분말 합성법(Sol-Gel & Solid-State reaction)에 따른 Lithium Lanthanum Titanate 분말의 입자 및 결정 크기 비교 분석에 관한 연구
A Study on Particle and Crystal Size Analysis of Lithium Lanthanum Titanate Powder Depending on Synthesis Methods (Sol-Gel & Solid-State reaction)
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Lithium (Li) is a key resource driving the rapid growth of the electric vehicle industry globally, with demand and prices continually on the rise. To address the limited reserves of major lithium sources such as rock and brine, research is underway on seawater Li extraction using electrodialysis and Li-ion selective membranes. Lithium lanthanum titanate (LLTO), an oxide solid electrolyte for all-solid-state batteries, is a promising Li-ion selective membrane. An important factor in enhancing its performance is employing the powder synthesis process. In this study, the LLTO powder is prepared using two synthesis methods: sol-gel reaction (SGR) and solid-state reaction (SSR). Additionally, the powder size and uniformity are compared, which are indices related to membrane performance. X-ray diffraction and scanning electron microscopy are employed for determining characterization, with crystallite size analysis through the full width at half maximum parameter for the powders prepared using the two synthetic methods. The findings reveal that the powder SGR-synthesized powder exhibits smaller and more uniform characteristics (0.68 times smaller crystal size) than its SSR counterpart. This discovery lays the groundwork for optimizing the powder manufacturing process of LLTO membranes, making them more suitable for various applications, including manufacturing high-performance membranes or mass production of membranes.
Abstract
Lithium (Li) is a key resource driving the rapid growth of the electric vehicle industry globally, with demand and prices continually on the rise. To address the limited reserves of major lithium sources such as rock and brine, research is underway on seawater Li extraction using electrodialysis and Li-ion selective membranes. Lithium lanthanum titanate (LLTO), an oxide solid electrolyte for all-solid-state batteries, is a promising Li-ion selective membrane. An important factor in enhancing its performance is employing the powder synthesis process. In this study, the LLTO powder is prepared using two synthesis methods: sol-gel reaction (SGR) and solid-state reaction (SSR). Additionally, the powder size and uniformity are compared, which are indices related to membrane performance. X-ray diffraction and scanning electron microscopy are employed for determining characterization, with crystallite size analysis through the full width at half maximum parameter for the powders prepared using the two synthetic methods. The findings reveal that the powder SGR-synthesized powder exhibits smaller and more uniform characteristics (0.68 times smaller crystal size) than its SSR counterpart. This discovery lays the groundwork for optimizing the powder manufacturing process of LLTO membranes, making them more suitable for various applications, including manufacturing high-performance membranes or mass production of membranes.
참고문헌 (33)
- P. K. Choubey, , Miner. Eng, 89, pp.119~ (2016)
- Y. M. Lin, , Chem. Commun, 48, pp.7268~ (2012)
- Y. Huang, , Solid State Ion, 345, pp.115171~ (2020)
- K. Sasaki, , Fusion Eng. Des, 170, pp.112500~ (2021)
- S. Yang, , Joule, 2, pp.1648~ (2018)
- A. Siekierka, , Desalination, 436, pp.8~ (2018)
- J. F. Song, , Water Res. Technol, 3, pp.593~ (2017)
- P. K. Choubey, , Miner. Eng, 110, pp.104~ (2017)
- C. Liu, , Joule, 4, pp.1459~ (2020)
- Z. Li, , Energy Environ. Sci, 14, pp.3152~ (2021)
- Y. Heng, , J. Electroceram, 47, pp.23~ (2021)
- 김주미, "리튬이차전지용 고체 전해질의 최근 진전과 전망", 전기화학회지, 22(3), pp.87~103 (2019), 한국전기화학회[DOI]
- H. Kawai, , J. Electrochem. Soc, 141, pp.L78~ (1994)
- X. Gao, , J. Mater. Chem. A, 2, pp.843~ (2014)
- Y. Inaguma, , Solid State Commun, 86, pp.689~ (1993)
- L. Xu, , Nano Energy, 92, pp.106758~ (2022)
- P. Braun, , J. of Electroceram, 38, pp.157~ (2017)
- 김영일, "리튬이온의 선택적 투과를 위한 Lithium Lanthanum Titanate계 분리막 제조 공정 개발", 한국분말재료학회지, 30(1), pp.22~28 (2023), 한국분말재료학회
- Z. Jiang, , Adv. Mater, 32, pp.1906221~ (2020)
- S. Xia, , Chem, 5, pp.753~ (2019)
- Z. Zheng, , J. Electrochem. Soc, 161, pp.A473~ (2014)
- M. Vijayakumar, , Chem. Mater, 16, pp.2719~ (2004)
- A. Monshi, , WJNSE, 2, pp.154~ (2012)
- A. R. Symington, , J. Mater. Chem. A, 9, pp.6487~ (2021)
- T. Polczyk, , J. Mater. Sci, 56, pp.2435~ (2021)
- H. Y. Jeong, , Geochim. Cosmochim. Acta, 72, pp.493~ (2008)
- M. Baumung, , Sustainable Energy Fuels, 3, pp.2218~ (2019)
- H. T. Le, , Electrochim. Acta, 248, pp.232~ (2017)
- T. Luo, , Adv. Funct. Mater, 31, pp.2100258~ (2021)
- H. Geng, , Electrochi. Acta, 56, pp.3406~ (2011)
- R. Li, , J. Membr. Sci, 582, pp.194~ (2019)
- R. Inada, , Solid State Ionics, 261, pp.95~ (2014)
- C. W. Ban, , Solid State Ionics, 140, pp.285~ (2001)