본문 바로가기
KERD
논문KCI 등재

SFRC 부재에 수직 배근된 고강도 확대머리철근의 정착강도

Anchorage Strength of High Strength Headed Bar Embedded Vertically on SFRC Members

0

조회

0

다운로드

2

인용

0

참고문헌

키워드

주제분류안전공학

초록

본 논문은 강섬유 보강 콘크리트 부재에 수직으로 기계적 정착된 고강도 확대머리철근의 정착성능을 평가하기 위하여 실시한 기초인발실험결과를 정리한 것이다. 주요 실험변수는 강섬유의 혼입률, 콘크리트 강도, 정착길이, 확대머리철근 항복강도 , 전단보강유무 등이다. 실험체의 좌우 순피복두께는 확대머리철근 직경의 두 배로 계획하였다. 확대머리철근을 중심으로 1.5 ,0.7가 되는 위치에 힌지 지점을 두고, 확대머리 철근을 직접 인발하였다. 인발실험결과, 실험변수에 따라 콘크리트 파괴 및 철근 인장파단이 나타났다. 강섬유를 보강한 실험체가 동일한 변수의 강섬유를 보강하지 않은 실험체에 비히여 콘크리트 압축강도는 2.7~5.4% 크게 나타난 반면 인발강도는 20.9~63.1% 크게 나타나 정착성능 향상에 큰 기여를 하는 것으로 평가되었다. 강섬유 보강 콘크리트에 대해 확대머리철근과 평행한 전단보강근의 배근은1.7~7.7% 인발강도를 증가시켰으나, 콘크리트 강도 증가를 고려할 때 정착성능 향상에 미치는 영향이 크지 않았다. 본 실험체 상세와 같이 강섬유보강 콘크리트 부재에 수직정착된 SD600의 확대머리철근 정착설계는 KCI2017, KCI2012의 정착길이 설계식을 그대로 사용할 수 있을 것으로 사료된다.

Abstract

The paper is a summary of the results of the basic pullout test which is conducted to evaluate the anchorage capacity of high strength headedbars that is mechanical anchored vertically on steel fiber reinforced concrete members. The main experimental parameters are volume fraction of steelfiber, concrete strength, anchorage length, yield strength of headed bars, and shear reinforcement bar. Both sides of covering depth of the specimenare planned to double the diameter of the headed bars. The hinged point is placed at the position of each 1.5and 0.7 around the headed bars,and the headed bars are drawn directly. As a result of pullout test experiment, concrete fracture and steel tensile rupture appear by experimentalparameters. The compressive strength of concrete is 2.7~5.4% higher than that of steel fiber with the same parameters, while the pullout strengthis 20.9~63.1% higher than that of steel fiber without the same parameters, which is evaluated to contribute greatly to the improvement of the anchoragecapacity. The reinforcements of shear reinforcements parallel to the headed bars increased 1.7~7.7% pullout strength for steel fiber reinforced concrete,but the effect on the improvement of the anchorage capacity was not significant considering the increase in concrete strength. As with the details ofthis experiment, it is believed that the design formula for the anchorage length of KCI2017and KCI2012 are suitable for the mechanical developmentdesign of SD600 head bar that is perpendicular to the steel fiber reinforced concrete members.

참고문헌 (20)

  1. "ACI Committee 352, Code requirements for nuclear safety related concrete structures, (ACI352-02)", ~ (2002)
  2. "ACI Committee 349, Code requirements for nuclear safety related concrete structures, (ACI349-07)", ~ (2007)
  3. Thompson, M.K., "CCT nodes anchored by headed bars-Part 2 : Capacity of nodes", ACI structural Journal, 103(1), pp.65~73 (2006)
  4. "ACI Committee 318, Code requirements for nuclear safety related concrete structures, (ACI318-08)", ~ (2008)
  5. 이용택, "겹침이음된 헤드 철근의 이음 내력에 관한 실험적 연구", 대한건축학회논문집 구조계, 24(3), pp.87~94 (2008), 대한건축학회
  6. KCI Committee, "Concrete Design Code and Commentary", Korea Concrete Institute, ~ (2012)
  7. "ACI Committee 318, Code requirements for nuclear safety related concrete structures, (ACI318-14)", ~ (2014)
  8. 김승훈, "인장력을 받는 확대머리 이형철근의 겹침이음에 관한 실험적 연구", 한국구조물진단유지관리공학회 논문집, 18(5), pp.59~67 (2014), 한국구조물진단유지관리공학회[DOI]
  9. Sung-Chul Chun, "Comparison of code provisions on transverse reinforcement of exterior beam-column joints", Journal of the Korea Concrete Institute, pp.267~268 (2015)
  10. 김승훈, "구속상세가 SD400 및 SD500 확대머리 이형철근의 겹침이음에 미치는 영향에 관한 실험적 연구", 한국구조물진단유지관리공학회 논문집, 19(1), pp.62~71 (2015), 한국구조물진단유지관리공학회
  11. 문정호, "고강도 확대머리 이형철근의 정착길이 효과에 관한 실험적 연구", 한국구조물진단유지관리공학회 논문집, 19(5), pp.75~82 (2015), 한국구조물진단유지관리공학회
  12. Sung-Chul Chun, "Anchorage strength of high-strength large-diameter headed bar in CCT nodes", Journal of the Korea Concrete Institute, 28(1), pp.753~754 (2016)
  13. Seung-Hum Kim, "Lap details using headed bar and hooked bars for flexural members with different depths", Journal of the Korea Institute for Structural Maintenance and Inspection, 19(1), pp.62~71 (2016)
  14. "KDS Center 14 20, Korea Design Standard", Korea Construction Standards Center, (KCSC), ~ (2016)
  15. 심혜정, "120, 180 MPa 강섬유 보강 초고성능 콘크리트에 정착된 확대머리철근의 정착강도", 콘크리트학회 논문집, 28(3), pp.365~373 (2016), 한국콘크리트학회[DOI]
  16. 김승훈, "An Experimental Study on the Evaluation of Shear Performance of PVA Fiber Reinforced RC Deep Beam with High Strength Headed Rebar", Architectural Research, 19(4), pp.109~115 (2017), 대한건축학회[DOI]
  17. "KS F 2405, Standard test method for conpressive strength of concrete", Korean agency for technology and standards, ~ (2017)
  18. 심혜정, "외부 보-기둥 접합부에 정착된 확대머리철근의 정착강도 재평가", 콘크리트학회 논문집, 30(2), pp.207~216 (2018), 한국콘크리트학회
  19. Seunghun Kim, "Development strength of headed reingorcing bars for steel fiber reinforced concrete by pullout test", Architevtural research, 20(4), pp.129~135 (2018)
  20. "KS B 0802, Method of tensile test for metallic materials", Korean agency for technology and standards, ~ (2018)

관련 논문AI추천

이 간행물의 다른 논문 (18건)