천해용 얇은 외압 실린더의 설계와 해석 과정
Process of Structural Design and Analysis of Thin Pressure Cylinder for Shallow Sea Usage
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
In this paper, an aluminum pressure vessel (cylinder) for a 200 m water depth is designed and analyzed. Because of their lack of usage in the deep sea, only a few papers about pressure vessels subjected to external pressures have previously been published. Moreover, the high level of imported external-pressure-vessel products limits the academic pursuit. Yet, research on internal pressure vessels is widely available because of their broad usage at onshore. This paper presents the process of basic designing and modelling of pressure vessels using the design rules of American Standard of Mechanical Engineering (ASME) Section VIII Division 1. To promote understanding, finite element analysis (FEA) result of an existing sample cylinder which was not designed by ASME code is compared with the design obtained in this paper. Several methodologies are used for the finite element analysis, including rectangular, cylindrical, and axisymmetric coordinate, to attain an accurate stress result. Same dimensions except the thickness of the cylinder and loading condition of 0.200 MPa was given for the current study. Finally, a rigorous design procedure is added for the bolt and boundary conditions of the cylindrical body and its ends. The obtained stress level satisfies the allowable design stress value specified in the ASME code.
Abstract
In this paper, an aluminum pressure vessel (cylinder) for a 200 m water depth is designed and analyzed. Because of their lack of usage in the deep sea, only a few papers about pressure vessels subjected to external pressures have previously been published. Moreover, the high level of imported external-pressure-vessel products limits the academic pursuit. Yet, research on internal pressure vessels is widely available because of their broad usage at onshore. This paper presents the process of basic designing and modelling of pressure vessels using the design rules of American Standard of Mechanical Engineering (ASME) Section VIII Division 1. To promote understanding, finite element analysis (FEA) result of an existing sample cylinder which was not designed by ASME code is compared with the design obtained in this paper. Several methodologies are used for the finite element analysis, including rectangular, cylindrical, and axisymmetric coordinate, to attain an accurate stress result. Same dimensions except the thickness of the cylinder and loading condition of 0.200 MPa was given for the current study. Finally, a rigorous design procedure is added for the bolt and boundary conditions of the cylindrical body and its ends. The obtained stress level satisfies the allowable design stress value specified in the ASME code.
참고문헌 (15)
- American Bureau of Shipping (ABS), "Rules for Building and Classing, Underwater Vehicles, Systems and Hyperbaric Facilities", ~ (2010)
- Consideration of External Pressure in the Design and Pressure Rating of Subsea Equipment, "American Petroleum Institute (API)", ~, pp.Technical Report 17TR12 (2014)
- American Society of Mechanical Engineers (ASME), "ASME Boiler and Pressure Vessel Code (ASME BPVC). Section VIII, Division 1; Rules for construction of pressure vessels", ~ (2010)
- 조상래, "수압을 받는 복합재 원통의 최종강도 실험 연구", 한국해양공학회지, 21(3), pp.52~57 (2007), 한국해양공학회
- de Paor, C, "Prediction of Vacuum-induced Buckling Pressures of Thin-walled Cylinders", Thin-Walled Structures, 55, pp.1~10 (2012)
- Japan Agency for Marine-Earth Science and Technology (JAMSTEC), "Design Criteria for 10, 000 m Class Deepsea Pressure Vesse. Report of Japan Agency for Marine-Earth Science and Technology", ~ (1991)
- 정태환, "A Study on the Structural Design and Analysis of a Deep-sea Unmanned Underwater Vehicle", 한국해양공학회지, 20(3), pp.7~14 (2006), 한국해양공학회
- 정태환, "심해용 무인잠수정의 내압용기 구조설계", 대한조선학회 논문집, 41(6), pp.140~146 (2004), 대한조선학회
- 정태환, "내압용기 모형의 설계, 제작 및 압력시험에 관한 연구", 한국해양공학회지, 21(6), pp.101~106 (2007), 한국해양공학회
- 정태환, "신뢰성 해석을 이용한 심해용 내압용기의 설계 최적화", 한국해양공학회지, 19(2), pp.40~46 (2005), 한국해양공학회
- Kim, S-E, "Buckling strength of the Cylindrical Shell and Tank Subjected to Axially Compressive Loads", Thin-Walled Structures, 40(4), pp.329~353 (2002)
- Little, A. P. F, "Inelastic Buckling of Geometrically Imperfect Tubes Under External Hydrostatic Pressure", The Journal of Ocean Technology, Rieview & Papers, pp.75~90 (2008)
- Prabu, B, "Finite Element Analysis of Buckling of Thin Cylindrical Shell Subjected to Uniform External Pressure", Journal of Solid Mechanics, 1(2), pp.148~158 (2009)
- Ross, C. T. F, "Buckling of Ring-stiffened Domes Under External Hydrostatic Pressure", Ocean Engineering, 31(2), pp.239~252 (2004)
- Shin, J-Y, "Collapse Analysis of Deep Sea Pressure Vessel", Journal of Ocean Engineering and Technology, 13(4), pp.82~97 (1999)