advantages such as low fabrication cost and good shape formability. In order to confirm LSI process feasibility of SiC fiber, SiCf/SiC composites were fabricated using three types of SiC fibers (Tyranno SA, LoxM, Tyranno S) which have different crystallinity and oxygen content. Composites that were fabricated with LSI process were well densified by less than 2% of porosity, but showed an obvious difference in 3-point bending strength according to crystallinity and oxygen content. When composites in LSI process was exposed to a high temperature, crystallization and micro structural changes were occurred in amorphous SiOC phase in SiC fiber. Fiber shrinkage also observed during LSI process that caused from reaction in fiber and between fiber and matrix. These were confirmed with changes of process temperature by SEM, XRD and TEM analysis.
참고문헌 (22)
- Ishikawa, T., "Advances in Inorganic Fibers", Advances in Polymer Science, 178, pp.109~144 (2005)
- Schmalzried, C., "Volume 2: Materials and Properties; Chapter 4", pp.131~227 (2010), Wiley VCH
- Takeda, M., "Properties of Polycarbosilane Derived Silicon Carbide Fibers with Various C", Si Compositions, 1999, pp.59, 787~792
- Takeda, M., , 18th Annual Conference on Composites and Advanced Ceramic Materials A: Ceramic Engineering and Science Proceedings, 15, pp.133~ (2008)
- Schawaller, D., "Ceramic Filament Fibers – A Review", Macromolecular Materials and Engineering, 297(6), pp.502~522 (2012)
- Ishikawa, T., "High Strength Alkali Resistant Sintered SiC Fiber Stable to 2, 200oC", Nature, 391, pp.773~775 (1998)
- Yamamura, T., "Development of a New Continuous Si-Ti-C-O Fibre Using an Organometallic Polymer Precursor", Journal of Materials Science, 23, pp.2589~2594 (1988)
- Igawa, N., "Fabrication of SiC Fiber Reinforced SiC Composite by Chemical Vapor Infiltration for Excellent Mechanical Properties", Journal of Physics and Chemistry of Solids, 66, pp.551~554 (2005)
- Jones, R. H., "Promise and Challenges of SiCf", SiC Composites for Fusion Energy Applica-tions, 2002, pp.307-311, 1057~1072
- Kim, W. J., "Effect of SiC Whisker Formation on the Densification of Tyranno SA", SiC Composites Fabricated by CVI Process, 2006, pp.81, 931~936
- Katoh, Y., "Properties and Radiation Effects in High-Temperature Pyrolyzed PIP-SiC", SiC, 2001, pp.289, 42~47
- Jones, R., "Polymer Derived Ceramic Matrix Composites", Composites Part A : Applied Science and Manufacturing, 30, pp.569~575 (1999)
- Krenkel, W., "Cost Effective Processing of CMC Composites by Melt Infiltration(LSI process)", Ceramic Engineering and Science Proceedings, pp.443~454 (2001)
- Sayano, A., "Development of a Reaction Sintered Silicon Carbide Matrix Composite", Journal of Nuclear Materials, 271-272, pp.467~471 (1999)
- Takeda, M., "Thermal Stability of the Low Oxygen Content Silicon Carbide Fiber, Hi-NicalonTM", Composites Science and Technology, 59, pp.813~819 (1999)
- Kim, Y. W., "Fabrication of Open-Cell, Microcellular Silicon Carbide Ceramics by Carbothermal Reduction", Journal of the American Ceramic Society, 88, pp.2949~2951 (2005)
- Grande, T., "Effect of Weight Loss on Liquid Phase Sintered Silicon Carbide", Journal of the American Ceramic Society, 80, pp.1047~1052 (1997)
- Mulla, M. A., "Low Temperature Pressureless Sintering of β silicon Carbide with Aluminum Oxide and Yttrium Oxide Addition", Am Ceram Soc Bull, 70, pp.439~443 (1991)
- Fukushima, M., "Microstructural Characterization of Porous Silicon Carbide Membrane Support With and Without Alumina Additive", Journal of the American Ceramic Society, 89, pp.1523~1529 (2006)
- Eom, J. H., "Microstructure and Properties of Porous Silicon Carbide Ceramics Fabricated by Carbothermal Reduction and Subsequent Sintering Process", Materials Science and Engineering : A, 464, pp.129~134 (2007)
- Patel, M., "High temperature C", C–SiC Composite by Liquid Silicon Infiltration : a Literature Review, 2012, pp.35, 63~73
- Schulte-Fischedick, J., "The Morphology of Silicon Carbide in C", C–SiC Composites, 2002, pp.332, 146~152