One-step Physical Method for Synthesis of Cu Nanofluid in Ethylene Glycol
0
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
The Cu nanofluid in ethylene glycol was prepared by electrical explosion of wire, a novel one-step method. The X-ray diffraction, field emission scanning electron microscope and transmission electron microscope were used to study the properties of Cu nanoparticles. The results showed that the nanoparticles were consisted of pure face-centered cubic structure and near spherical shape with average grain size of 65 nm. Ultraviolet-visible spectroscopy (UV-Vis) confirmed Cu nanoparticles with a single absorbance peak of Cu surface plasmon resonance band at 600 nm. The nanofluid was found to be stable due to high positive zeta potential value, +51 mV. The backscattering level of nanofluid in static stationary was decreased about 2% for 5 days. The thermal conductivity measurement showed that Cu-ethylene glycol nanofluid with low concentration of nanoparticles had higher thermal conductivity than based fluid. The enhancement of thermal conductivity of nanofluid at a volume fraction of 0.1% was approximately 5.2%.
Abstract
The Cu nanofluid in ethylene glycol was prepared by electrical explosion of wire, a novel one-step method. The X-ray diffraction, field emission scanning electron microscope and transmission electron microscope were used to study the properties of Cu nanoparticles. The results showed that the nanoparticles were consisted of pure face-centered cubic structure and near spherical shape with average grain size of 65 nm. Ultraviolet-visible spectroscopy (UV-Vis) confirmed Cu nanoparticles with a single absorbance peak of Cu surface plasmon resonance band at 600 nm. The nanofluid was found to be stable due to high positive zeta potential value, +51 mV. The backscattering level of nanofluid in static stationary was decreased about 2% for 5 days. The thermal conductivity measurement showed that Cu-ethylene glycol nanofluid with low concentration of nanoparticles had higher thermal conductivity than based fluid. The enhancement of thermal conductivity of nanofluid at a volume fraction of 0.1% was approximately 5.2%.
참고문헌 (17)
- S. U. S. Choi, "American Society of Mechanical Engineers", Developments and Applications of Non-Newtonian Flows FED, 231, pp.99~ (1995)
- 정현욱, "Analysis of the effect of flow-induced crystallization on the stability of low-speed spinning using the linear stability method", The Korea-Australia Rheology Journal, 17(2), pp.63~69 (2005), 한국유변학회
- J. A. Eastman, , Appl. Phys. Lett, 78, pp.718~ (2001)
- H. T. Zhu, , J. Colloid Interface Sci, 277, pp.100~ (2004)
- M. S. Liu, , Int. J. Heat Mass Transfer, 49, pp.3028~ (2006)
- Yu A. Kotov, , J. Nanopart. Res, 5, pp.539~ (2003)
- Y. S. Kwon, , Scripta Mater, 44, pp.2247~ (2001)
- K. Murai, , Jpn. J. Appl. Phys, 47, pp.3726~ (2008)
- C. Cho, , Appl. Phys. Lett, 91, pp.141501~ (2007)
- N. Arul Dhas, , Chem. Mater, 10, pp.1446~ (1998)
- D. Mott, , Langmuir, 23, pp.5740~ (2007)
- S. H. Wu, , J. colloid Interface Sci, 273, pp.165~ (2004)
- S. M. S. Murshed, , Nanotechnol, 8, pp.5966~ (2008)
- Sarit K, "Nanofluids: Science and Technology" (2007), John Wiley and Sons Inc
- Y. Hwang, , Powder Technol, 186, pp.145~ (2008)
- X. F. Li, , Thermochim. Acta, 469, pp.98~ (2008)
- Y. Li, , Powder Technol, 196, pp.89~ (2009)