자동차 승객용 에어백 하우징의 사출성형 해석 연구
A study on passenger air bag housing by injection molding analysis
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Plastic material has been applied to many automobile parts with the automotive lightweighting trend. In this study, a passenger air bag(PAB) housing which is produced by steel material in the present were molded using a plastics material. Before design and making of a mold for the PAB housing molding, it was carried out injection molding analysis. By analyzing the deformation results, the correction dimension for mold designing was determined. The design and manufacturing the mold applied the correction dimension were conducted. It was performed actual injection molding. The warpage value of the PAB housing was similar to the warpage of the injection molding analysis.
Abstract
Plastic material has been applied to many automobile parts with the automotive lightweighting trend. In this study, a passenger air bag(PAB) housing which is produced by steel material in the present were molded using a plastics material. Before design and making of a mold for the PAB housing molding, it was carried out injection molding analysis. By analyzing the deformation results, the correction dimension for mold designing was determined. The design and manufacturing the mold applied the correction dimension were conducted. It was performed actual injection molding. The warpage value of the PAB housing was similar to the warpage of the injection molding analysis.
참고문헌 (5)
- 한성렬, "사출성형 조건과 ABS 성형품 광택의 관계", 한국산학기술학회논문지, 14(11), pp.5352~5356 (2013), 한국산학기술학회[DOI]
- Han, K.T., "A study on the filling imbalance of polyamide molding by Taguchi method", Journal of the Korean Society of Manufacturing Process Engineers, 3(4), pp.95~100 (2004)
- Shida, R., "Effect of automobile lightening by CFRP on the world energy saving", The Ninth Japan International SAMPE symposium, pp.8~13 (2005)
- 천두만, "차량 경량화를 위한 사출성형 유리섬유강화플라스틱의 온도 및 수분흡수에 따른 기계적 물성 변화", 대한기계학회논문집 A, 37(2), pp.199~204 (2013), 대한기계학회
- 박철우, "Moldflow를 이용한 드럼세탁기 케이스의 사출성형공정에 관한 연구", 한국마린엔지니어링학회지, 33(1), pp.90~96 (2009), 한국마린엔지니어링학회