금형강의 절삭 가공 최적화에 관한 연구
A Study on The Optimization of Cutting Processing of Mold Steel
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Molds are actively used for mass production of products such as mobile phones. Molds are required to be durable and have a high level of surface roughness. Therefore, the optimization of mold processing is essential. In this study, the cutting processing of SDP20 steel used in molds was analyzed and optimized. This study is expected to contribute to the improvement of product productivity to which plastics are applied.
Abstract
Molds are actively used for mass production of products such as mobile phones. Molds are required to be durable and have a high level of surface roughness. Therefore, the optimization of mold processing is essential. In this study, the cutting processing of SDP20 steel used in molds was analyzed and optimized. This study is expected to contribute to the improvement of product productivity to which plastics are applied.
참고문헌 (7)
- D. J. Kim, "The Prediction of Geometrical Config-uration and Ductile Fracture Using the Artificial Neural Network for a Cold Forged Product", Journal of the Korean Society for Precision Engineering, 13(10), pp.105~111 (1996)
- Study on the Machinning Characteristics of SDP20 Steel, "E. N. Kim", Jeon-buk National University, ~ (2019)
- J. H. Lee, "A Study on Tool Wear in Machining of A182 F92 of Power Plant Valve Steel", Proceedings of the KSMPE Conference, pp.155~155 (2018)
- D. C. Kang, "Analysis of Structural Safety of a Nuclear Plant Annunciator Panel under Seismic", Journal of the Korean Society of Manufacturing Process Engineers, 16(1), pp.83~89 (2013)
- 김재웅, "A study on an efficient prediction of welding deformation for T-joint laser welding of sandwich panel PART I : Proposal of a heat source model", International Journal of Naval Architecture and Ocean Engineering, 5(3), pp.348~363 (2013), 대한조선학회
- J. D. Kim, "Configuration of Crater Wear Geometry and its Compensation", Proceedings of the KSMPE Spring Conference (2017)
- 김기하, "티타늄합금 황삭가공에서 냉각방법에 따른 절삭공구 마모특성에 관한 연구", 한국기계가공학회지, 12(5), pp.129~134 (2013), 한국기계가공학회