분말 표면 조도의 3차원 레이저 분석기를 이용한 정량화와 압분성형체 강도에 미치는 영향 분석
Quantitative Analysis of Roughness of Powder Surface Using Three-Dimensional Laser Profiler and its Effect on Green Strength of Powder Compacts
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Green strength is an important property of powders since high green strength guarantees easy and safe handling before sintering. The green strength of a powder compact is related to mainly mechanical and surface characters, governed by interlocking of the particles. In this study, the effect of powder surface roughness on the green strength of iron powders was investigated using a transverse rupture test. Three-dimensional laser profiler was employed for quantitative analyses of the surface roughness. Two different surface conditions, i.e. surface roughness, of powders were compared. The powders having rough surfaces show higher green strength than the round surface powders since higher roughness leads increasing interlocked area between the contacting powders.
Abstract
Green strength is an important property of powders since high green strength guarantees easy and safe handling before sintering. The green strength of a powder compact is related to mainly mechanical and surface characters, governed by interlocking of the particles. In this study, the effect of powder surface roughness on the green strength of iron powders was investigated using a transverse rupture test. Three-dimensional laser profiler was employed for quantitative analyses of the surface roughness. Two different surface conditions, i.e. surface roughness, of powders were compared. The powders having rough surfaces show higher green strength than the round surface powders since higher roughness leads increasing interlocked area between the contacting powders.
참고문헌 (11)
- R. M. German, "Powder Metallurgy of iron and Steel", pp.20~ (1998), John Wiley & Sons, Inc
- A. Salak, "Ferrous powder metallurgy", pp.354~ (1996), CISP
- 이동준, "수분사법으로 제조된 순철분말의 성형성에 미치는 분말크기의 영향", 한국분말야금학회지, 18(3), pp.221~225 (2011), 한국분말야금학회
- D. Poquillon, , Powder Tech, 126, pp.65~ (2002)
- D. Poquillon, , Powder Tech, 126, pp.75~ (2002)
- I. Nikolakakis, , Powder Tech, 56, pp.95~ (1988)
- J. S. Hirschhorn, , Powder Tech, 5, pp.72~ (1971)
- E. Y. Vyal’, , Powder Metall. Met. Ceram, 44, pp.615~ (2005)
- L. P. Lefebvre, , Powder Metall, 42, pp.325~ (1999)
- A. F. Zhornyak, , Powder Metall. Met. Ceram, 17, pp.558~ (1977)
- R. M. German, "Powder Metallurgy of iron and Steel", pp.50~ (1998), John Wiley & Sons, Inc