합성 방법에 따른 Li1.3Al0.3Ti1.7(PO4)3 소결체의 미세 구조 및 이온전도 특성 연구
A Study on the Microstructures and Ionic Conductivity of Li1.3Al0.3Ti1.7(PO4)3 with Different Synthesis Routes
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Li1.3Al0.3Ti1.7(PO4)3(LATP) is considered a promising material for all-solid-state lithium batteries owing to its high moisture stability, wide potential window (~6 V), and relatively high ion conductivity (10-3–10-4 S/cm). Solid electrolytes based on LATP are manufactured via sintering, using LATP powder as the starting material. The properties of the starting materials depend on the synthesis conditions, which affect the microstructure and ionic conductivity of the solid electrolytes. In this study, we synthesize the LATP powder using sol-gel and co-precipitation methods and characterize the physical properties of powder, such as size, shape, and crystallinity. In addition, we have prepared a disc-shaped LATP solid electrolyte using LATP powder as the starting material. In addition, X-ray diffraction, scanning electron microscopy, and electrochemical impedance spectroscopic measurements are conducted to analyze the grain size, microstructures, and ion conduction properties. These results indicate that the synthesis conditions of the powder are a crucial factor in creating microstructures and affecting the conduction properties of lithium ions in solid electrolytes.
Abstract
Li1.3Al0.3Ti1.7(PO4)3(LATP) is considered a promising material for all-solid-state lithium batteries owing to its high moisture stability, wide potential window (~6 V), and relatively high ion conductivity (10-3–10-4 S/cm). Solid electrolytes based on LATP are manufactured via sintering, using LATP powder as the starting material. The properties of the starting materials depend on the synthesis conditions, which affect the microstructure and ionic conductivity of the solid electrolytes. In this study, we synthesize the LATP powder using sol-gel and co-precipitation methods and characterize the physical properties of powder, such as size, shape, and crystallinity. In addition, we have prepared a disc-shaped LATP solid electrolyte using LATP powder as the starting material. In addition, X-ray diffraction, scanning electron microscopy, and electrochemical impedance spectroscopic measurements are conducted to analyze the grain size, microstructures, and ion conduction properties. These results indicate that the synthesis conditions of the powder are a crucial factor in creating microstructures and affecting the conduction properties of lithium ions in solid electrolytes.
참고문헌 (26)
- J. -M. Tarascon, , Nature, 414, pp.359~ (2001)
- Z. Ding, , Electrochim. Acta, 196, pp.622~ (2016)
- D. Zhou, , Chem, 5, pp.2326~ (2019)
- Q. Zhao, , Nat. Rev. Mater, 5, pp.229~ (2020)
- R. Mercier, , Solid State Ionics, 5, pp.663~ (1981)
- N. Kamaya, , Nat. Mater, 10, pp.682~ (2011)
- T. A. Yersak, , Front. Energy Res, 10, pp.882508~ (2022)
- B. Kang, , Ceramist, 21, pp.349~ (2018)
- Y. Inaguma, , Solid State Commun, 86, pp.689~ (1993)
- R. Murugan, , Angew. Chem. Int. Ed, 46, pp.7781~ (2007)
- D. Safanama, , Solid State Ionics, 262, pp.211~ (2014)
- 3 electrolytes by a sol-gel method, "Journal of Ceramic Processing Research", 2013, 563~566, pp.청정에너지연구소, 10.36410[DOI]
- S. Wang, , ACS Energy Lett, 1, pp.1080~ (2016)
- B. Lang, , Chem. Mater, 27, pp.5040~ (2015)
- K. Arbi, , Chem. Mater, 14, pp.1091~ (2002)
- L. Huang, , J. Power Sources, 196, pp.6943~ (2011)
- Q. Ma, , J. Am. Ceram. Soc, 99, pp.410~ (2016)
- Z. Yao, , J. Mater. Sci.: Mater. Elecron, 32, pp.24834~ (2021)
- M. Kotobuki, , Solid State Ionics, 19, pp.1945~ (2013)
- A. G. Mailer, , J. Phys. Condens. Matter, 27, pp.145102~ (2015)
- 변윤기, "공치법으로 제조된 yttria Doped Ceria 분체의 건조방법에 따른 입자특성 고찰", 한국세라믹학회지, 40(8), pp.15~15 (2003), 한국세라믹학회
- S. Duluard, , J. Eur. Ceram. Soc, 33, pp.1145~ (2013)
- P. Scherrer, , Nachr. Ges. Wiss. Göttingen, 26, pp.98~ (1918)
- J. I. Langford, , J. Appl. Cryst, 11, pp.102~ (1978)
- A. J. Bard, "ELECTROCHEMICAL METHODS Fundamentals and Application" (2001), John Wiley & Sons
- J. T. S. Irvine, , Adv. Mater, 2, pp.132~ (1990)