경계면 손상을 고려한 적층복합재료에 대한 멀티스케일 피로 손상 모델
Multi-scale progressive fatigue damage model for unidirectional laminates with the effect of interfacial debonding
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
본 논문에서는 복합재료의 섬유와 기지사이의 경계면 손상을 고려한 멀티스케일 점진적 피로 손상 모델을 제안한다. 먼저 점진적인 경계면 손상을 고려하기 위해 서로 다른 4개의 경계면 상태를 정의한 미소구조 모델을 도입하였다. 각각의 상태에 대한 부피분율은 피로 하중의 사이클 수가 증가함에 따라 온전한 상태의 계면에서 완전 박리 상태의 계면으로의 전환이 일어난다. 손상된 경계면의 에쉘비 텐서(Eshelby’s tensor)를 계산하기 위해 선형 스프링 모델이 사용되었으며 균질화 방법을 통해 복합재료의 유효 물성을 얻었다. 또한 복합재료의 피로거동을 묘사하기 위해 교번 응력에 대한 섬유, 기지, 그리고 섬유-기지 간의 계면 각각에 대한 손상 변수들이 정의되었고 이를 chaotic firefly 알고리즘을 통해 손상 변수를 특성화 하였다. 제안된 모델은 유한요소해석 프로그램 ABAQUS의 UMAT subroutine으로 구현되어 AS4/3501-6 복합재료의 단일방향 라미네이트(unidirectional laminate) 시편들([0]8, [90]8,[30]16)을 통해 성공적으로 검증되었다.
Abstract
This paper presents a multi-scale progressive fatigue damage model incorporating the model for interfacial debonding between fibers and matrix. The micromechanics model for the progressive interface debonding was adopted, which defined the four different interface phases: (1) perfectly bonded fibers; (2) mild imperfect interface; (3) severe imperfect interface; and (4) completely debonded fibers. As the number of cycles increases, the progressive transition from the perfectly bonded state to the completely debonded fiber state occurs. Eshelby’s tensor for each imperfect state is calculated by the linear spring model for a damaged interface, and effective elastic properties are obtained using the multi-phase homogenization method. The fatigue damage evolution formulas for fiber, matrix and interface were proposed to demonstrate the fatigue behavior of CFRP laminates under cyclic loading. The material parameters for the fiber/matrix fatigue damage were characterized using the chaotic firefly algorithm. The model was implemented into the UMAT subroutine of ABAQUS, and successfully validated with flat-bar UD laminate specimens ([0]8, [90]8, [30]16) of AS4/3501-6 graphite/epoxy composite.
참고문헌 (26)
- Hashin, Z., "A Fatigue Failure Criterion for Fiber Reinforced Materials", Journal of Composite Materials, 7(4), pp.448~464 (1973)
- Reifsnider, K., "A Micromechanics Model for Composites under Fatigue Loading", International Journal of Fatigue, 13(2), pp.149~156 (1991)
- Mori, T., "Average Stress in Matrix and Average Elastic Energy of Materials with Misfitting Inclusions", Acta Metallurgica, 21(5), pp.571~574 (1973)
- Jen, M. -H., "Strength and Life in Thermoplastic Composite Laminates under Static and Fatigue Loads. Part I:Experimental", International Journal of Fatigue, 20(9), pp.605~615 (1998)
- Whitworth, H. A., "A Stiffness Degradation Model for Composite Laminates under Fatigue Loading", Composite Structures, 40(2), pp.95~101 (1997)
- Yao, W. X., "A New Cumulative Fatigue Damage Model for Fibre-reinforced Plastics", Composites Science and Technology, 60(1), pp.59~64 (2000)
- Khan, Z., "Fatigue Life Predictions in Woven Carbon Fabric", polyester Composites Based on Modulus Degradation, 2001, pp.20(5), 377~398
- Shokrieh, M. M., "Progressive Fatigue Damage Modeling of Composite Materials, Part I : Modeling", Journal of Composite Materials, 34(13), pp.1056~1080 (2000)
- Shokrieh, M. M., "Progressive Fatigue Damage Modeling of Composite Materials, Part II : Material Characterization and Model Verification", Journal of Composite Materials, 34(13), pp.1081~1116 (2000)
- Papanikos, P., "Modelling of Fatigue Damage Progression and Life of CFRP Laminates", Fatigue & Fracture of Engineering Materials & Structures, 26(1), pp.37~47 (2003)
- Ye, L., "Role of Matrix Resin in Delamination Onset and Growth in Composite Laminates", Composites Science and Technology, 33(4), pp.257~277 (1988)
- Hashin, Z., "Failure Criteria for Unidirectional Fiber Composites" (1980)
- Kennedy, C. R., "A Multiaxial Fatigue Damage Model for Fibre Reinforced Polymer Composites", Composite Structures, 106, pp.201~210 (2013)
- Zhang, L., "Experimental Investigation and Multiscale Simulation on the Bending Fatigue of 2D SiCf", SiC Composites, 2021, pp.144, 106051~
- Sayyidmousavi, A., "A Multiscale Approach for Fatigue Life Prediction of Polymer Matrix Composite Laminates", Journal of Reinforced Plastics and Composites, 34(13), pp.1099~1109 (2015)
- Tamboura, S., "Experimental and Numerical Multi-scale Approach for SheetMolding-Compound Composites Fatigue Prediction Based on Fiber-matrix Interface Cyclic Damage", International Journal of Fatigue, 135, pp.105526~ (2020)
- Lee, H. -K., "3D-damage Model for Fiber-reinforced Brittle Composites with Microcracks and Imperfect Interfaces", Journal of Engineering Mechanics, 135(10), pp.1108~1118 (2009)
- Ju, J., "A Micromechanical Damage Model for Effective Elastoplastic Behavior of Ductile Matrix Composites Considering Evolutionary Complete Particle Debonding", Computer Methods in Applied Mechanics and Engineering, 183(3-4), pp.201~222 (2000)
- Eshelby, J. D., "The Determination of the Elastic Field of an Ellipsoidal Inclusion, and Related Problems", Proceedings of the royal Society of London. Series A. Mathematical and Physical Sciences, 241(1226), pp.376~396 (1957)
- Mura, T., "Micromechanics of Defects in Solids" (2013), Springer Science & Business Media
- Murakami, S., "Mechanical Modeling of Material Damage", Journal of Applied Mechanics, 55, pp.280~286 (1988)
- Lee, S., "Applicability of the Interface Spring Model for Micromechanical Analyses with Interfacial Imperfections to Predict the Modified Exterior Eshelby Tensor and Effective Modulus", Mathematics and Mechanics of Solids, 24(9), pp.2944~2960 (2019)
- Lee, S., "Modified Eshelby Tensor for an Anisotropic Matrix with Interfacial Damage", Mathematics and Mechanics of Solids, 24(6), pp.1749~1762 (2019)
- Mohammadi, B., "Development of a Continuum Damage Model for Fatigue Life Prediction of Laminated Composites", Composites Part A: Applied Science and Manufacturing, 93, pp.163~176 (2017)
- Kaddour, A. S., "Mechanical Properties and Details of Composite Laminates for the Test Cases Used in the Third World-wide Failure Exercise", Journal of Composite Materials, 47(20-21), pp.2427~2442 (2013)
- Gandomi, A. H., "Firefly Algorithm with Chaos", Communications in Nonlinear Science and Numerical Simulation, 18(1), pp.89~98 (2013)