Current Measurement and Velocity Spatial Distribution of Deep Ocean Engineering Basin
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
To ensure the international competitiveness of the domestic offshore plant industry, a consensus has been formed regarding the requirement for large offshore basins for performing offshore plant performance verification. Accordingly, the Korea Research Institute of Ships & Ocean Engineering has built the world's largest deep ocean engineering basin (DOEB). The purpose of this study is to evaluate the characteristics of velocity distribution under various conditions of the DOEB. An independent measuring jig is designed and manufactured to measure the current velocities of many locations within a short time. The measurement jig is a 15-m-high triangular-truss structure, and the measurement sensors can move 15 m vertically through an electric motor-wire device. The current speed is measured under various impeller revolutions per minute and locations of the DOEB using the jig. The spatial distribution characteristics of the current velocity in the DOEB and the performance of the current generator are analyzed. The maximum speed is 0.56 m/s in the center of the DOEB water surface, thereby confirming sufficient current velocity distribution uniformity for model testing.
Abstract
To ensure the international competitiveness of the domestic offshore plant industry, a consensus has been formed regarding the requirement for large offshore basins for performing offshore plant performance verification. Accordingly, the Korea Research Institute of Ships & Ocean Engineering has built the world's largest deep ocean engineering basin (DOEB). The purpose of this study is to evaluate the characteristics of velocity distribution under various conditions of the DOEB. An independent measuring jig is designed and manufactured to measure the current velocities of many locations within a short time. The measurement jig is a 15-m-high triangular-truss structure, and the measurement sensors can move 15 m vertically through an electric motor-wire device. The current speed is measured under various impeller revolutions per minute and locations of the DOEB using the jig. The spatial distribution characteristics of the current velocity in the DOEB and the performance of the current generator are analyzed. The maximum speed is 0.56 m/s in the center of the DOEB water surface, thereby confirming sufficient current velocity distribution uniformity for model testing.
참고문헌 (7)
- Buchner, B., "Features of the State-of-the-art Deepwater Offshore Basin", Offshore Technology Conference, pp.363~373 (1999)
- Buchner, B., "Important Environmental Modelling Aspects for Ultra Deep Water Model Tests", Proceedigs of Deep Offshore Technology Conference (DOT) (2001)
- Buchner, B., "Current Modeling Experience in an Offshore Basing", Proceedings of the ASME 27th International Conference on Offshore Mechanics and Arctic Engineering (OMAE2008), pp.417~424 (2008)
- Haro, M. P. E., "Numerical Simulations for Current Generation of Constant and Variable Velocity Profiles in Deepwater Ocean Engineering Basin of KRISO", Proceedings of the 13th (2018)ISOPE Pacific, 2018, 146~154[DOI]
- 오상호, "수위 조절 회류시스템을 갖춘 2차원 조파수조", 한국해안·해양공학회논문집, 30(6), pp.337~342 (2018), 한국해안,해양공학회[DOI]
- Park, I. R., "Numerical Investigation of Current Generation Performance in a Large Ocean Engineering Basin (Oral Presentation)", Proceedings of the Eleventh Pacific-Asia Offshore Mechanics Symposium PACOMS2014 (2014)
- Yang, C. K., "An Experimental Study on the Characteristics of Current in the Ocean Engineering Basin", Journal of the Society of Naval Architects of Korea, 37(4), pp.55~65 (2000)