비공기압 방식 소형 산업용 바퀴의 설계를 위한 수치해석과 진동실험에 관한 연구
A study on design of non-pneumatic small industrial wheel using FEM and vibration tests
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This paper presents a numerical study for the development of a low-noise low-vibration industrial wheel for non-pneumatic wheel to significantly reduce vibration and noise. For this, design, injection molding and performance testing were performed. Various geometric shapes and materials were taken into account. For numerical analysis, ANSYS, LS-Dyna, and ABAQUS were used to predict the behavior of the wheel under different loadings based on various design changes. Based on this, 4 prototypes were fabricated by changing the design of wheels and molds, and various vibration and noise tests were carried out. A vibration tester was developed and tested to perform the vibration noise test considering durability. A prototype and test of the final wheel was performed. In the case of the vibration test, the vibration levels were 81.16dB and 80.66dB, which were below the target 90dB. Noise levels were 53.20 dB and 52.55 dB below the target 65dB. In the case of the impact resistance test, it was confirmed that there was no change in appearance after impact. The product weight was measured to be 174g compared to the target of 190g
Abstract
This paper presents a numerical study for the development of a low-noise low-vibration industrial wheel for non-pneumatic wheel to significantly reduce vibration and noise. For this, design, injection molding and performance testing were performed. Various geometric shapes and materials were taken into account. For numerical analysis, ANSYS, LS-Dyna, and ABAQUS were used to predict the behavior of the wheel under different loadings based on various design changes. Based on this, 4 prototypes were fabricated by changing the design of wheels and molds, and various vibration and noise tests were carried out. A vibration tester was developed and tested to perform the vibration noise test considering durability. A prototype and test of the final wheel was performed. In the case of the vibration test, the vibration levels were 81.16dB and 80.66dB, which were below the target 90dB. Noise levels were 53.20 dB and 52.55 dB below the target 65dB. In the case of the impact resistance test, it was confirmed that there was no change in appearance after impact. The product weight was measured to be 174g compared to the target of 190g
참고문헌 (7)
- Zheng, J., "Design and terramechanics analysis of a Mars rover utilising active suspension", Mechanism and Machine Theory, 128, pp.125~149 (2018)
- Khaleghian, S., "Terrain classification using intelligent tire", Journal of Terramechanics, 71, pp.15~24 (2017)
- Zhao., "Non-pneumatic mechanical elastic wheel natural dynamic characteristics and influencing factors", Journal of Central South University, 22, pp.1707~1715 (2015)
- Jin, X., "Investigation on the static and dynamic behaviors of non-pneumatic tires with honeycomb spokes", Composite Structures, 187, pp.27~35 (2018)
- 김광원, "Auxetic Spoke로 설계된 비공기압 타이어의 접지압", 한국항공우주학회지, 39(8), pp.719~724 (2011), 한국항공우주학회
- Jin, X., "Investigation on the static and dynamic behaviors of non-pneumatic tires with honeycomb spokes", Composite Structures, 187, pp.27~35 (2018)
- 이정호, "자동차 휠 축에 대한 형상별 강도 해석 연구", 예술인문사회 융합 멀티미디어 논문지, 5(3), pp.283~290 (2015), 사단법인 인문사회과학기술융합학회[DOI]