나노 MgO–CaO–Al2O3–SiO2 glass 첨가제를 가진 AlN의소결거동 및 열전도도
Sintering Behavior and Thermal Conductivity of Aluminum Nitride Ceramics with MgO–CaO–Al2O3–SiO2 Nano-glass Additive
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this study, MgO–CaO–Al2O3–SiO2 (MCAS) nanocomposite glass powder having a mean particle size of 50 nm and a specific surface area of 40 m2/g is used as a sintering additive for AlN ceramics. Densification behaviors and thermal properties of AlN with 5 wt% MCAS nano-glass additive are investigated. Dilatometric analysis and isothermal sintering of AlN-5wt% MCAS compact demonstrates that the shrinkage of the AlN specimen increases significantly above 1,300oC via liquid phase sintering of MCAS additive, and complete densification could be achieved after sintering at 1,600oC, which is a reduction in sintering temperature by 200oC compared to conventional AlN-Y2O3 systems. The MCAS glass phase is satisfactorily distributed between AlN particles after sintering at 1,600oC, existing as an amorphous secondary phase. The AlN specimen attained a thermal conductivity of 82.6 W/m·K at 1,600oC.
Abstract
In this study, MgO–CaO–Al2O3–SiO2 (MCAS) nanocomposite glass powder having a mean particle size of 50 nm and a specific surface area of 40 m2/g is used as a sintering additive for AlN ceramics. Densification behaviors and thermal properties of AlN with 5 wt% MCAS nano-glass additive are investigated. Dilatometric analysis and isothermal sintering of AlN-5wt% MCAS compact demonstrates that the shrinkage of the AlN specimen increases significantly above 1,300oC via liquid phase sintering of MCAS additive, and complete densification could be achieved after sintering at 1,600oC, which is a reduction in sintering temperature by 200oC compared to conventional AlN-Y2O3 systems. The MCAS glass phase is satisfactorily distributed between AlN particles after sintering at 1,600oC, existing as an amorphous secondary phase. The AlN specimen attained a thermal conductivity of 82.6 W/m·K at 1,600oC.
참고문헌 (29)
- Y. Baik, , Eng. Mater., 122-124, pp.553~ (1996)
- R. E. Simons, , Solid State Technol., 26, pp.131~ (1983)
- C. Zweben, , JOM, 50, pp.47~ (1998)
- Y. Kurokawa, , IEEE Trans. Comp., Hybrids, Manuf. Technol., 8, pp.247~ (1985)
- T. B. Jackson, , J. Am. Ceram. Soc., 80, pp.1421~ (1997)
- A. V. Virkar, , J. Am. Ceram. Soc., 72, pp.2031~ (1989)
- G. A. Slack, , J. Phys. Chem. Solids, 34, pp.321~ (1973)
- L. M. Sheppard, , Am. Ceram. Soc. Bull., 69, pp.1801~ (1990)
- K. Komeya, , J. Am. Ceram. Soc., 54, pp.411~ (1974)
- K. Komeya, , J. Mater. Sci. Lett., 1, pp.325~ (1982)
- N. Kuramoto, , Am. Ceram. Soc. Bull., 68, pp.883~ (1989)
- A. L. Molisani, , J. Eur. Ceram. Soc., 26, pp.3431~ (2006)
- T. B. Troczynski, , J. Am. Ceram. Soc., 72, pp.1488~ (1989)
- E. Treicher, , J. Eur. Ceram. Soc., 6, pp.23~ (1990)
- J. Jarrige, , J. Eur. Ceram. Soc, 12, pp.279~ (1993)
- K. Watari, , J. Mater. Res., 14, pp.1409~ (1999)
- Y. Liu, , J. Mater. Sci. Lett., 18, pp.703~ (1999)
- L. Qiao, , J. Eur. Ceram. Soc., 23, pp.61~ (2003)
- C. M. Cheng, , J. Eur. Ceram. Soc, 20, pp.1061~ (2000)
- Q. Zhang, , Mater. Sci. Eng., A, 352, pp.217~ (2003)
- C. F. Yang, , Key Eng. Mater., 336-338, pp.1868~ (2007)
- H. J. Lee, , Int. J. Refract. Met. Hard Mater, 53, pp.46~ (2015)
- H. M. Lee, , Adv. Eng. Mater., 16, pp.65~ (2014)
- J. Y. Qiu, , J. Am. Ceram. Soc., 89, pp.377~ (2006)
- 이화준, "Synthesis of MgO-CaO-Al2O3-SiO2 Nanocomposite Powder by Polymeric Complex Method as a Novel Sintering Additive of AlN Ceramics", Electronic Materials Letters, 12(6), pp.732~737 (2016), 대한금속·재료학회[DOI]
- B. M. Abel, , J. Non-Cryst. Solids, 363, pp.39~ (2013)
- A. L. Molisani, , J. Mater. Sci. Mater. Elec., 20, pp.1~ (2009)
- A. V. Virkar, , J. Am. Ceram. Soc., 72, pp.2031~ (1989)
- S. Jang, , Ceram. Int., 38S, pp.S543~ (2012)