리튬이온의 선택적 투과를 위한 Lithium Lanthanum Titanate계 분리막 제조 공정 개발
Development of Lithium Lanthanum Titanate (LLTO) Membrane Manufacturing Process for Selective Separation of Lithium Ion
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The global demand for raw lithium materials is rapidly increasing, accompanied by the demand for lithiumion batteries for next-generation mobility. The batch-type method, which selectively separates and concentrates lithium from seawater rich in reserves, could be an alternative to mining, which is limited owing to low extraction rates. Therefore, research on selectively separating and concentrating lithium using an electrodialysis technique, which is reported to have a recovery rate 100 times faster than the conventional methods, is actively being conducted. In this study, a lithium ion selective membrane is prepared using lithium lanthanum titanate, an oxide-based solid electrolyte material, to extract lithium from seawater, and a large-area membrane manufacturing process is conducted to extract a large amount of lithium per unit time. Through the developed manufacturing process, a large-area membrane with a diameter of approximately 20 mm and relative density of 96% or more is manufactured. The lithium extraction behavior from seawater is predicted by measuring the ionic conductivity of the membrane through electrochemical analysis.
Abstract
The global demand for raw lithium materials is rapidly increasing, accompanied by the demand for lithiumion batteries for next-generation mobility. The batch-type method, which selectively separates and concentrates lithium from seawater rich in reserves, could be an alternative to mining, which is limited owing to low extraction rates. Therefore, research on selectively separating and concentrating lithium using an electrodialysis technique, which is reported to have a recovery rate 100 times faster than the conventional methods, is actively being conducted. In this study, a lithium ion selective membrane is prepared using lithium lanthanum titanate, an oxide-based solid electrolyte material, to extract lithium from seawater, and a large-area membrane manufacturing process is conducted to extract a large amount of lithium per unit time. Through the developed manufacturing process, a large-area membrane with a diameter of approximately 20 mm and relative density of 96% or more is manufactured. The lithium extraction behavior from seawater is predicted by measuring the ionic conductivity of the membrane through electrochemical analysis.
참고문헌 (56)
- W. A. Hart, "The Chemistry of Lithium Sodium Potassium Cesium and Francium", pp.1~ (1973), Pergmum Press
- P. K. Choubey, , Miner. Eng, 89, pp.119~ (2016)
- J. W. Choi, , Nat. Rev. Mater, 1, pp.16013~ (2016)
- Y. M. Lin, , Chem. Commun, 48, pp.7268~ (2012)
- X. Liang, , Nat. Energy, 2, pp.17119~ (2017)
- Y. Huang, , Solid State Ion, 345, pp.115171~ (2020)
- K. Sasaki, , Fusion Eng. Des, 170, pp.112500~ (2021)
- Mineral Commodity Summaries, Minerals Yearbook, "U. S. Geological Survey", ~ (2010)
- P. K. Choubey, , Miner. Eng, 110, pp.104~ (2017)
- Mineral Commodity Summaries, "U. S. Geological Survey", ~ (2017)
- K. Yoshizuka, , Ars. Separatoria. Acta, 4, pp.78~ (2006)
- A. Siekierka, , Desalination, 436, pp.8~ (2018)
- J. F. Song, , Water Res. Technol, 3, pp.593~ (2017)
- P. K. Choubey, , Miner. Eng, 110, pp.104~ (2017)
- C. Liu, , Joule, 4, pp.1459~ (2020)
- H. J. Hong, , Chem. Eng. J, 337, pp.455~ (2018)
- S. Yang, , Joule, 2, pp.1648~ (2018)
- B. S. Oh, , Desalin. Water Treat, 18, pp.245~ (2012)
- T. Hoshino, , Desalination, 359, pp.59~ (2015)
- T. Hoshino, , Desalination, 317, pp.11~ (2013)
- T. Hoshino, , Fusion Eng. Des, 88, pp.2956~ (2013)
- T. Xu, , J. Power Sources, 481, pp.229110~ (2021)
- K. Hayamizu, , Solid State Ion, 326, pp.37~ (2018)
- J. E. O. Bohnkea, , Solid State Ion, 109, pp.25~ (1992)
- W. Arnold, , J. Power Sources, 464, pp.228158~ (2020)
- Z. Gao, , Adv. Mater, 30, pp.1705702~ (2018)
- R. Chen, , Chem. Rev, 120, pp.6820~ (2020)
- A. Banerjee, , Chem. Rev, 120, pp.6878~ (2020)
- R. Chen, , Joule, 4, pp.812~ (2020)
- H. Chung, , Chem. Mater, 29, pp.8611~ (2017)
- W. Xia, , J. Am. Ceram. Soc, 100, pp.2832~ (2017)
- Y. Inaguma, , Solid State Commun, 86, pp.689~ (1993)
- C. H. Chen, , Solid State Ion, 144, pp.51~ (2001)
- A. I. Ruiz, , Solid State Ion, 112, pp.291~ (1998)
- K. Hayamizu, , Solid State Ion, 326, pp.37~ (2018)
- Z. Yao, , J. Electron. Mater, 51, pp.736~ (2022)
- Z. Ji, , Sep. Purif. Technol, 172, pp.168~ (2017)
- Z. Li, , Energy Environ. Sci, 14, pp.3152~ (2021)
- Y. Sun, , Crit. Rev. Solid State Mater. Sci, 44, pp.265~ (2019)
- H. Kawai, , J. Electrochem. Soc, 141, pp.L78~ (1994)
- C. Cooper, , Adv. Eng. Mater, 16, pp.755~ (2014)
- National Center for Biotechnology Information, "Pub-Chem Element Summary for AtomicNumber 3, Lithium", ~ (2021)
- L. Xu, , Nano Energy, 92, pp.106758~ (2022)
- Y. Q. Cheng, , J. Mater. Chem, 2, pp.2418~ (2014)
- K. Ohara, , Phys. Status Solidi C, 6, pp.1004~ (2009)
- Y. Harada, , Solid State Ion, 108, pp.407~ (1998)
- T. Teranishi, , Solid State Ion, 243, pp.18~ (2013)
- H. T. Chung, , Solid State Ion, 107, pp.153~ (1998)
- T. Okumura, , J. Mater. Chem, 21, pp.10061~ (2011)
- C. Bernuy-Lopez, , Chem. Mater, 26, pp.3610~ (2014)
- Y. Li, , J. Mater. Chem, 22, pp.15357~ (2012)
- C. Deviannapoorani, , J. Power Sources, 240, pp.18~ (2013)
- C. Cao, , Front. Energy Res, 2, pp.25~ (2014)
- W. H. Baur, , Solid State ion, 18, pp.935~ (1986)
- A. Hayashi, , Front. Energy Res, 4, pp.25~ (2016)
- L. Zhou, , Chem. Mater, 31, pp.7801~ (2019)