Dynamic Response of Drill Floor to Fire Subsequent to Blowout
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Explosions and fires on offshore drilling units and process plants, which cause loss of life and environmental damage, have been studied extensively. However, research on drilling units increased only after the 2010 Deepwater Horizon accident in the Gulf of Mexico. A major reason for explosions and fires on a drilling unit is blowout, which is caused by a failure to control the high temperatures and pressures upstream of the offshore underwater well. The area susceptible to explosion and fire due to blowout is the drill floor, which supports the main drilling system. Structural instability and collapse of the drill floor can threaten the structural integrity of the entire unit. This study simulates the behavior of fire subsequent to blowout and assesses the thermal load. A heat transfer structure analysis of the drill floor was carried out using the assessed thermal load, and the risk was noted. In order to maintain the structural integrity of the drill floor, passive fire protection of certain areas was recommended.
Abstract
Explosions and fires on offshore drilling units and process plants, which cause loss of life and environmental damage, have been studied extensively. However, research on drilling units increased only after the 2010 Deepwater Horizon accident in the Gulf of Mexico. A major reason for explosions and fires on a drilling unit is blowout, which is caused by a failure to control the high temperatures and pressures upstream of the offshore underwater well. The area susceptible to explosion and fire due to blowout is the drill floor, which supports the main drilling system. Structural instability and collapse of the drill floor can threaten the structural integrity of the entire unit. This study simulates the behavior of fire subsequent to blowout and assesses the thermal load. A heat transfer structure analysis of the drill floor was carried out using the assessed thermal load, and the risk was noted. In order to maintain the structural integrity of the drill floor, passive fire protection of certain areas was recommended.
참고문헌 (21)
- "Case Study 2: Deepwater Drilling with Surface BOP from a Floating Facility" (2015)[URL]
- Ahmad, A., "A Risk-based Method for Determining Passive Fire Protection Adequacy", Fire Safety Journal, 58, pp.160~169 (2013)[DOI]
- Amdahl, J., "Ultimate Strength of Structural Members with Attachments during Accidental Fires", Proceedings of International Conference of Response of Structures to Extreme Loading (2003)
- American Petroleum Institute(API), "Recommended Practice for the Design of Offshore Facilities Against Fire and Blast Loading" (2006), API Publishing Services
- Bai, Y., "Marine Structural Design" (2016), Elsevier Butterworth Heinemann
- British Standards Institution(BSI), "EN 1993-1-2: Eurocode 3:Design of Steel Structures, Part 1-2: General Rules–Structural Fire Design", British Standards Institution, ~ (2005)
- Dadashzadeh, M., "Explosion Modeling and Analysis of BP Deepwater Horizon accident", Safety Science, 57, pp.150~160 (2013)[DOI]
- Det Norske Veritas (DNV), "Determination of Structural Capacity by Non-linear FE Analysis Methods (DNV-RP-C208)", Det Norske Veritas, ~ (2013)
- Fiona M., "Piper Alpha-What Have We Learned?", Loss Prevention Bulletin, 261, pp.3~9 (2018)
- Martin Friebe, "A parametric study on the use of passive fire protection in FPSO topside module", International Journal of Naval Architecture and Ocean Engineering, 6(4), pp.826~839 (2014), 대한조선학회
- "The Deepwater Horizon Incident:Fire and Explosion Issues" (2017)[URL]
- Jin, Y., "Probabilistic Fire Risk Analysis and Structural Safety Assessment of FPSO Topside Module", Ocean Engineering, 104, pp.725~737 (2015)[DOI]
- Jin, Y., "Fire Risk Analysis Procedure Based on Temperature Approximation for Determination of Failed Area of Offshore Structure : Living Quarters on Semidrilling Rig", Ocean Engineering, 126, pp.29~46 (2016)[DOI]
- Kim, J. H., "A Study on Methods for Fire Load Application with Passive Fire Protection Effects", Ocean Engineering, 70, pp.177~187 (2013)[DOI]
- Lazarus, N. W., "A County-Level Risk Assessment of the Deep Water Horizon Oil Spill in the Gulf of Mexico", Geographical Review, 106(3), pp.360~380 (2016)[DOI]
- Santosa Basin BM-S Cluster Region, "MetOcean Data", Petrobras, ~ (2008)
- Skogdalen, J. E., "Quantitative Tisk Snalysis of Oil and Gas Drilling, using Deepwater Horizon as Case Study", Reliability Engineering & System Safety, 100, pp.58~66 (2012)[DOI]
- Suardin, J. A., "Fire and Explosion Assessment on Oil and Ggas Floating Production Storage Offloading(FPSO) : An Effective Screening and Comparison Tool", Process Safety and Environmental Protection, 87(3), pp.147~160 (2009)[DOI]
- USFOS A, "S", User’s Manual for FAHTS (Version 637), S, pp.2013, ~
- USFOS A, "S", User’s Manual for USFOS (Version 86a), S, pp.2013, ~
- Vembe, B. E., "User’s Manual for Kameleon FireEx" (2014), Computational Industry Technologies AS