마이크로 금형 부품을 위한 마이크로 절삭가공 기술
Micro cutting process technology for micro molds parts
1
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
In this paper, we studied the micro tool deflection, micro cutting with low temperature, and deformation of micro ribs caused by cutting forces. First, we performed an integrated machining error compensation method based on captured images of tool deflection shapes in micro cutting process. In micro cutting process, micro tool deflection generates very serious problems in contrast to macro tool deflection. To get the real images of micro tool deflection, it is possible to estimate tool deflection in cutting conditions modeled and to compensate for machining errors using an iterative algorithm correcting tool path. Second, in macro cutting fields, the cryogenic cutting process has been applied to cut the refractory metal but, the serious problem may be generated in micro cutting fields by the cryogenic environment. However, if the proper low temperature is applied to micro cutting area, the cooling effect of cutting heat is expected. Such effect can make the reduction of tool wear and burr formation. For verifying this passibility, the micro cutting experiment at low temperature was performed and SEM images were analyzed. Third, the micro pattern was deformed by the cutting forces and the shape error occurred in the sidewall multi-step cutting process were minimized. As the results, the relationship between the cutting conditions and the deformation of micro-structure during micro cutting process was investigated.
Abstract
In this paper, we studied the micro tool deflection, micro cutting with low temperature, and deformation of micro ribs caused by cutting forces. First, we performed an integrated machining error compensation method based on captured images of tool deflection shapes in micro cutting process. In micro cutting process, micro tool deflection generates very serious problems in contrast to macro tool deflection. To get the real images of micro tool deflection, it is possible to estimate tool deflection in cutting conditions modeled and to compensate for machining errors using an iterative algorithm correcting tool path. Second, in macro cutting fields, the cryogenic cutting process has been applied to cut the refractory metal but, the serious problem may be generated in micro cutting fields by the cryogenic environment. However, if the proper low temperature is applied to micro cutting area, the cooling effect of cutting heat is expected. Such effect can make the reduction of tool wear and burr formation. For verifying this passibility, the micro cutting experiment at low temperature was performed and SEM images were analyzed. Third, the micro pattern was deformed by the cutting forces and the shape error occurred in the sidewall multi-step cutting process were minimized. As the results, the relationship between the cutting conditions and the deformation of micro-structure during micro cutting process was investigated.
참고문헌 (23)
- 제태진, "미세패턴 평판 금형가공 기술동향", 한국기계가공학회지, 11(2), pp.1~6 (2012), 한국기계가공학회
- 이석우, "대면적 미세 가공공정 원천기술 개발", 한국정밀공학회지, 28(7), pp.769~776 (2011), 한국정밀공학회
- 김건희, "철계 금속 마이크로 절삭 가공시 저온 환경에서의 버 발생에 관한 기초연구", 소성∙가공, 18(2), pp.166~171 (2009), 한국소성∙가공학회
- 신봉철, "Micro EDM을 이용한 Lab-on-a-chip금형의 미세 패턴 제작에 관한 연구", 소성∙가공, 20(1), pp.17~22 (2011), 한국소성∙가공학회
- A. B. M. A. Asad, "Tool-based micro-machining", Journal of Materials Processing Technology, 192-193, pp.204~211 (2007)
- J. Chae, "Investigation of micro-cutting operations", International Journal of Machine Tools & Manufacture, 46, pp.313~332 (2006)
- E. Budak, "Peripheral milling conditions for improved dimensional accuracy", International Journal of Machine Tools & Manufacture, 34, pp.907~918 (1994)
- 최성윤, "평엔드밀 포켓가공시 절삭력과 공구변형에 관한 연구", 한국기계가공학회지, 16(2), pp.28~33 (2017), 한국기계가공학회[DOI]
- 임정수, "유한요소법을 이용한 마이크로 평엔드밀링에서의 공구변형 예측", 한국생산제조학회지, 19(4), pp.498~503 (2010), 한국생산제조학회
- Thomas A. Dow, "Tool force and deflection compensation for small milling tools", Precision engineering, 28, pp.31~45 (2004)
- 김도영, "티타늄 합금 소재 저속 영역 극저온 가공 특성 연구", 한국정밀공학회지, 34(4), pp.237~241 (2017), 한국정밀공학회
- 황지홍, "액화질소를 이용한 오픈 셀 실리콘 폼의 냉동 절삭조건 최적화", 한국생산제조학회지, 23(1), pp.32~37 (2014), 한국생산제조학회[DOI]
- G. H. Kim, "A study on the characteristics of burr formation in low temperature micro cutting process of the mold core material", Korean Society of Manufacturing Process Engineering Spring, pp.131~136 (2009)
- G. H. Kim, "A study on the micro-cutting process characteristics of copper for manufacturing a subminiature radiation plate", Korean Society of Manufacturing Process Engineering Spring, pp.296~301 (2008)
- D. Cox, "Performace evaluation of a miniaturized machining center for precision manufacturing", Proceedings ASME International Mechanical Engineering Congress and Exposition (2004)
- G. H. Kim, "Development of a micro tool inspection and verification system", International Conference on Mechanical &Manufacturing Engineering (2008)
- S. H. Ryu, "Form error prediction in side wall milling considering tool deflection", Journal of the Korean Society of Manufacturing Process Engineering, 21(6), pp.43~51 (2004)
- S. G. Heo, "Real-time compensation of machining error induced by tool deflection in micromilling processes", Korean Society of Manufacturing Process Engineering Spring, pp.647~648 (2010)
- W. A. Kline, "The prediction of surface accuracy in end milling", Transactions of the ASME, 104, pp.272~278 (1982)
- Sinan Filiz, "An experimental investigation of micro-machinability of copper 101 using tungsten carbide micro-endmills", International Journal of Machine Tools & Manufacture, 47, pp.1088~1100 (2007)
- P. Li, "Micromilling of thin ribs with high aspect ratios", Journal of Micromechanics and Microengineering, 20, pp.1~10 (2010)
- Yu Liu, "Micro milling of copper thin wall structure", International Journal of Advanced Manufacturing Technology, 90, pp.405~412 (2017)
- K Popov, "Micromilling strateies for machining thin features", Journal of Mechanical Engineering Science, 220, pp.1677~1684 (2006)