본문 바로가기
KERD
논문KCI 등재

방사선을 이용하여 제조한 poly(vinyl alcohol)/poly(acrylic acid) 하이드로젤의 제조 및 특성

Preparation and Characterization of Poly(vinyl alcohol)/Poly(acrylic acid) Hydrogel by Radiation

2

조회

0

다운로드

0

인용

0

참고문헌

키워드

초록

Poly(vinyl alcohol) (PVA) is an interesting material with good biocompatibility, highelasticity and hydrophilic chacrateristics. In this study, crosslinked hydrogels based on PVA, andpoly(acrylic acid) (PAAc) were prepared by gamma-ray irradiation. PVA and PAAc powders weredissolved in deionized water, and then irradiated by a gamma-ray with a radiation dose of 50 kGyto make hydrogels. The hydrogels were then annealed in an oven at 120􀆆􀆆C for 10 min, 30 min and50 min under nitrogen atmosphere. The properties of a hydrogel such as gel fraction, swellingbehavior, thermogravimetric analysis (TGA) and adhesive strength as a function of PAAc contentand annealing time were investigated. The gel fraction decreases with decreasing PAAc contentand increasing annealing time. The thermal behaviors have shown different patterns according tothe annealing time. The adhesive strength increases with increasing PAAc content.

Abstract

Poly(vinyl alcohol) (PVA) is an interesting material with good biocompatibility, highelasticity and hydrophilic chacrateristics. In this study, crosslinked hydrogels based on PVA, andpoly(acrylic acid) (PAAc) were prepared by gamma-ray irradiation. PVA and PAAc powders weredissolved in deionized water, and then irradiated by a gamma-ray with a radiation dose of 50 kGyto make hydrogels. The hydrogels were then annealed in an oven at 120􀆆􀆆C for 10 min, 30 min and50 min under nitrogen atmosphere. The properties of a hydrogel such as gel fraction, swellingbehavior, thermogravimetric analysis (TGA) and adhesive strength as a function of PAAc contentand annealing time were investigated. The gel fraction decreases with decreasing PAAc contentand increasing annealing time. The thermal behaviors have shown different patterns according tothe annealing time. The adhesive strength increases with increasing PAAc content.

참고문헌 (14)

  1. Ajji Z, "Preparation of poly(vinyl alcohol)hydrogels containing citric or succinic acid using gamma radiation", Radiat. Phys. Chem, 74, pp.36~41 (2005)
  2. Benamer S, "Synthesis and characterisation of hydrogels based on poly(vinyl pyrrolidone)", Nucl. Instrum. Methods Phys. Res. B, 248, pp.284~290 (2006)
  3. Gwon HJ, "Humectants effect on aqueous fluids absorption of γ-irradiated PVA hydrogel followed by freeze thawing", Radiat. Phys. Chem, 79, pp.650~653 (2010)
  4. Hassan CM, "Structure and applications of poly(vinyl alcohol) hydrogels produced by conventional crosslinking or by freezing", thawing methods, 2000, pp.153, 37~65
  5. Krishnan BR, "Current status of DNA vaccines in veterinary medicine", Adv. Drug. Deliv. Rev, 43, pp.3~11 (2002)
  6. Martens P, "Characterization of hydrogels formed from acrylate modified poly(vinyl alcohol)macromers", Polymer, 41, pp.7715~7722 (2000)
  7. Onuki Y, "Formulation optimization of photocrosslinked polyacrylic acid modified with 2-hydroxyethyl methacrylate hydrogel as an adhesive for a dermatological patch", J. Control. Release, 108, pp.331~340 (2005)
  8. Onuki Y, "Development of photocrosslinked polyacrylic acid hydrogel as an adhesive for dermatological patches : Involvement of formulation factors in physical properties and pharmacological effects", Int. J. Pharm, 349, pp.47~52 (2008)
  9. Ossipov DA, "Poly(vinyl alcohol)-based hydrogels formed by"Click Chemistry"", Macromolecules, 39, pp.1709~1718 (2006)
  10. Park KR, "Preparation and its application for wound dressing of gelatin hydrogel and PVP", gelatin by radiation crosslinling, 2001, pp.12, 718~723
  11. Purss HK, "Effect of"glutaraldehyde"functionality on network formation in poly(vinyl alcohol)membranes", J. Appl. Polym. Sci, 96, pp.780~792 (2005)
  12. Qi M, "PVA hydrogel sheet macroencapsulation for the bioartificial pancreas", Biomaterials, 25, pp.5885~5892 (2004)
  13. Zakuraeva OA, "Radiation-chemical synthesis of poly(vinyl alcohol)hydrogel containing dicyclohexano-18-crown-6", Nucl. Instr. Meth. Phys. Res. B, 265, pp.356~361 (2007)
  14. Zhang DK, "Research on the long time swelling properties of poly(vinyl alcohol)", hydroxylapatite composite hydrogel, 2009, pp.6, 22~28

관련 논문AI추천

방사선과 열처리된 폴리비닐알콜 섬유의 물리적 변화강필현, 노영창, 박경란, 박종석, 임윤묵(사)한국방사선산업학회 · 방사선산업학회지2016 · 제10권 제2호방사선을 이용하여 제조한 zinc oxide 입자 함유poly(acrylic acid) 하이드로젤의 특성강필현, 권희정, 김현빈, 노영창, 박종석, 신영민, 오승환, 임윤묵, 전준표, 정성인, 최종배(사)한국방사선산업학회 · 방사선산업학회지2012 · 제6권 제2호방사선에 의해 제조된 전도성 실리콘/폴리아크릴산 하이드로겔의 기계적/전기적 특성 평가권희정, 박종석, 임윤묵, 정성인, 정진오(사)한국방사선산업학회 · 방사선산업학회지2019 · 제13권 제1호Hydrogen Bonding Effect on γ-Ray Irradiated Poly(vinyl alcohol) Hydrogels in Different Drying Conditions강필현, 권희정, 노영창, 박은지, 박종석, 신영민, 임윤묵, 조선영, 최종배(사)한국방사선산업학회 · 방사선산업학회지2012 · 제6권 제1호Synthesis and Biocompatibility of PVA/NaCMC Hydrogels Crosslinked by Cyclic Freezing/thawing and Subsequent Gamma-ray Irradiation신지연, 이득용, 정희석대한의용생체공학회 · 의공학회지2018 · 제39권 제4호방사선에 의해 제조된 폴리아크릴산 / 실리콘 하이드로겔의 첨가제 종류 및 함량에 따른 물리적 특성 평가김영아, 박종석, 임윤묵, 정성인, 정진오(사)한국방사선산업학회 · 방사선산업학회지2020 · 제14권 제4호

이 간행물의 다른 논문 (14건)