NO96타입 LNG 방열시스템 Divinycell의 극저온 압축 강도 평가
Evaluation of Cryogenic Compressive Strength of Divinycell of NO 96-type LNG Insulation System
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Divinycell, which functions as both insulation and a supporting structure, is generally applied in the NO96-type liquefied natural gas (LNG) insulation system. Polymer-material-based Divinycell, which has a high strength and low weight, has been widely used in the offshore, transportation, wind power generation, and civil engineering fields. In particular, this type of material receives attention as an insulation material because its thermal conductivity can be lowered depending on the ambient temperature. However, it is difficult to obtain research results for Divinycell, even though the component materials of the NO96-type LNG cargo containment system, such as 36% nickel steel (invar steel), plywood, perlite, and glass wool, have been extensively studied and reported. In the present study, temperature and strain-rate dependent compressive tests on Divinycell were performed. Both the quantitative experimental data and elastic recovery are discussed. Finally, the mechanical characteristics of Divinycell were compared to the results of polyurethane foam insulation material.
Abstract
Divinycell, which functions as both insulation and a supporting structure, is generally applied in the NO96-type liquefied natural gas (LNG) insulation system. Polymer-material-based Divinycell, which has a high strength and low weight, has been widely used in the offshore, transportation, wind power generation, and civil engineering fields. In particular, this type of material receives attention as an insulation material because its thermal conductivity can be lowered depending on the ambient temperature. However, it is difficult to obtain research results for Divinycell, even though the component materials of the NO96-type LNG cargo containment system, such as 36% nickel steel (invar steel), plywood, perlite, and glass wool, have been extensively studied and reported. In the present study, temperature and strain-rate dependent compressive tests on Divinycell were performed. Both the quantitative experimental data and elastic recovery are discussed. Finally, the mechanical characteristics of Divinycell were compared to the results of polyurethane foam insulation material.
참고문헌 (11)
- 장철웅, "멤브레인 LNG 선박용 강화 폴리우레탄폼의 극저온 거동 연구", 한국해양공학회지, 27(1), pp.74~79 (2013), 한국해양공학회
- 박두환, "6000계열 알루미늄 합금의 극저온 기계적 거동 연구", 한국해양공학회지, 29(1), pp.85~93 (2015), 한국해양공학회
- "Divinycell CY SI" (2016)[URL]
- 김정현, "사용자지정 재료 서브루틴을 활용한 LNG선박 단열시스템 멤브레인의 수치해석", 한국전산구조공학회논문집, 27(4), pp.265~272 (2014), 한국전산구조공학회[DOI]
- 김경수, "SUS304L 겹침 용접부에 대한 극저온에서의 인장 및 피로강도에 관한 실험적 연구", 한국해양공학회지, 22(3), pp.96~102 (2008), 한국해양공학회
- Chun, M. S, "Experimental Investigation on the Impact Behavior of Membrane-type LNG Carrier Insulation System", Journal of Loss Prevention in the Process Industries, 22, pp.901~907 (2009)
- Thirumal, M. Khastgir, D, "Effect of Foam Density on the Properties of Water Blown Rigid Polyurethane Foam", Journal of Applied Polymer Science, 108, pp.1810~1817 (2008)
- 박성보, "폴리머 폼의 선박 및 해양구조물 적용을 위한 극저온 기계적 거동 특성 분석", 대한조선학회 논문집, 51(6), pp.495~502 (2014), 대한조선학회
- Kim, S. K, "Computational Evaluation of Resistance of Fracture Capacity for SUS304L of Liquefied Natural Gas Insulation System under Cryogenic Temperatures Using ABAQUS User-defined Material Subroutine", Materials & Design, 50, pp.522~532 (2013)
- Seo, W. J, "Mechanical, Morphological, and Thermal Properties of Rigid Polyurethane Foams Blown by Distilled Water", Journal of Applied Polymer Science, 90, pp.12~21 (2003)
- Tu, Z. H, "Plastic Deformation Modes in Rigid Polyurethane foam under Static Loading", International Journal of Solids and Structures, 38, pp.9267~9279 (2001)