조합 합성 시스템의 미세유체반응기를 이용한 CdSe 양자점 합성 및 분석
Synthesis and analysis CdSe Quantum dot with a Microfluidic Reactor Using a Combinatorial Synthesis System
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
A microfluidic reactor with computer-controlled programmable isocratic pumps and online detectors is employed as a combinatorial synthesis system to synthesize and analyze materials for fabricating CdSe quantum dots for various applications. Four reaction condition parameters, namely, the reaction temperature, reaction time, Cd/Se compositional ratio, and precursor concentration, are combined in synthesis condition sets, and the size of the synthesized CdSe quantum dots is determined for each condition. The average time corresponding to each reaction condition for obtaining the ultraviolet–visible absorbance and photoluminescence spectra is approximately 10 min. Using the data from the combinatorial synthesis system, the effects of the reaction conditions on the synthesized CdSe quantum dots are determined. Further, the data is used to determine the relationships between the reaction conditions and the CdSe particle size. This method should aid in determining and selecting the optimal conditions for synthesizing nanoparticles for diverse applications.
Abstract
A microfluidic reactor with computer-controlled programmable isocratic pumps and online detectors is employed as a combinatorial synthesis system to synthesize and analyze materials for fabricating CdSe quantum dots for various applications. Four reaction condition parameters, namely, the reaction temperature, reaction time, Cd/Se compositional ratio, and precursor concentration, are combined in synthesis condition sets, and the size of the synthesized CdSe quantum dots is determined for each condition. The average time corresponding to each reaction condition for obtaining the ultraviolet–visible absorbance and photoluminescence spectra is approximately 10 min. Using the data from the combinatorial synthesis system, the effects of the reaction conditions on the synthesized CdSe quantum dots are determined. Further, the data is used to determine the relationships between the reaction conditions and the CdSe particle size. This method should aid in determining and selecting the optimal conditions for synthesizing nanoparticles for diverse applications.
참고문헌 (24)
- K. Kim, , Appl. Phys. Lett., 101, pp.073107~ (2012)
- P. Roussignol, , Phys. Rev. Lett., 62, pp.312~ (1989)
- A.W. Lam, , Comput. Mater. Sci., 49, pp.S54~ (2010)
- D. J. Norris, , Phys. Rev. Lett., 72, pp.2612~ (1994)
- L. Qian, , Nat. Photonics, 5, pp.543~ (2011)
- X. Yang, , Adv. Mater., 24, pp.4180~ (2012)
- K. Kim, , Adv. Mater., 23, pp.911~ (2011)
- H. V. Demir, , Nano Today, 6, pp.632~ (2011)
- E. Jang, , Adv. Mater., 22, pp.3076~ (2010)
- A. J. Nozik, , Chem. Rev., 110, pp.6443~ (2010)
- A. Kongkanand, , J. Am. Chem. Soc., 130, pp.4007~ (2008)
- A. V. Malko, , Nano Lett., 11, pp.5213~ (2011)
- V. I. Klimov, , Science, 290, pp.314~ (2000)
- E. R. Smith, , Nano Lett., 11, pp.4923~ (2011)
- P. M. Allen, , J. Am. Chem. Soc., 132, pp.470~ (2009)
- L. M. Maestro, , Nano Lett., 10, pp.5109~ (2010)
- F. Pinaud, , J. Am. Chem. Soc., 126, pp.6115~ (2004)
- A. K. Gooding, , ACS Nano, 2, pp.669~ (2008)
- W. K. Bae, , Chem. Mater., 20, pp.531~ (2008)
- B. J. Beberwyck, , J. Am. Chem. Soc., 134, pp.19977~ (2012)
- C. G. Lee, , Építöanyag, 3-4, pp.52~ (2011)
- A. M. Nightingale, , J. Mater. Chem., 20, pp.8454~ (2010)
- H. Nakamura, , Lab Chip, 4, pp.237~ (2004)
- W. W. Yu, , Chem. Mater., 15, pp.2854~ (2003)