초 고온·고압 소결 공정으로 제조된 다결정 다이아몬드 컴팩트의 열충격 특성에 미치는 다이아몬드 입자 크기의 영향
Effect of Diamond Particle Size on the Thermal Shock Property of High Pressure High Temperature Sintered Polycrystalline Diamond Compact
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This study investigates the thermal shock property of a polycrystalline diamond compact (PDC) produced by a high-pressure, high-temperature (HPHT) sintering process. Three kinds of PDCs are manufactured by the HPHT sintering process using different particle sizes of the initial diamond powders: 8-16 μm (D50 = 4.3 μm), 10-20 μm (D50 = 6.92 μm), and 12-22 μm (D50 = 8.94 μm). The microstructure observation results for the manufactured PDCs reveal that elemental Co and W are present along the interface of the diamond particles. The fractions of Co and WC in the PDC increase as the initial particle size decreases. The manufactured PDCs are subjected to thermal shock tests at two temperatures of 780oC and 830oC. The results reveal that the PDC with a smaller particle size of diamond easily produces microscale thermal cracks. This is mainly because of the abundant presence of Co and WC phases along the diamond interface and the easy formation of Co-based (CoO, Co3O4) and W-based (WO2) oxides in the PDC using smaller diamond particles. The microstructural factors for controlling the thermal shock property of PDC material are also discussed.
Abstract
This study investigates the thermal shock property of a polycrystalline diamond compact (PDC) produced by a high-pressure, high-temperature (HPHT) sintering process. Three kinds of PDCs are manufactured by the HPHT sintering process using different particle sizes of the initial diamond powders: 8-16 μm (D50 = 4.3 μm), 10-20 μm (D50 = 6.92 μm), and 12-22 μm (D50 = 8.94 μm). The microstructure observation results for the manufactured PDCs reveal that elemental Co and W are present along the interface of the diamond particles. The fractions of Co and WC in the PDC increase as the initial particle size decreases. The manufactured PDCs are subjected to thermal shock tests at two temperatures of 780oC and 830oC. The results reveal that the PDC with a smaller particle size of diamond easily produces microscale thermal cracks. This is mainly because of the abundant presence of Co and WC phases along the diamond interface and the easy formation of Co-based (CoO, Co3O4) and W-based (WO2) oxides in the PDC using smaller diamond particles. The microstructural factors for controlling the thermal shock property of PDC material are also discussed.
참고문헌 (19)
- H. D. Stromberg, , Am. Ceram. Soc. Bull., 49, pp.1030~ (1990)
- H. Katman, , Science, 172, pp.1132~ (1971)
- J. Hu, , Surt. Coat. Technol., 202, pp.1113~ (2007)
- F. Bellin, , World Oil, 231, pp.41~ (2010)
- D. Belnap, , Dia. Rel. Mater., 13, pp.1914~ (2004)
- D. E. Scott, , Ind. Diamond Rev., 1, pp.48~ (2006)
- D. Miess, , Mater. Sci. Eng. A, 209, pp.270~ (1996)
- D. Jianxin, , Int. J. Refract. Met. Hard Mater., 29, pp.631~ (2011)
- M. V. Sneddon, , J. Petrol. Technol., 40, pp.1593~ (1988)
- 정임두, "Simulation and Experiment of Injection Molding Process for Superalloy Feedstock", 한국분말야금학회지, 22(1), pp.1~5 (2015), 한국분말야금학회
- J. W. Kim, "to be submitted", ~
- C. J. Kerr, , J. Pet. Technol., 40, pp.327~ (1988)
- R. L. Mehan, , J. Mater. Sci., 24, pp.942~ (1989)
- D. A. Glowka, , Master
- X. Q. You, , Ceram. Inter., 31, pp.33~ (2005)
- D. Che, , J. Manuf. Sci. Eng., 134, pp.1~ (2012)
- S. N. Basu, , Mater. Sci. Eng. A, 209, pp.206~ (1996)
- J. X. Deng, , Wear, 265, pp.1776~ (2008)
- C. A. Ribeiro, , J. Therm. Anal. Cal., 90, pp.801~ (2007)