CAW(Computer-Aided Weaving) 시스템을 이용한 도비 직조디자인 연구
A study on Dobby Weave Design using Computer-Aided Weaving System
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The purpose of this study was to research about Dobby weave design using Computer-Aided Weaving System. For performing this design study, first, it was researched the characteristics of the classified woven fabrics, weaving processing, structure of Dobby loom, and Computer-Aided Dobby Weaving system theoretically. To develop Dobby woven design, Patternland Weave Simulator(U.S.A) for computer weave system was used. Among the developed Dobby woven designs by computer weaving system, mainly three of them were selected and woven into Dobby loom. To see the visual image of the fabric end-use, some of the scanned Dobby fabrics were simulated to the three-dimensional virtual images by Alias CAD system. The result of this study can be summarized as follows. Before the step of weaving Dobby fabrics on the woven design works, Computer-Aided Weaving system can be done very easily to apply the design step of Dobby woven fabrics, specially in case of the complicated woven structure. Also the usage of the simulation CAD system in visual image of the final products, ultimately can be saved cost and developed the higher value-added goods in more response to consumer demands.
Abstract
The purpose of this study was to research about Dobby weave design using Computer-Aided Weaving System. For performing this design study, first, it was researched the characteristics of the classified woven fabrics, weaving processing, structure of Dobby loom, and Computer-Aided Dobby Weaving system theoretically. To develop Dobby woven design, Patternland Weave Simulator(U.S.A) for computer weave system was used. Among the developed Dobby woven designs by computer weaving system, mainly three of them were selected and woven into Dobby loom. To see the visual image of the fabric end-use, some of the scanned Dobby fabrics were simulated to the three-dimensional virtual images by Alias CAD system. The result of this study can be summarized as follows. Before the step of weaving Dobby fabrics on the woven design works, Computer-Aided Weaving system can be done very easily to apply the design step of Dobby woven fabrics, specially in case of the complicated woven structure. Also the usage of the simulation CAD system in visual image of the final products, ultimately can be saved cost and developed the higher value-added goods in more response to consumer demands.
참고문헌 (18)
- 공석붕, "패션소재론", pp.231~240 (2007), 경춘사
- 김성련, "새의류소재", pp.39~40 (2005), 교문사
- 동아출판사백과사전부, "동아원색세계대백과사전", pp.408~409 (1985), 동아출판사
- 모경옥, "컴퓨터 위빙", pp.12~140 (1996), 미진사
- 신재희, "Computer Dobby 직기를 이용한 연구", 석사, pp.1996
- 안영무, "직물학", pp.74~77 (2004), 수학사
- 이명길, "纖維産業(織物中心)小考", 최고경영자과정 논문집, 12, pp.282~287 (1990)
- 이정주, "텍스타일 기획과 디자인", pp.207~209 (2000), 신광출판사
- 이애자, "다종광 컴퓨터 직기를 사용한 직물디자인 연구", 진주산업대논문집, 36, pp.139~152 (1997)
- 오희선, "텍스타일 디자인론", pp.223~228 (1996), 교학연구사
- 이혜자, "의류소재의 이론과 실제", pp.71~81 (2006), 형설출판사
- 정고은, "EAT 프로그램을 이용한 방적모시직물 디자인 개발", 감성과학회 춘계학술대회논문집, pp.223~226 (2009)
- 조길수, "의류소재학", pp.147~150 (2008), 동서문화원
- 진영길, "자카드직물의 용도와 문양 연구", 한국패션뷰티학회지, 4(2), pp.50~51 (2006)
- 최경미, "텍스타일 CAD를 활용한 도비 및 장식사직물의 디자인과 외관특성연구", 석사, pp.2008
- 최영자, "16종광 도비직기에서 네트워크조직의 디자인 발전에 관한 연구", 디자인학연구, 15(1), pp.81~92 (2001)
- 한상혜, "텍스타일 캐드를 이용한 직물디자인", 한국디자인학회지, 39(13), pp.213~223 (1998)
- 한화교, "직물구조학", pp.31~53 (2003), 형설출판사