핵분열 기체 포획 기능을 갖는 사고저항성 UO2 펠렛에서 형성되는 입계상의 미세구조 관찰
Microstructure Observation of the Grain Boundary Phases in ATF UO2 Pellet with Fission Gas Capture-ability
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
One of the promising candidates for accident-tolerant fuel (ATF), a ceramic microcell fuel, which can be distinguished by an unusual cell-like microstructure (UO2 grain cell surrounded by a doped oxide cell wall), is being developed. This study deals with the microstructural observation of the constituent phases and the wetting behaviors of the cell wall materials in three kinds of ceramic microcell UO2 pellets: Si-Ti-O (STO), Si-Cr-O (SCO), and Al-Si-Ti-O (ASTO). The chemical and physical states of the cell wall materials are estimated by HSC Chemistry and confirmed by experiment to be mixtures of Si-O and Ti-O for the STO; Si-O and Cr-O for SCO; and Si-O, Ti-O, and Al-Si-O for the ASTO. From their morphology at triple junctions, UO2 grains appear to be wet by the Si-O or Al-Si-O rather than other oxides, providing a benefit on the capture-ability of the ceramic microcell cell wall. The wetting behavior can be explained by the relationships between the interface energy and the contact angle.
Abstract
One of the promising candidates for accident-tolerant fuel (ATF), a ceramic microcell fuel, which can be distinguished by an unusual cell-like microstructure (UO2 grain cell surrounded by a doped oxide cell wall), is being developed. This study deals with the microstructural observation of the constituent phases and the wetting behaviors of the cell wall materials in three kinds of ceramic microcell UO2 pellets: Si-Ti-O (STO), Si-Cr-O (SCO), and Al-Si-Ti-O (ASTO). The chemical and physical states of the cell wall materials are estimated by HSC Chemistry and confirmed by experiment to be mixtures of Si-O and Ti-O for the STO; Si-O and Cr-O for SCO; and Si-O, Ti-O, and Al-Si-O for the ASTO. From their morphology at triple junctions, UO2 grains appear to be wet by the Si-O or Al-Si-O rather than other oxides, providing a benefit on the capture-ability of the ceramic microcell cell wall. The wetting behavior can be explained by the relationships between the interface energy and the contact angle.
참고문헌 (17)
- Y. H. Koo, , Nucl. Technol, 186, pp.295~ (2014)
- C. P. Deck, , J. Nucl. Mater, 466, pp.667~ (2015)
- X. Wu, , Ann. Nucl. Energy, 85, pp.763~ (2015)
- J. H. Park, , Surf. Coat. Technol, 280, pp.256~ (2015)
- D. J. Kim, , J. Nucl. Mater, 462, pp.289~ (2015)
- K. D. Johnson, , J. Nucl. Mater, 477, pp.18~ (2016)
- 전상채, "사고저항성 핵연료용 세라믹 미소셀 UO2 소결체의 Cs 포집반응에 대한 열역학적 평가", Journal of Nuclear Fuel Cycle and Waste Technology, 17(1), pp.37~46 (2019), 한국방사성폐기물학회[DOI]
- H. G. Kim, , J. Nucl. Mater, 465, pp.531~ (2015)
- Y. I. Jung, , Mater. Des, 116, pp.325~ (2017)
- 김동주, "Development status of microcell UO3 pellet for accident-tolerant fuel", Nuclear Engineering and Technology, 50(2), pp.253~258 (2018), 한국원자력학회
- S. C. Jeon, , Ceram. Int, 45, pp.15754~ (2019)
- L. N. Grossman, , Rev. Int. Hautes Temper. Refract, 16, pp.255~ (1979)
- J. Matsunaga, , 2009 International LWR Fuel Performance Meeting (Top Fuel 2009) (2009)
- J. Matsunaga, , 2010 International LWR Fuel Performance Meeting (Top Fuel 2010) (2010)
- Outokumpu HSC Chemistry 9 for Windows, "A. Roine", Outokumpu Research Oy, ~ (2002)
- "R. M. Leckie", ~, pp.Tech. Rep., LA-UR-13-22252 (2013)
- C. Riglet-Martial, , J. Nucl. Mater, 447, pp.63~ (2014)