반복하중을 받는 외부 보-기둥 접합부에 정착된 57mm 확대머리철근의 정착성능평가
Evaluation on Anchorage Performance of 57mm Headed Bars in Exterior Beam-Column Joint under Cyclic loading
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
본 연구에서는 반복하중을 받는 외부 보-기둥 접합부에 정착된 57mm 확대머리철근의 정착성능을 평가하였다. 총 4개의 외부 보-기둥 접합부 실험체를 계획하였으며, 콘크리트 압축강도, 측면피복두께, 횡보강근비 및 파괴유형을 주요 실험 변수로 설정하여 정착성능평가를 수행하였다. 성능평가 결과, 접합부에 정착된 대구경 확대머리철근의 정착성능에 가장 큰 영향을 주는 요소는 측면피복두께 및 횡보강근으로 나타났으며, 외부 보-기둥 접합부에 정착된 57mm 대구경 확대머리철근은 반복하중하에서도 충분한 정착성능이 발현되는 것을 확인할 수 있었다.
Abstract
In this study, the anchoring performance of 57mm headed bars anchored at the external beam-column joint under cyclic loading was evaluated. A total of 6 external beam-column joint test specimens were planned, and anchorage performance was evaluated by setting concrete compressive strength, side covering thickness, lateral reinforcement ratio, and fracture type as major experimental variables. As result of cyclic loading test, it was found that the factors that had the greatest influence on the anchoring capacity of the large-diameter headed bar anchored at the joint were the side cover thickness and the transverse reinforcing bar. It was confirmed that the 57mm large-diameter headed bar anchored at the external beam-column joint showed sufficient anchoring capacity even under cyclic loading.
참고문헌 (8)
- "ACI 318-11, Building Code Requirements for Structural Concrete and Commentary", American Concrete Institute, ~ (2011)
- "ACI 352-02, Recommendations for Design of Beam-Column Connections in Monolithic Reinforced Concrete Structure", ACI, ~ (2002)
- Bashandy, T. R., "Application of Headed Bars in Concrete Members", PhD, pp.1996
- Chun, S. C., "Side-face blowout failure of large-diameter high-strength headed bars in beam-column joints", ACI Structural Journal, 114(1) (2017)
- DeVries, R. A., "Anchorage of Headed Reinforcement in Concrete", PhD, pp.1996
- Furche, J., "Lateral Blow-Out Failure of Headed Studs Near a Free Edge", ACI Internatinal, SP-130 (1991)
- Thompson, M. K., "The Anchorage Behavior of Headed Reinforcement in CCT Nodes and Lap Splices", PhD, pp.2002
- Wallace, J. W., "Use of Headed Reinforcement in Beam-Column Joints Subjected to Earthquake Loads", ACI Structural Journal, 95(5) (1998)