1000A용 버터플라이 밸브 주요부품의 구조해석
Structural Analysis of 1000A Butterfly Valve Components
2
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
This paper deals with a stability evaluation of a butterfly valve using the body and disc of a valve seat. The experimental results of a strength evaluation are shown using STS316 stainless steel and spheroidal graphite cast iron (GCD450). The disc material was made from GCD450. The results of the strength analysis are as follows: Ultimate tensile strength 485MPa, Yield strength 370 MPa, Young's modulus 1.1×105, and Poisson's ratio v=0.28. For the results of the disc analysis, the safety factor was about 4. This shows that a design was derived that satisfied the requirements of structural safety. However, some problems, such as the deflection and deformation of the disc, may occur when the sea water has back flow with a high pressure.
Abstract
This paper deals with a stability evaluation of a butterfly valve using the body and disc of a valve seat. The experimental results of a strength evaluation are shown using STS316 stainless steel and spheroidal graphite cast iron (GCD450). The disc material was made from GCD450. The results of the strength analysis are as follows: Ultimate tensile strength 485MPa, Yield strength 370 MPa, Young's modulus 1.1×105, and Poisson's ratio v=0.28. For the results of the disc analysis, the safety factor was about 4. This shows that a design was derived that satisfied the requirements of structural safety. However, some problems, such as the deflection and deformation of the disc, may occur when the sea water has back flow with a high pressure.
참고문헌 (10)
- 김윤철, "버터플라이 밸브의 특성이해와 현장적용기술", 제어계측 기획특집, pp.42~47 (2002)
- 박영철, "특성함수를 이용한 Butterfly Valve의 최적설계", 한국해양공학회지, 19(3), pp.59~65 (2005), 한국해양공학회
- 박영철, "컴퓨터를 이용한 Valve의 구조설계, 기계산업기술강좌", 67~76 (2001)
- 이석순, "예제로 배우는 CATIA V5, 과학기술", ~ (2004)
- Kim, R.H., "3-D Analysis Butterfly Valve Fluid Flow", Proceedings of the FLUENT User's Group Meeting, pp.43~57 (1993)
- Kimura, T., "Hydrodynamic Characteristic of a Butterfly Valve-Prediction of Torque Characteristics", ISA Trans., 34, pp.319~326 (1995)
- 이종욱, "버터플라이 밸브 주위의 비압축성 및 압축성유동 특성에 대한 수치해석", 에너지공학, 11(1) (2002), 한국에너지공학회
- 이권희, "최적화기법 및 실험계획법을 이용한 자동차 도어의 경량화 설계", 한국자동차공학회 논문집, 10(1), pp.125~132 (2002), 한국자동차공학회
- Wehage, R.A., "Design Sensitivity Analysis of Planer Mechanism and Machine Dynamic", Transactions of the ASME, 103, pp.560~570 (1981)
- Yi, S.I., "Optimization of the Eccentric Check Butterfly Valve considering the Flow Characteristics and Structural Safety", IMechE, 222, pp.63~73 (2008), J. Process Mechanical Engineering