복합조직을 응용한 도비디자인에 관한 연구
A Study on Dobby Design that Applies a Complex Weave Design
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Fabric refers to a fabric in which warp (vertical thread) and weft (horizontal thread) cross at the right angles. Here, the warp is more twisted than the weft. The number of twists increases, the stronger it becomes. The fabric is glued on a warp, and is subjected to great tension in the shuttle loom machine. A lot of friction in the shuttle loom’s traffic is applied so that protective work is performed to strengthen it. The weft is thicker and less twisted than the warp. Therefore, its side is weaker than the warp’s side, but its elasticity is high. The width of the fabric is determined according to the loom machine. Hence, if it is large, the fabric can be produced broadly, and if it is small, the fabric can be produced narrowly. In general, it can be divided into small, medium, and large. The textile organization, which is the main pillar of the textile composition, started with the beginning of the industrial revolution and has been around for 400 years. However, compared to that long time, the reality of textile technology was that the basic weaves of the fabric have existed about 600 times. In this study, the number of textile weaves designs that will be induced and created into Dobby weave using complex weave is mathematically infinite. The size and diversity of designs are also increased to infinite areas. The applied dobby design, which is the result of this study, is primarily used as an organization that constitutes a fabric, and secondly, as a pattern for various industries. This is a revolutionary result of the history of textile weaving, and I am sure that it will be a pattern design necessary for all industries.
Abstract
Fabric refers to a fabric in which warp (vertical thread) and weft (horizontal thread) cross at the right angles. Here, the warp is more twisted than the weft. The number of twists increases, the stronger it becomes. The fabric is glued on a warp, and is subjected to great tension in the shuttle loom machine. A lot of friction in the shuttle loom’s traffic is applied so that protective work is performed to strengthen it. The weft is thicker and less twisted than the warp. Therefore, its side is weaker than the warp’s side, but its elasticity is high. The width of the fabric is determined according to the loom machine. Hence, if it is large, the fabric can be produced broadly, and if it is small, the fabric can be produced narrowly. In general, it can be divided into small, medium, and large. The textile organization, which is the main pillar of the textile composition, started with the beginning of the industrial revolution and has been around for 400 years. However, compared to that long time, the reality of textile technology was that the basic weaves of the fabric have existed about 600 times. In this study, the number of textile weaves designs that will be induced and created into Dobby weave using complex weave is mathematically infinite. The size and diversity of designs are also increased to infinite areas. The applied dobby design, which is the result of this study, is primarily used as an organization that constitutes a fabric, and secondly, as a pattern for various industries. This is a revolutionary result of the history of textile weaving, and I am sure that it will be a pattern design necessary for all industries.
참고문헌 (7)
- 육영수, "제직공학", pp.1~65 (1994), 한국산업인력관리공단
- 류문호, "새로운 직물조직", pp.3~70 (2018), 도서출판 노바
- 이변헌, "제직", pp.90~149 (1986), 한국산업인력관리공단
- 엄재영, "방적이론", pp.1~53 (1997), 한국산업인력관리공단
- 정경연, "텍스타일 프린팅 디자인", pp.1~33 (2020), 도서출판 청람
- 의상디자인연구회, "직물염색가공과 디자인", pp.1~85 (1992), 학문사
- 이광열, "Art Nouveau 양식을 활용한 수출용 주얼리 디자인 개발에 관한 연구", 산업기술연구논문지, 25(4), pp.65~71 (2020), 한국산업기술융합학회[DOI]