준안정상 기반의 질화철계 영구자석소재 제조연구동향
Research trend in Fabrication of Metastable-phase Iron Nitrides for Hard Magnetic Applications
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Rare earth magnets are the strongest type of permanent magnets and are integral to the high tech industry, particularly in clean energies, such as electric vehicle motors and wind turbine generators. However, the cost of rare earth materials and the imbalance in supply and demand still remain big problems to solve for permanent magnet related industries. Thus, a magnet with abundant elements and moderate magnetic performance is required to replace rare-earth magnets. Recently, a”-Fe16N2 has attracted considerable attention as a promising candidate for next-generation non-rare-earth permanent magnets due to its gigantic magnetization (3.23 T). Also, metastable a”-Fe16N2 exhibits high tetragonality (c/a = 1.1) by interstitial introduction of N atoms, leading to a high magnetocrystalline anisotropy constant (K1 = 1.0MJ/m3). In addition, Fe has a large amount of reserves on the Earth compared to other magnetic materials, leading to low cost of raw materials and manufacturing for industrial production. In this paper, we review the synthetic methods of metastable a”-Fe16N2 with film, powder and bulk form and discuss the approaches to enhance magnetocrystalline anisotropy of a”-Fe16N2. Future research prospects are also offered with patent trends observed thus far.
Abstract
Rare earth magnets are the strongest type of permanent magnets and are integral to the high tech industry, particularly in clean energies, such as electric vehicle motors and wind turbine generators. However, the cost of rare earth materials and the imbalance in supply and demand still remain big problems to solve for permanent magnet related industries. Thus, a magnet with abundant elements and moderate magnetic performance is required to replace rare-earth magnets. Recently, a”-Fe16N2 has attracted considerable attention as a promising candidate for next-generation non-rare-earth permanent magnets due to its gigantic magnetization (3.23 T). Also, metastable a”-Fe16N2 exhibits high tetragonality (c/a = 1.1) by interstitial introduction of N atoms, leading to a high magnetocrystalline anisotropy constant (K1 = 1.0MJ/m3). In addition, Fe has a large amount of reserves on the Earth compared to other magnetic materials, leading to low cost of raw materials and manufacturing for industrial production. In this paper, we review the synthetic methods of metastable a”-Fe16N2 with film, powder and bulk form and discuss the approaches to enhance magnetocrystalline anisotropy of a”-Fe16N2. Future research prospects are also offered with patent trends observed thus far.
참고문헌 (54)
- O. Gutfleisch, , Adv. Mater, 23, pp.821~ (2011)
- S. Sugimoto, , J. Phys. D: Appl. Phys., 44, pp.064001~ (2011)
- D. Brown, , J. Magn. Magn. Mater, 248, pp.432~ (2002)
- Rare earth elements: The global supply chain, "Humphries M.", Congressional Research Service, Library of Congress, ~, pp.CRS Report for Congress, R41347 (2010)
- A. Mubarok, , Meteoritics Planet Sci., 76 (2013)
- W. Zhang, , Phys. Status Solidi B, 252, pp.1934~ (2015)
- W. Xie, , J. Alloys Compd, 680, pp.1~ (2016)
- J. Cui, , Acta Mater, 158, pp.118~ (2018)
- M. Takahashi, , J. Appl. Phys, 76, pp.6642~ (1994)
- M. Takahashi, , J. Magn. Magn. Mat, 208, pp.145~ (2000)
- M. Widenmeyer, , Z. Anorg. Allg. Chem, 639, pp.2851~ (2013)
- J. A. Osborn, , Phys. Rev, 67, pp.351~ (1945)
- D. J. Sellmyer, , J. Phys.: Condens. Matter, 13, pp.R433~ (2001)
- K. Jack, , Proc. Roy. Soc. London, A208, pp.216~ (1951)
- M. Usikov, , Fiz. Met. Metalloved, 30, pp.614~ (1970)
- T. Kim, , Appl. Phys. Lett, 20, pp.492~ (1972)
- M. Komuro, , J. Appl. Phys, 67, pp.5126~ (1990)
- Y. Sugita, , J. Appl. Phys, 70, pp.5977~ (1991)
- J. M. D. Coey, , J. Phys.: Condens. Matter, 6, pp.L23~ (1994)
- J. M. D. Coey, , J. Appl. Phys, 76, pp.6632~ (1994)
- T. Weber, , Thin Solid Films, 279, pp.216~ (1996)
- T. Hattori, , J. Magn. Soc. Jpn, 25, pp.927~ (2001)
- Y. Sasaki, , IEEE Trans. Magn, 41, pp.3241~ (2005)
- E. Kita, , J. Magn. Magn. Mater, 310, pp.2411~ (2007)
- C. W. Kartikowati, , Nanoscale, 8, pp.2648~ (2016)
- I. Dirba, , Acta Materialia, 123, pp.214~ (2017)
- 김수경, "High Purity α”-Fe16N2 Particles with Tunable Sphere Structures via Spray Drying Method", Journal of Magnetics, 22(4), pp.590~595 (2017), 한국자기학회
- Y. Jiang, , Phys. Rev. Appl, 6, pp.024013~ (2016)
- T. Ogawa, , Appl. Phys. Express, 6, pp.073007~ (2013)
- T. Ogi, , J. Appl. Phys, 113, pp.164301~ (2013)
- R. Zulhijah, , Adv. Powder. Technol, 25, pp.582~ (2014)
- R. Zulhijah, , Nanoscale, 6, pp.6487~ (2014)
- R. Zulhijah, , J. Magn. Magn. Mater, 381, pp.89~ (2015)
- T. Ogi, , Adv. Powder. Technol, 27, pp.2520~ (2016)
- R. Zulhijah, , Langmuir, 31, pp.6011~ (2015)
- I. Dirba, , Acta Mater, 123, pp.214~ (2017)
- A. J. Newell, , J. Geophys. Res.: Solid Earth, 104, pp.617~ (1999)
- H. Xu, , AIP Advances, 8, pp.056422~ (2018)
- 백연경, "분무건조된 Nd-Fe-B 전구체 입자의 크기조절 및 환원-확산후 자기 특성에 미치는 영향", 한국분말재료학회지, 20(5), pp.359~365 (2013), 한국분말재료학회
- Y. Jiang, , Adv. Eng. Mater, 18, pp.1009~ (2016)
- Y. Jiang, , Phys. Rev. Appl, 6, pp.024013~ (2016)
- Y. Jiang, , Sci. Rep, 6, pp.25436~ (2016)
- 김경민, "체심정방정 구조 Fe-Co계 합금상의 합성 및 그 자기적 특성", 한국자기학회지, 27(4), pp.129~134 (2017), 한국자기학회
- A. Iga, , Jpn. J. Appl. Phys, 9, pp.415~ (1970)
- W. Coene, , J. Magn. Magn. Mater, 96, pp.189~ (1991)
- M. D. Kuzmin, , J. Phys.: Condens. Matter, 26, pp.064205~ (2014)
- A. tröm M. Werwiński, , Phys. Rev. B, 92, pp.174413~ (2015)
- K. M. Kim, , IEEE Trans. Magn, 54, pp.2101805~ (2018)
- X. Zhao, , Phys. Rev. B, 94, pp.224424~ (2016)
- M. Tobise, , AIP Advances, 9, pp.035233~ (2019)
- D. L. Leslie-Pelecky, , Chem. Mater, 8, pp.1770~ (1996)
- T. Holstein, , Phys. Rev, 58, pp.1098~ (1940)
- M. Pardavi-Horvath, , IEEE Trans. Magn, 37, pp.3881~ (2001)
- M. Kobayashi, , IEEE Trans. Magn, 28, pp.1810~ (1992)