방수형 경량 로봇팔의 설계 연구
Design Study on Waterproof 4‐axis Manipulator
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This paper deals with the design method for a small waterproof 4‐axis robot arm. An extensive analysis was performed on the torque applied to the robot joint as a result of the payload, as well as the design of the joint actuator capacity. In addition, a study was undertaken on the design of a waterproof joint actuator that works at depths greater than 10 m and the wiring design for a small waterproof connector to avoid obstructing the robot motion. Finally, a finite element method simulation was carried out to analyze the strength of the designed robot arm link, and its stability was verified through a simulation test.
Abstract
This paper deals with the design method for a small waterproof 4‐axis robot arm. An extensive analysis was performed on the torque applied to the robot joint as a result of the payload, as well as the design of the joint actuator capacity. In addition, a study was undertaken on the design of a waterproof joint actuator that works at depths greater than 10 m and the wiring design for a small waterproof connector to avoid obstructing the robot motion. Finally, a finite element method simulation was carried out to analyze the strength of the designed robot arm link, and its stability was verified through a simulation test.
참고문헌 (12)
- Murphy, R. R., "Activities of the Rescue Robots at the World Trade Center from 11-21 September 2001", pp.50~61 (2004), IEEE Robotics and Automation Magazine
- Frost, T., "Derived Performance Metrics and Measurements Compared to Field Experience for the PackBot", Proceedings of the 2002 PerMIS Workshop, MD, USA (2002)
- White, J. R., "Hazardous-Duty Robots-Experiences and Needs", pp.1989, Proceedings of IEEE
- Michaud, F., "Co-Design of AZIMUT : A Multi-Modal Robotic Platform", Proceedings of ASME 2003 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Chicago, USA, pp.801~810 (2003)
- Srinivasa, S., "A Home Xploring Robotic Butler", Autonom. Robots, 28(1), pp.5~20 (2009)
- Nilsson, N., "A Mobile Automation : An Application of Artificial Intelligence Techniques", Proceedings of the 1st International Joint Conference on Artificial Intelligence, pp.509~520 (1969)
- Ambler, A. P., "A Versatile Computer-Controlled Assembly System", Proceedings of the 3rd International Joint Conference on Artificial Intelligence, pp.298~307 (1973)
- Lozano-Perez, T., "A Robot System that Recognizes, Plans, and Manipulates", Proceedings of IEEE Int. Conf. Robot, pp.843~849 (1987)
- Ben-Tzvi, P., "Design, Simulations and Optimization of a Tracked Mobile Robot Manipulator with Locomotion and Manipulation Capabilities", Proceedings of IEEE Int. Conf. on Rob. and Auto., pp.2307~2312 (2008)
- Kim, T. G., "Arm Design of a Surveillance Robot for Stable Camera View", Proceedings of the KSME 2010 Fall Annual Meeting, pp.1078~1080 (2010)
- Kim, S. S., "Design of a Manipulator for Surveillance Robot using CFRP", Proceeding of KSPE 2012 Spring Conference, pp.227~228 (2012)
- Na, D. Y., "Vision-based Docking Method for Modular Robots with 3 DOF Docking Arm", Proceedings of KIIS Fall Conference 2009, 19(2), pp.86~87 (2009)