High Flame Retardancy and High-strength of Polymer Composites with Synergistically Reinforced MOSw and EG
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Polymers are inherently vulnerable to flame, which limits their application to various high-tech industries. In addition, environmental regulations restrict the use of halogen-based flame retardants which has best flame-retardant effect. There are inorganic flame retardants and phosphorous flame retardants as representative nonhalogen-based flame retardants. However, high content of flame retardants is required to impart high flame retardancy of the polymers, and this leads to a decrease in mechanical properties. In this research, a new approach for inorganic flame retardant-based polymer composites with high mechanical properties and flame retardancy was suggested. Inorganic flame retardants called as magnesium oxysulfate whisker (MOSw) were used in this research. MOSw can extinguish fire by releasing water and non-combustible gases when exposed to flame. In addition, they have reinforcing effect when added into the polymer with its high aspect ratio. Expandable graphite (EG) was used as a flame-retardant supplement by helping to form a more dense char layer. Through this research, it is expected that it can be applied to various industries requiring flame retardancy such as automobile, and architecture by replacing halogen-based flame polymer composites.
Abstract
Polymers are inherently vulnerable to flame, which limits their application to various high-tech industries. In addition, environmental regulations restrict the use of halogen-based flame retardants which has best flame-retardant effect. There are inorganic flame retardants and phosphorous flame retardants as representative nonhalogen-based flame retardants. However, high content of flame retardants is required to impart high flame retardancy of the polymers, and this leads to a decrease in mechanical properties. In this research, a new approach for inorganic flame retardant-based polymer composites with high mechanical properties and flame retardancy was suggested. Inorganic flame retardants called as magnesium oxysulfate whisker (MOSw) were used in this research. MOSw can extinguish fire by releasing water and non-combustible gases when exposed to flame. In addition, they have reinforcing effect when added into the polymer with its high aspect ratio. Expandable graphite (EG) was used as a flame-retardant supplement by helping to form a more dense char layer. Through this research, it is expected that it can be applied to various industries requiring flame retardancy such as automobile, and architecture by replacing halogen-based flame polymer composites.
참고문헌 (11)
- Ning, Q. G., "A Closed-Form Solution of the Transverse Effective Thermal Conductivity of Woven Fabric Composites", Journal of Composite Materials, 29(17), pp.2280~2294 (1995)
- 박용빈, "풀아웃 하중을 받는 복합재 샌드위치 체결부의 파손거동 연구", Composites Research, 24(1), pp.17~23 (2011), 한국복합재료학회
- Vinson, J. R., "The Behavior of Sandwich Structures of Isotropic and Composite Materials" (2018), Routledge
- Jeong, K. W., "A Study on the Failure Mode and Load of the Composite Key Joint", Journal of Composite Materials, 48(12), pp.1417~1427 (2014)
- M.N.Prabhakar, "A Review on the Flammability and Flame Retardant Properties of Natural Fibers and Polymer Matrix Based Composites", Composites Research, 28(2), pp.29~39 (2015), 한국복합재료학회
- Cartié, D. D., "Effect of z-fibresTM on the Delamination Behaviour of Carbon-fibre", epoxy Laminates, Cranfield University, 2000
- Seidi, F., "Flame Retardant Polypropylenes : A Review", Polymers, 12(8), pp.1701~ (2020)
- He, W., "Flame Retardant Polymeric Nanocomposites through the Combination of Nanomaterials and Conventional Flame Retardants", Progress in Materials Science, 114, pp.100687~ (2020)
- 이동우, "폴리프로필렌 기반 자기강화 복합재료의 기계적물성 및 난연성 연구", Composites Research, 30(3), pp.223~228 (2017), 한국복합재료학회
- 김종호, "난연성 폴리아크릴로니트릴 고분자 섬유 및 복합소재 연구 동향", Composites Research, 32(6), pp.342~348 (2019), 한국복합재료학회
- 문소윤, "무기 필러가 첨가된 현무암섬유 강화 에폭시 복합재료의 난연 특성", Composites Research, 32(6), pp.368~374 (2019), 한국복합재료학회