전기선 폭발법을 이용하여 제조된 구리 나노유체의 특성평가
Synthesis and Characterization of Cu Nanofluid Prepared by Pulsed Wire Evaporation Method
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Ethylene glycol-based Cu nanofluids were prepared by pulsed wire evaporation (PWE) method. The structural properties of Cu nanoparticles were studied by X-ray diffraction (XRD) and high resolution transmission electron microscopy (HRTEM). The average diameter and Brunauer Emmett Teller (BET) surface area of Cu nanoparticles were about 100 nm and 7.46 m2/g, respectively. The thermal conductivity and viscosity of copper nanofluid were measured as functions of Cu concentration and temperature. As the volume fraction of Cu nanoparticles increased, both the enhanced ratios of thermal conductivity and viscosity of Cu nanofluids increased. As the temperature increased, the enhanced ratio of thermal conductivity increased, but that ratio of viscosity decreased.
Abstract
Ethylene glycol-based Cu nanofluids were prepared by pulsed wire evaporation (PWE) method. The structural properties of Cu nanoparticles were studied by X-ray diffraction (XRD) and high resolution transmission electron microscopy (HRTEM). The average diameter and Brunauer Emmett Teller (BET) surface area of Cu nanoparticles were about 100 nm and 7.46 m2/g, respectively. The thermal conductivity and viscosity of copper nanofluid were measured as functions of Cu concentration and temperature. As the volume fraction of Cu nanoparticles increased, both the enhanced ratios of thermal conductivity and viscosity of Cu nanofluids increased. As the temperature increased, the enhanced ratio of thermal conductivity increased, but that ratio of viscosity decreased.
참고문헌 (22)
- "second ed., Clarendon Press" (1881), Oxford,UK
- S. P. Jang, , App. Phys. Lett, 84, pp.4316~ (2004)
- P. Keblinski, , Materials Today, 8, pp.36~ (2005)
- S. K. Das, , Heat Transfer.Eng, 3, pp.27~ (2006)
- S. K. Das, , J. Heat Transfer, 125, pp.567~ (2003)
- D. Wen, , J. Ther. Heat Trans, 18, pp.481~ (2004)
- R. Prasher, , Phys. Rev.Lett, 94, pp.025901~ (2005)
- 김종엽, "Viscosity and thermal conductivity of copper oxide nanofluid dispersed in ethylene glycol", The Korea-Australia Rheology Journal, 17(2), pp.35~40 (2005), 한국유변학회
- C. Zhang, , Exp. Ther. Flu. Sci, 31, pp.593~ (2007)
- S. Lee, , J. Heat Trans, 121, pp.280~ (1999)
- Y. Xuan, , Int. J. Heat Fluid Flow, 21, pp.58~ (2000)
- H. Masuda, , Netsu Bussei, 4, pp.227~ (1993)
- H. Xie, , Inter. J. Ther, 23, pp.571~ (2002)
- A. Eastman, , App. Phy. Lett, 78, pp.718~ (2001)
- 백일현, "탄소 나노튜브를 함유한 나노유체의 열전도도 증가", Korean Chemical Engineering Research(HWAHAK KONGHAK), 42(5), pp.624~629 (2004), 한국화학공학회
- N. Putra, , Heat and Mass Trans, 39, pp.775~ (2003)
- Chang Kyu Rhee, "Fabrication of Al Nano Powders by Pulsed Wire Evaporation (PWE) Method", Journal of Industrial and Engineering Chemistry, 9(1), pp.71~75 (2003), 한국공업화학회
- 김창규, "액상", 기상중 전기선 폭발법을 이용한 은 나노유체의 제조 및 특성평가에 관한 연구, 2009, pp.19(9), 468~472[DOI]
- 이희민, "전기선폭발법에 의해 카본 코팅된 Cu 나노분말의 제조 및 특성 연구", 한국분말야금학회지, 16(4), pp.243~248 (2009), 한국분말야금학회
- R. L. Hamilton, , I & EC Fundamentals, 1, pp.187~ (1962)
- S. K. Das, , J. Heat Transfer, 125, pp.567~ (2003)
- S. P. Jang, , Transaction of the ASME, 129, pp.617~ (2007)