간이 해석 기법을 이용한 FPSO 충돌 해석
FPSO Collision Analysis Using a Simplified Analytical Technique
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Collision between vessels may lead to structural damage and penetration of hulls. The structural damage of a hull may eventually bring about global collapse of the hull girder and outflow of oil, which would contaminate seawater. Therefore, various regulations require the strength of a vessel after collision to satisfy given criteria, and owners usually request collision analyses to confirm the structural safety of their vessels. In the process of designing a vessel to satisfy the collision strength criteria, the strength has been assessed mostly by conducting collision analyses using numerical techniques, such as dynamic, non-linear, finite-element analysis. Design is an inherently iterative process during which many changes are necessary due to the endless needs for reinforcement and modification. Numerical techniques are not adequate for coping with a situation in which collision analysis is frequently required to provide the revised results that reflect the repetitive changes in designs. Numerical techniques require a lot of time and money to conduct in spite of recent improvements in computing power and in the productivity of modeling tools. Therefore, in this paper, an analytical technique is introduced and a collision problem is idealized and simplified using reasonable assumptions based on appropriate background. The technique was applied to an example of an actual FPSO and verified by comparing the results with results from the numerical technique. A good correlation was apparent between the results of the analytical and numerical techniques.
Abstract
Collision between vessels may lead to structural damage and penetration of hulls. The structural damage of a hull may eventually bring about global collapse of the hull girder and outflow of oil, which would contaminate seawater. Therefore, various regulations require the strength of a vessel after collision to satisfy given criteria, and owners usually request collision analyses to confirm the structural safety of their vessels. In the process of designing a vessel to satisfy the collision strength criteria, the strength has been assessed mostly by conducting collision analyses using numerical techniques, such as dynamic, non-linear, finite-element analysis. Design is an inherently iterative process during which many changes are necessary due to the endless needs for reinforcement and modification. Numerical techniques are not adequate for coping with a situation in which collision analysis is frequently required to provide the revised results that reflect the repetitive changes in designs. Numerical techniques require a lot of time and money to conduct in spite of recent improvements in computing power and in the productivity of modeling tools. Therefore, in this paper, an analytical technique is introduced and a collision problem is idealized and simplified using reasonable assumptions based on appropriate background. The technique was applied to an example of an actual FPSO and verified by comparing the results with results from the numerical technique. A good correlation was apparent between the results of the analytical and numerical techniques.
참고문헌 (20)
- 이상갑, "주변 유체를 고려한 선박 충돌해석 기법 연구", 대한조선학회 논문집, 44(2), pp.166~173 (2007), 대한조선학회
- 이탁기, "작은 충돌손상을 가진 보강판의 최종강도 해석", 한국해양공학회지, 21(4), pp.34~37 (2007), 한국해양공학회
- Faulkner,D, "A Review of Effective Plating for Use in the Analysis of Stiffened Plating in Bending and Compression", J. Ship Research, 19(1), pp.27~34 (1975)
- Ito, H, "A Simplified Method to Analyze the Strength of Double Hulled Structure in Collision", J. Naval Arch. Japan, 156, pp.283~296 (1984)
- Ito, H, "A Simplified Method to Analyze the Strength of Double Hulled Structure in Collision (2nd Report)", J. Naval Arch. Japan, 158, pp.420~434 (1985)
- Ito, H, "A Simplified Method to Analyze the Strength of Double Hulled Structure in Collision (3rd Report)", J. Naval Arch. Japan, 160, pp.266~274 (1986)
- Jones,N, "Structural impact" (1989), Cambridge University Press
- Kinkead,A.N, "A Method for Analyzing Cargo Protection Afforded by Ship Structures in Collision and its Application to an LNG Carrier", Trans. RINA, 122, pp.1~22 (1980)
- Kuroiwa,T, "Numerical Simulation of Actual Collision & Grounding Accidents", Designs and Methodologies for Collision and Grounding Protection of Ships, pp.7.1~7.12 (1996)
- Lee, J.W, "A Comparative Study of the Double Hull Structures for the Collision Energy Absorption Systems", J. of Ship & Ocean Technology, 5(4), pp.19~28 (2001)
- McDermott, J.F, "Tanker Structural Analysis for Minor Collision", Trans. SNAME, 82, pp.382~412 (1974)
- Minorsky,V.U, "An Analysis of Ship Collisions with Reference to Protection of Nuclear Power Plant", J. of Ship Research, 3(1), pp.1~4 (1959)
- Pedersen,P.T, "Collision and Grounding Mechanics", WEGENT'95, pp.125~157 (1995)
- Petersen,M.J, "Dynamics of Ship Collisions", Ocean Engineering, 9(4), pp.295~329 (1982)
- Reardon, P.C, "Validation of Minorsky's Ship Collision Model and Use of the Model to Estimate the Probability of Damaging a Radioactive Material Transportation Cask During a Ship Collision", Int. Conference on Design and Methodologies for Collision and Grounding Protection of Ships (1996)
- Reckling,K.A, "On the Collision Protection of Ships", PRADS, pp.129~134 (1977)
- Reckling,K.A, "Mechanics of Minor Ship Collision", Int. J. Impact Engineering, 1(3), pp.281~299 (1983)
- Sano, A, "A Study on the Strength of Double Hull Side Structure of VLCC in Collision", MARIENV'95, pp.58~65 (1995)
- Shibue, T, "Experimental Study on the Strength of Collision Barriers in Nuclear Ships", J. Naval Arch. Japan, 151, pp.245~254 (1982)
- Suh, Y.S, "Ice Collision Analyses for Membrane Tank Type LNG Carrier", J. Ship & Ocean Technology, 12(1), pp.35~44 (2008)