고에너지 밀링 및 합성반응에 의한 Fe-TiC 복합분말 제조
Fabrication of Fe-TiC Composite Powder by High-Energy Milling and Subsequent Reaction Synthesis
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Fe-TiC composite powder was fabricated via two steps. The first step was a high-energy milling of FeO and carbon powders followed by heat treatment for reduction to obtain a (Fe+C) powder mixture. The optimal condition for high-energy milling was 500 rpm for 1h, which had been determined by a series of preliminary experiment. Reduction heat-treatment was carried out at 900oC for 1h in flowing argon gas atmosphere. Reduced powder mixture was investigated by X-ray Diffraction (XRD), Field Emission-Scanning Electron Microscopy (FE-SEM) and Laser Particle Size Analyser (LPSA). The second step was a high-energy milling of (Fe+C) powder mixture and additional TiH2 powder,and subsequent in-situ synthesis of TiC particulate in Fe matrix through a reaction of carbon and Ti. High-energy milling was carried out at 500 rpm for 1 h. Heat treatment for reaction synthesis was carried out at 1000~1200oC for 1 h in flowing argon gas atmosphere. X-ray diffraction (XRD) results of the fabricated Fe-TiC composite powder showed that only TiC and Fe phases exist. Results from FE-SEM observation and Energy-Dispersive X-ray Spectroscopy (EDS) revealed that TiC phase exists uniformly dispersed in the Fe matrix in a form of particulate with a size of submicron.
Abstract
Fe-TiC composite powder was fabricated via two steps. The first step was a high-energy milling of FeO and carbon powders followed by heat treatment for reduction to obtain a (Fe+C) powder mixture. The optimal condition for high-energy milling was 500 rpm for 1h, which had been determined by a series of preliminary experiment. Reduction heat-treatment was carried out at 900oC for 1h in flowing argon gas atmosphere. Reduced powder mixture was investigated by X-ray Diffraction (XRD), Field Emission-Scanning Electron Microscopy (FE-SEM) and Laser Particle Size Analyser (LPSA). The second step was a high-energy milling of (Fe+C) powder mixture and additional TiH2 powder,and subsequent in-situ synthesis of TiC particulate in Fe matrix through a reaction of carbon and Ti. High-energy milling was carried out at 500 rpm for 1 h. Heat treatment for reaction synthesis was carried out at 1000~1200oC for 1 h in flowing argon gas atmosphere. X-ray diffraction (XRD) results of the fabricated Fe-TiC composite powder showed that only TiC and Fe phases exist. Results from FE-SEM observation and Energy-Dispersive X-ray Spectroscopy (EDS) revealed that TiC phase exists uniformly dispersed in the Fe matrix in a form of particulate with a size of submicron.
참고문헌 (8)
- J. H. Kim., , Kor. J. Ceramics, 34, pp.473~482 (1997)
- S. H. Kang, , Bull. K. Cer. Soc, 10, pp.14~23 (1995)
- C. G. Goetzel., , U. S. Patent 2752666, ~ (1956)
- H. Suzuki., , Japan Society of Powder and Powder Metallurgy, 23(7), pp.224~229 (1976)
- B. K Lograsso., , Program of Powder Metallurgy, 43, pp.415~439 (1987)
- P. Ettmayer., , Int. J. Refractory and Hard Materials, 13, pp.343~ (1987)
- K. Edamund, "A series of monographs" (1987), academic press
- In-Shup Ahn, "Synthesis of Titanium Carbide by Thermo-Chemical Methods with TiH2 and Carbon Black Powders", Metals and Materials International, 12(3), pp.249~253 (2006), 대한금속·재료학회