낙하체 충돌을 고려한 심해저 매니폴드 보호 구조물 설계
Design of Subsea Manifold Protective Structure against Dropped Object Impacts
0
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
Subsea structures are always vulnerable to accidental risks induced by fishing gear, dropped objects, etc. This paper presents the design of a subsea manifold protective structure that protects against dropped object impacts. Probable dropped object scenarios were established considering the shapes and masses of the dropped objects. A design layout for the manifold protective structure was proposed, with detailed scantlings and material specifications. A method applicable to the pipelines specified in DNV-RP-F107(DNV, 2010) was applied to calculate the annual probabilities of dropped objects hitting the subsea manifold. Nonlinear finite element analyses provided the structural consequences due to the dropped object impacts such as the maximum deflections of the protective structure and the local fracture occurrences. A user-subroutine to implement the three-dimensional fracture strain surface was used to determine whether local fractures occur. The proposed protective structure was shown to withstand the dropped object impact loads in terms of the maximum deflections, even though local fractures could induce accelerated corrosion.
Abstract
Subsea structures are always vulnerable to accidental risks induced by fishing gear, dropped objects, etc. This paper presents the design of a subsea manifold protective structure that protects against dropped object impacts. Probable dropped object scenarios were established considering the shapes and masses of the dropped objects. A design layout for the manifold protective structure was proposed, with detailed scantlings and material specifications. A method applicable to the pipelines specified in DNV-RP-F107(DNV, 2010) was applied to calculate the annual probabilities of dropped objects hitting the subsea manifold. Nonlinear finite element analyses provided the structural consequences due to the dropped object impacts such as the maximum deflections of the protective structure and the local fracture occurrences. A user-subroutine to implement the three-dimensional fracture strain surface was used to determine whether local fractures occur. The proposed protective structure was shown to withstand the dropped object impact loads in terms of the maximum deflections, even though local fractures could induce accelerated corrosion.
참고문헌 (26)
- Aanesland, V., "Numerical and Experimental Investigation of Accidental Falling Drilling Pipes", Proceeding of the 19th Offshore Technology Conference (1987)
- ANSI, "API Recommended Practice 17P Design and Operation of Subsea Production Systems-Subsea Structures and Manifolds", American Petroleum Institute, 2013
- API Recommended Practice 2FB Recommended Practice for the Design of Offshore Facilities Against Fire and Blast Loading, "American Petroleum Institute", API, ~ (2006)
- Arasaratnam, P., "True Stress-True Strain Models for Structural Steel Elements", International Scholarly Research Network, 2011 (2011)
- Bai, Y., "A New Model of Metal Plasticity and Fracture with Pressure and Lode Dependence", International Journal of Plasticity, 24(6), pp.1071~1096 (2008)
- Bai, Y, "Application of Extended Mohr-Coulomb Criterion to Ductile Fracture", International Journal of Fracture, 161, pp.1~20 (2010)
- Basu, S., "On the Path-dependence of the Fracture Locus in Ductile Materials: Experiments", International Journal of Solids and Structures, 71, pp.79~90 (2015)
- Benzerga, A. A., "On the Path-dependence of the Fracture Locus in Ductile Materialsanalysis", International Journal of Plasticity, 37, pp.157~170 (2012)
- 정준모, "저온용 고장력강(EH36)의 평균 응력 삼축비에 따른 파단 변형률 정식화", 한국해양공학회지, 27(2), pp.19~26 (2013), 한국해양공학회
- 정준모, "상용 유한요소코드 사용자-서브루틴을 이용한 저온용 고장력강 (EH36)의 파단 시뮬레이션", 한국해양공학회지, 28(1), pp.34~46 (2014), 한국해양공학회
- Choung, J., "Failure Strain Formulation Via Average Stress Triaxiality of an High Strength Steel for Arctic Structures", Ocean Engineering, 91, pp.33~46 (2014)
- 정준모, "극한지용 고장력강의 평균 응력 삼축비 및 평균 정규 로드 파라메터를 고려한 3차원 파단 변형률 평면 개발: 제1부 이론적 배경과 실험적 연구", 한국해양공학회지, 29(6), pp.445~453 (2015), 한국해양공학회
- 정준모, "극한지용 고장력강의 평균 응력 삼축비 및 평균 정규 로드 파라메터를 고려한 3차원 파단 변형률 평면 개발: 제2부 파단 변형률 평면의 정식화", 한국해양공학회지, 29(6), pp.454~462 (2015), 한국해양공학회
- 정준모, "조선 해양 구조물용 강재의 소성 및 파단 특성 III: 파단 변형률에 관한 실험적 연구", 한국해양공학회지, 25(3), pp.53~65 (2011), 한국해양공학회
- Choung, J., "Estimation of Failure Strain of EH36 High Strength Marine Structural Steel using Average Stress Triaxiality", Marine Structures, 29(1), pp.1~21 (2012)
- Det Norske Veritas, "Recommend and Practice DNV-RP-F107 Risk Assessment of Pipeline Protection", DNV, ~ (2010)
- Dunnad, M., "On the Predictive Capabilities of the Shear Modified Gurson and the Modified Mohr-Coulomb Fracture Models over a Wide Range of Stress Triaxialities and Load Angles", Journal of the Mechanics and Physics of Solids, 59(7), pp.1374~1394 (2011)
- Katteland, L. H., "Risk Analysis of Dropped Objects for Deep Water Development", International Conference on Offshore Mechanics and Arctic Engineering, pp.18~22 (1995)
- Liping, S., "A Simplified Probabilistic Method for Dropped Objects Hitting Subsea Equipment", International Conference on Ships and Offshore Structures, pp.89~98 (2016)
- Lou, Y., "New Ductile Fracture Criterion for Prediction of Facture Forming Limit Diagrams of Sheet Metal", International Journal of Solids and Structures, 49(25), pp.3605~3615 (2012)
- Lou, M., "Numerical Failure Analysis of a Stretch-bending Test on Dual-phase Steel Sheets Using a Phenomenological Fracture Model", International Journal of Solids and Structures, 47(22), pp.3084~3102 (2010)
- Norsk Sokkels Konkurranseposisjon, "NORSOK Stnadard U-001, Subsea Production Systems", NORSOK, ~ (2002)
- 박세용, "심해저 원유 생산용 매니폴드 프레임 구조 기본 설계", 한국해양공학회지, 29(3), pp.207~216 (2015), 한국해양공학회
- Simulia, "Abaqus User Manual", Silumia, ~ (2008)
- Thomas, N., "On Fracture Loci of Ductile Materials under Non-proportional Loading", International Journal of Mechanical Sciences, 117, pp.135~151 (2016)
- Yu, H., "Effects of Loading Path on the Fracture Loci in a 3D Space", Engineering Fracture Mechanics, 151, pp.22~36 (2016)