본문 바로가기
KERD
논문KCI 등재

PSSC 합성거더 교량의 프리스트레스 효과 및 신뢰도 해석

Analysis of Prestress Effect and Reliability of PSSC Composite Girder Bridge

0

조회

0

다운로드

0

인용

0

참고문헌

키워드

주제분류안전공학

초록

ember force, strain and stress distribution of a section are obtained for optimized standard 25m~45m PSSC composite bridge subjected to dead and live load in order to interpret the effect of prestressing and deformation of tendon. The stress and strain distribution and moment capacity are obtained for both noncomposite and composite section and for allowable stress limit state, yield limit state and strength limit state. Reliability analysis is conducted after assuming limit states for stress and flexural strength. The reliability index for standard PSSC composite bridge which is designed to satisfy the allowable stress for flexural strength are higher than 3.5 which is required reliability indexes on American code for LRFD. Reliability of PSSC girder which is designed based on allowable stress of bridge design code is high for flexural strength.

Abstract

ember force, strain and stress distribution of a section are obtained for optimized standard 25m~45m PSSC composite bridge subjected to dead and live load in order to interpret the effect of prestressing and deformation of tendon. The stress and strain distribution and moment capacity are obtained for both noncomposite and composite section and for allowable stress limit state, yield limit state and strength limit state. Reliability analysis is conducted after assuming limit states for stress and flexural strength. The reliability index for standard PSSC composite bridge which is designed to satisfy the allowable stress for flexural strength are higher than 3.5 which is required reliability indexes on American code for LRFD. Reliability of PSSC girder which is designed based on allowable stress of bridge design code is high for flexural strength.

참고문헌 (11)

  1. 아주대학교 토목기술 연구센터, "압연형강과 긴장재를 이용한 강교량 기술개발" (2004)
  2. 경원대학교 산학협력단, "PSSC 합성거더 연속화 실용화 연구" (2006)
  3. 건설교통부, "도로교설계기준", ~ (2005)
  4. 신동구, "정모멘트를 받는 강 합성단면 휨저항의 통계적 특성 분석", 대한토목학회 2005년 학술발표회 (2005)
  5. 장승필, "합성구조론" (2005), 구미서관
  6. 황철성, "PSSC 거더 교량의 한계상태별 신뢰도 비교", 구조물진단학회지, 11(1), pp.171~180 (2007), 한국구조물진단유지관리공학회
  7. 황철성, "PSSC 합성거더 교량의 비선형 거동 분석 및 신뢰도 해석", 구조물진단학회지, 12(1), pp.157~166 (2008), 한국구조물진단유지관리공학회
  8. Calibration of LRFD Bridge Design Code, "Nowak, A. S.", Transportation Research Board, ~, pp.NCHRP Report 368 (1999)
  9. Nowak, A. S., "Reliability of Structures" (2000), McGraw-Hill
  10. Nowak, A. S., "Calibration of the Ontario Highway Bridge Design Code 1991 edition", Canadian Journal of Civil Engineering, 21, pp.25~35 (1994)
  11. Nowak, A. S., "Calibration of Design Code for Buildings(ACI 318): Part 1-Statistical Models for Resistance", ACI Structural Journal, pp.377~382 (2003)

관련 논문AI추천

이 간행물의 다른 논문 (21건)