대구경(57 mm) 및 고강도(550 MPa) 확대머리 철근의 콘크리트 격납구조물 적용을 위한 코드개정에 관한 연구
Code Change for using the High-Strength(550 MPa) Headed Deformed Bars of Large-Sized Diameter(57 mm) in Concrete Containments
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
일반적으로, 원전구조물은 다량의 철근이 사용되어 시공과정에서 여러 잠재적 문제점이 발생한다. 특히, 구조부재의 연결부위는 수많은 갈고리철근, 매입철물과 주변 철근 등에 의해 심각한 과밀현상이 발생하므로 여타 다른 부위보다 콘크리트 타설에 더 큰 어려움이 야기된다. 원전구조물에 사용되는 일반강도(ASTM A615 Gr.60)의 대구경(43 mm & 57 mm) 표준갈고리 철근을 대신하여 고강도(ASTM A615 Gr.80)의 대구경(43 mm & 57 mm) 확대머리 철근을 사용할 수 있도록 관련 기술기준을 개정하여 철근 과밀배근 문제를 해결하는 데 본 연구의 목적이 있다. 확대머리 철근을 원전구조물에 효과적으로 사용하기 위해서는 기존의 정착성능을 그대로 유지하거나 그 이상으로 증가시키면서 사용 제한요건을 완화는 방안을 찾아야 하므로 철근직경, 철근 항복강도, 측면피복 두께와 같이 확대머리 철근의 사용을 제한하는 변수 영향을 검토할 수 있는 실험결과를 분석하여 정착성능을 평가하였다.
Abstract
Generally, significant amount of reinforcements are used in nuclear power plant structures and it may cause several potential problems during the construction. In particular, it is more difficult to pour concrete into structural member joint area than other areas because of the significant congestion of the joint area due to a lot of hooked bars, embedded materials, and other reinforcements. The purpose of this study is to solve these problems due to the reinforcement congestion by using the high-strength(ASTM A615 Gr.80) headed deformed bars of large-sized diameter(43 mm & 57 mm) in nuclear power plant structures as a alternative of standard hooked bars. In order to use headed deformed bars effectively, It is necessary to find the method how to relax limits on their use while maintaining or improving the anchorage capacity. Therefore, this study will analyze the results of tests planned to evaluate the influence of the restricted variables, such as bar size, yield strength, clear cover thickness.
참고문헌 (26)
- Building Code Requirements for Structural Concrete (ACI 318-08) and Commentary, "ACI Committee 318", American Concrete Institute, 203~212 (2008)
- ACI Committee 349, "Code Requirements for Nuclear Safety-Related Concrete Structures(ACI 349-13) and Commentary", American Concrete Institute, 72~75 (2013)
- ASME Boiler and Pressure Vessel Committee on Nuclear Power, "Sec.III. Div.2 - Code for Concrete Containments, The American Society of Mechanical Engineers", The American Society of Mechanical Engineers, 62~66 (2015)
- 배민서, "보-기둥 접합부에 정착된 550 MPa 43 mm 갈고리철근의 거동", 콘크리트학회 논문집, 28(5), pp.611~620 (2016), 한국콘크리트학회
- Bashandy, T. R., "Application of Headed Bars in Concrete Members", phD, pp.1996
- 최철민, "외부 보-기둥 접합부에 정착된 확대머리철근 정착강도", 석사, 건축공학과 건축구조전공, pp.2014
- Chun, S. C., "Lap Splice Tests Using High- Strength Headed Bars of 550 MPa(80 ksi) Yield Strength", ACI Structural Journal, 112(5), pp.679~688 (2015), American Concrete Institute
- Chun, S. C., "Side-Face Blowout Failure of Large-Diameter High-Strength Headed Bars in Beam-Column Joints", ACI Structural Journal, 114(1), pp.161~172 (2017), American Concrete Institute
- Chun, S. C., "Side-Face Blowout Strength of 43 and 57 mm (No. 14 and No. 18) Hooked Bars in Beam-Column Joints", ACI Structural Journal, 114(5), pp.1~12 (2015), American Concrete Institute
- 천성철, "겹침이음 실험을 통한 SD600 확대머리철근의 정착강도 평가", 콘크리트학회 논문집, 25(2), pp.217~224 (2013), 한국콘크리트학회[DOI]
- DeVries, R. A., "Anchorage Capacity in Concrete of Headed Reinforcement with Shallow Embedments", ACI Structural Journal, 96(5), pp.728~736 (1999), American Concrete Institute
- DeVries, R. A., "Anchorage of Headed Reinforcement in Concrete", phD, pp.1996
- SP 180-16 : Effect of Transverse Reinforcement and Bonded Length on the Side-Blowout Capacity of Headed Reinforcement, "DeVries, R. A.", American Concrete Institute, 367~389 (1998)
- Hong, J. S., "Evaluation on Anchorage Capacity of Headed Bars with Large Diameter in TTC Node", pp.2013
- Jung, H. S., "Evaluation on Anchorage Capacity of Large-Diameter Headed Bars with High-Strength", phD, pp.2016
- Technical Report 2017-5000-3339-전-0077TR : Development of Application Technology of High-Strength Reinforcing Bars for Nuclear Power Plant Structures, "KHNP-Central Research Institute", Korea Hydro & Nuclear Power Co., LTD, 52~73 (2016)
- Kim, K. J., "Numerical Approach of Effect of Transverse Reinforcement on Headed Bars with Large Diameter in TTC Node", Master, pp.2015
- SNB Nuclear safety Related Structures-Concrete Containments, "Korea Electric Power Industry Code Structural T", C, 2015, pp.86~92
- SNCNuclear safety Related Structures-Nuclear Safety-Related Concrete Structures, "Korea Electric Power Industry Code Structural T", C, 2015, pp.91~100
- 이진곤, "겹침이음실험을 통한 SD600 확대머리철근의 정착강도", 석사, 건축공학과 건축구조전공, pp.2013
- 이수영, "겹침 이음 실험을 통한 대구경 확대머리철근의 정착강도", 석사, 건축공학과, pp.2014
- Marques, J. L. G., "A Study of Hooked Bar Anchorages in Beam-Column Joints", ACI Journal, 72(3), pp.198~209 (1975), American Concrete Institute
- Thompson, M. K., "Behavior and Capacity of Headed Reinforcement", ACI Structural Journal, 103(4), pp.522~530 (2006), American Concrete Institute
- Thompson, M. K., "CCT Nodes Anchored by Headed Bars. Part 2 : Capacity of Nodes", ACI Structural Journal, 103(1), pp.65~73 (2006), American Concrete Institute
- Thompson, M. K., "Lap Splices Anchored by Headed Bars", ACI Structural Journal, 103(2), pp.271~279 (2006), American Concrete Institute
- Thompson, M. K., "CCT Nodes Anchored by Headed Bars. Part 1 : Behavior of Nodes", Structural Journal, 102(6), pp.808~815 (2005), ACI