PSSC 합성거더 교량의 비선형 거동 분석 및 신뢰도 해석
Analysis of Nonlinear Behavior and Reliability of PSSC Composite Girder Bridge
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Member force, strain and stress distribution of a section are obtained for prestressed steel and concrete(PSSC) composite bridge subjected to dead and live load in order to interpret the effect of prestressing and deformation of tendon. The stress and strain distribution and moment capacity are obtained for both noncomposite and composite section and for allowable stress limit state, yield limit state and strength limit state. Reliability analysis is conducted after assuming limit states for deflection, stress and flexural strength. Comparing that the reliability index for stress is near 0 for example section which is designed to satisfy the allowable stress exactly, the reliability indexes for deflection and flexural strength are high. Reliability of PSSC girder which is designed based on allowable stress of bridge design code is high for deflection and flexural strength.
Abstract
Member force, strain and stress distribution of a section are obtained for prestressed steel and concrete(PSSC) composite bridge subjected to dead and live load in order to interpret the effect of prestressing and deformation of tendon. The stress and strain distribution and moment capacity are obtained for both noncomposite and composite section and for allowable stress limit state, yield limit state and strength limit state. Reliability analysis is conducted after assuming limit states for deflection, stress and flexural strength. Comparing that the reliability index for stress is near 0 for example section which is designed to satisfy the allowable stress exactly, the reliability indexes for deflection and flexural strength are high. Reliability of PSSC girder which is designed based on allowable stress of bridge design code is high for deflection and flexural strength.
참고문헌 (10)
- 신영석, "상용압연 형강을 이용한 콘크리트 합성거더의 다단계 긴장력 최적설계", 한국전산구조공학회논문집, 19(2), pp.115~124 (2006), 한국전산구조공학회
- "압연형강과 긴장재를 이용한 강교량 기술개발" (2004), 아주대학교 토목기술 연구센터
- "PSSC 합성거더 연속화 실용화 연구" (2006), 경원대학교 산학협력단
- 황철성, "PSSC 거더 교량의 한계상태별 신뢰도 비교", 구조물진단학회지, 11(1), pp.171~180 (2007), 한국구조물진단유지관리공학회
- 건설교통부, "도로교설계기준", 건설교통부, ~ (2005)
- 심창수, "합성구조론" (2005), 구미서관
- Calibration of LRFD Bridge Design Code, "Nowak, A. S.", Transportation Research Board., ~, pp.NCHRP Report 368 (1999)
- Nowak, A. S., "Reliability of Structures" (2000), McGraw-Hill
- Nowak, A. S., "Calibration of the Ontario Highway Bridge Design Code 1991 edition", Canadian Journal of Civil Engineering, 21, pp.25~35 (1994)
- Nowak, A. S., "Calibration of Design Code for Buildings (ACI 318): Part 1-Statistical Models for Resistance", ACI Structural Journal, pp.377~382 (2003)