나노초 레이저 가공을 활용한 초소수 표면 특성을 가지는 사출 금형에 관한 연구
A Study on the Injection Mold with Superhydrophobic Surface Properties Using Nanosecond Laser Machining
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this study, an injection mold with ultra-small surface properties was manufactured using nanosecond laser processing. A superhydrophobic characteristic analysis was performed on the PET specimen manufactured through this. To this end, a hydrophobic pattern was defined using the Cassie-Baxter model. The defined features were selected with a spot diameter of 25um and pitch spacing of 30um and 35um. As a result of the basic experiment, it was confirmed that the fine pattern shape had an aspect ratio of 1:1 when the pitch interval was 35um and 20 iterations. Through the determined processing conditions, a hydrophobic pattern was implemented on the core surface of KP4. A specimen with a hydrophobic pattern was produced through injection molding. The height of the molded hydrophobic pattern is 20 μm less than the depth of the core and the contact angle measurement results are 92.1°. This is a contact angle smaller than the superhydrophobic criterion. Molding analysis was performed to analyze the cause of this, and it was analyzed that the molding was not molded due to the lack of pressure in the injection machine.
Abstract
In this study, an injection mold with ultra-small surface properties was manufactured using nanosecond laser processing. A superhydrophobic characteristic analysis was performed on the PET specimen manufactured through this. To this end, a hydrophobic pattern was defined using the Cassie-Baxter model. The defined features were selected with a spot diameter of 25um and pitch spacing of 30um and 35um. As a result of the basic experiment, it was confirmed that the fine pattern shape had an aspect ratio of 1:1 when the pitch interval was 35um and 20 iterations. Through the determined processing conditions, a hydrophobic pattern was implemented on the core surface of KP4. A specimen with a hydrophobic pattern was produced through injection molding. The height of the molded hydrophobic pattern is 20 μm less than the depth of the core and the contact angle measurement results are 92.1°. This is a contact angle smaller than the superhydrophobic criterion. Molding analysis was performed to analyze the cause of this, and it was analyzed that the molding was not molded due to the lack of pressure in the injection machine.
참고문헌 (10)
- Kim, W. D., "Technology development of nano- hair mature mininking", Korea Institute of Materials Science, 17(1), pp.13~25 (2005)
- Kang, M. K., "Performance of anti-icing surface in low temperature using the drop impact behavior", The Society Of Air-Conditioning And Refrigerating Engineers Of Korea, pp.225~228 (2014)
- Bhushan, B., "Natural and biomimetic artificial surfaces for superhydrophobicity self-cleaning low adhesion and drag reduction", Progress in Materials Science, 56, pp.108~ (2011)
- 박영환, "와이어 방전가공을 이용한 상어 표피 모사 리블렛 표면 제작", 한국트라이볼로지학회지, 32(6), pp.201~206 (2016), 한국트라이볼로지학회[DOI]
- 고태조, "연삭기법을 이용한 패터닝 기술", 한국정밀공학회지, 31(5), pp.367~373 (2014), 한국정밀공학회
- Cai, Y., "A Study on the Fabrication of Micro Pattern based Maskless Lithography depend on Surface Roughness for Superhydrophobic Surface", Korean Society for precision Engineering, 2014(5), pp.188~188 (2014)
- 조일환, "피코초 레이저를 이용한 초소수성 표면 제작에 관한 연구", 한국정밀공학회지, 29(2), pp.161~169 (2012), 한국정밀공학회
- Cassie, A. B. D., "Wettability of Porous Surfaces", Transactions of the Faraday Society, 40(0), pp.546~551 (1944)
- Long, J., "Cassie-State Stability of Metallic Superhydrophobic Surfaces with various Micro", Nanostructures Produced by a Femtosecond Laser, 2016, pp.32(4), 1065~1072
- 임동욱, "초발수 표면을 만들기 위한 마이크로-나노 몰드 제작 공정", Design & Manufacturing, 15(4), pp.57~64 (2021), 한국금형공학회[DOI]