L-PBF 공정으로 제조된 Nd-Fe-B계 영구자석의 기판 가열에 따른 미세조직과 자기적 특성 변화
Effect of Substrate Pre-heating on Microstructure and Magnetic Properties of Nd-Fe-B Permanent Magnet Manufactured by L-PBF
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Because magnets fabricated using Nd-Fe-B exhibit excellent magnetic properties, this novel material is used in various high-tech industries. However, because of the brittleness and low formability of Nd-Fe-B magnets, the design freedom of shapes for improving the performance is limited based on conventional tooling and postprocessing. Laserpowder bed fusion (L-PBF), the most famous additive manufacturing (AM) technique, has recently emerged as a novel process for producing geometrically complex shapes of Nd-Fe-B parts owing to its high precision and good spatial resolution. However, because of the repeated thermal shock applied to the materials during L-PBF, it is difficult to fabricate a dense Nd-Fe-B magnet. In this study, a high-density (>96%) Nd-Fe-B magnet is successfully fabricated by minimizing the thermal residual stress caused by substrate heating during L-PBF.
Abstract
Because magnets fabricated using Nd-Fe-B exhibit excellent magnetic properties, this novel material is used in various high-tech industries. However, because of the brittleness and low formability of Nd-Fe-B magnets, the design freedom of shapes for improving the performance is limited based on conventional tooling and postprocessing. Laserpowder bed fusion (L-PBF), the most famous additive manufacturing (AM) technique, has recently emerged as a novel process for producing geometrically complex shapes of Nd-Fe-B parts owing to its high precision and good spatial resolution. However, because of the repeated thermal shock applied to the materials during L-PBF, it is difficult to fabricate a dense Nd-Fe-B magnet. In this study, a high-density (>96%) Nd-Fe-B magnet is successfully fabricated by minimizing the thermal residual stress caused by substrate heating during L-PBF.
참고문헌 (42)
- M. Sagawa, , Jpn. J. Appl. Phys, 26, pp.785~ (1987)
- K. Hono, , Scr. Mater, 67, pp.530~ (2012)
- K. Hono, , Scr. Mater, 151, pp.6~ (2018)
- O. Gutfleisch, , Adv. Mater, 23, pp.821~ (2011)
- Y. Matsuura, , J. Magn. Magn. Mater, 303, pp.344~ (2006)
- D. Brown, , J. Magn. Magn. Mater, 248, pp.432~ (2002)
- T. S. Chin, , J. Appl. Phys, 64, pp.5531~ (1988)
- G. Y. Kim, , Scr. Mater, 214, pp.114676~ (2022)
- T. H. Kim, , Scr. Mater, 178, pp.433~ (2020)
- H. R. Cha, , IEEE Trans. Magn, 58, pp.1~ (2022)
- Y. Yang, , J. Sustain. Metall, 3, pp.122~ (2017)
- M. Yue, , IEEE Trans. Magn, 39, pp.3551~ (2003)
- (1997), Mechanical Industry Press
- Y. M. Rabinovich, , Intermetallics, 4, pp.641~ (1996)
- T. D. Ngo, , Composites Part B, 143, pp.172~ (2018)
- L. E. Murr, , J. Mater. Sci. Technol, 28, pp.1~ (2012)
- D. D. Gu, , Int. Mater. Rev, 57, pp.133~ (2012)
- 강민철, "금속 적층제조기술의 국내외 개발동향과 기술적 이슈", 대한용접접합학회지, 34(4), pp.9~16 (2016), 대한용접접합학회[DOI]
- 최중호, "적층 가공된 3차원 조형체의 치밀화에 미치는 단일 melt pool 형상의 영향", 한국분말재료학회지, 24(3), pp.187~194 (2017), 한국분말재료학회[DOI]
- 박정민, "선택적 레이저 용융법으로 제조한 316L 스테인리스강의 기계적이방성에 미치는 기공의 영향", 한국분말재료학회지, 25(6), pp.475~481 (2018), 한국분말재료학회[DOI]
- E. A. Perigo, , Addit. Manuf, 30, pp.100870~ (2019)
- J. F. Liu, , J. Appl. Phys, 97, pp.10~ (2005)[DOI]
- F. Bittner, , Prog. Addit. Manuf, 5, pp.3~ (2020)
- P. Stief, , Procedia CIRP, 70, pp.47~ (2018)
- J. Wu, , Mater. Des, 209, pp.109992~ (2021)
- "ASTM B212-17, Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel", ASTM International, ~ (2021)
- "ASTM B527-15, Standard Test Method for Tap Density of Metal Powders and Compounds", ASTM International, ~ (2020)
- P. Mercelis, , Rapid Prototyp. J, 12, pp.254~ (2006)
- F. Bittner, , Scr. Mater, 201, pp.113921~ (2021)
- E. Ghio, , Materials, 15, pp.2047~ (2022)
- G. M. Karthik, "Heterogeneous Aspects of Additive Manufactured Metallic Parts: A Review", Metals and Materials International, 27(1), pp.1~39 (2021), 대한금속·재료학회[DOI]
- J. P. Kruth, , J. Mater. Process. Technol, 149, pp.616~ (2004)
- R. Mertens, , Procedia CIRP, 74, pp.5~ (2018)
- K. Kempen, , J. Manuf. Sci. Eng, 136, pp.061026~ (2014)
- J. Sander, , Mater. Des, 89, pp.335~ (2016)
- B. Vrancken, "Preheating of Selective Laser Melted Ti6Al4V: Microstructure and Mechanical Properties", Proceedings of the 13th World Conference on Titanium, pp.1269~ (2016)
- F. Huber, , Mater. Sci. Eng. A, 742, pp.109~ (2019)
- C. Rong, , Chin. Phys. B, 27, pp.117502~ (2018)
- R. Ahuja, , J. Magn. Magn, Mater, 140, pp.89~ (1995)
- Q. Zhou, , J. Rare Earths, 36, pp.379~ (2018)
- Y. Zhang, , Acta Mater, 146, pp.97~ (2018)
- D. W. Shin, , J. Magn. Magn. Mater, 482, pp.280~ (2019)