심해저 원유 생산용 매니폴드 프레임 구조 기본 설계
Basic Design of Deep Subsea Manifold Frame Structure for Oil Production
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Amanifold is one of the essential subsea oil and gas production components to simplify the subsea production layout. It collects the production fluid from a couple of wellheads, transfers it to onshore or offshore storage platforms, and even accommodates water and gas injection flowlines. This paper presents the basic design procedure for a manifold frame structure with novel structural verification using in-house unity check codes. Loads and load cases for the design of an SIL 3 class-manifold are established from a survey of relevant industrial codes. The basic design of the manifold frame is developed based on simple load considerations such as the self weights of the manifold frame and pipeline system. In-house software with Eurocode 3 embedded, called INHA-SOLVER, makes it possible to carry out code checks on the yield and buckling unities. This paper finally proves that the new design of the manifold frame structure is effective to resist a permanent and environment load, and the in-house code is also adaptively combined with the commercial finite element code Nastran.
Abstract
Amanifold is one of the essential subsea oil and gas production components to simplify the subsea production layout. It collects the production fluid from a couple of wellheads, transfers it to onshore or offshore storage platforms, and even accommodates water and gas injection flowlines. This paper presents the basic design procedure for a manifold frame structure with novel structural verification using in-house unity check codes. Loads and load cases for the design of an SIL 3 class-manifold are established from a survey of relevant industrial codes. The basic design of the manifold frame is developed based on simple load considerations such as the self weights of the manifold frame and pipeline system. In-house software with Eurocode 3 embedded, called INHA-SOLVER, makes it possible to carry out code checks on the yield and buckling unities. This paper finally proves that the new design of the manifold frame structure is effective to resist a permanent and environment load, and the in-house code is also adaptively combined with the commercial finite element code Nastran.
참고문헌 (19)
- Altair, "HyperMesh User Manual", Altair, ~ (2013)
- Ansys, "Ansys User Manual", Ansys, ~ (2010)
- Recommend Practice 2A-WSD, "American Petroleum Institute", API, ~, pp.API RP 2A-WSD (2000)
- ANSI, "API Specification 17D", American Petroleum Institute(API), 2011
- ANSI, "API Recommend Practice", American Petroleum Institute(API), 2013, API RP 17P
- Structural Welding Code-Steel, "American Welding Society(AWS)", AWS, ~, pp.AWS D1.1 (2000)
- Bai, Y., "Subsea Structural Engineering Hand Book" (2010), Elsevier
- "A Suggestion To Strengthen The Offshore Industry On Busan City" (2014)[URL]
- Bentley, "SACS User Manual" (2014), Bentley
- Recommend Practice, "Det Norske Veritas(DNV)", DNV, ~, pp.DNV-RP-C205 (2010)
- Recommend Practice, "Det Norske Veritas(DNV)", DNV, ~, pp.DNV-RP-H103 (2011)
- Eurocode 3 Part 1.1-1.5, "European Committee for Standadization(CEN)", CEN, ~ (2001)
- Kirkbride, P., "Lightweight Subsea Manifold Design", Proceedings of 26th Offshore Technology Conference, pp.177~186 (1994)
- Lee, S. E., "An Efficient Design Methodology for Subsea Manifold Piping Systems Based on Parametric Studies", Ocean Engineering, 84, pp.273~282 (2014)
- "MatWeb" (2013)[URL]
- "MD Nastran R3 Users Manual. MSC, Ribeiro M., 2006. Subsea Hardware Development for Pendulous Installation in Ultra Deep Water in Workshop on the Pendulous Installation Method (PIM) for Deployment of Heavy Subsea Hardware in Ultra Deepwater" (2006)[URL]
- Robinson, R., "Design Challenges of a 48-inch Pipeline Subsea Manifold", Proceedings of 35th Offshore Technology Conf (2003)
- Wang, Y., "Modeling for the Optimization of Layout Scenarios of Cluster Manifolds with Pipeline End Manifolds", Applied Ocean Research, 46, pp.94~103 (2014)
- Wang, Y., "A Mathematical Model for Subsea Wells Partition in the Layout of Cluster Manifolds", Applied Ocean Research, 36, pp.26~35 (2012)