방사선에 의한 폐폴리우레탄의 분해 거동
Degradation Characteristics of Waste Polyurethane by Radiation
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Polyurethane (PU) is a very popular polymer that is used in a variety of applications due to its good mechanical, thermal, and chemical properties. However, waste PU recycling has received significant attention due to environmental issues. The aim of this work was to investigate the degradation characteristics of waste PU to recycle. Degradation of waste PU was carried out using a radiation techniques. Waste PUs were exposed to a gamma 60Co sources. To verify degradation, the irradiated PUs were characterized using FT-IR, gel permeation chromatography (GPC), and their thermal/mechanical properties are reported. When the radiation dose was 500 kGy, the molecular weight of the waste PU drastically decreased. Also, the mechanical properties of waste PU were approximately 4 times lower than those of non-irradiated PU. This study has confirmed the possibility of making fine particle of waste PU for recycling through radiation degradation techniques.
Abstract
Polyurethane (PU) is a very popular polymer that is used in a variety of applications due to its good mechanical, thermal, and chemical properties. However, waste PU recycling has received significant attention due to environmental issues. The aim of this work was to investigate the degradation characteristics of waste PU to recycle. Degradation of waste PU was carried out using a radiation techniques. Waste PUs were exposed to a gamma 60Co sources. To verify degradation, the irradiated PUs were characterized using FT-IR, gel permeation chromatography (GPC), and their thermal/mechanical properties are reported. When the radiation dose was 500 kGy, the molecular weight of the waste PU drastically decreased. Also, the mechanical properties of waste PU were approximately 4 times lower than those of non-irradiated PU. This study has confirmed the possibility of making fine particle of waste PU for recycling through radiation degradation techniques.
참고문헌 (16)
- 최재학, "방사선을 이용한 고분자 재료의 가공", 고분자과학과 기술, 18(3), pp.253~258 (2007)
- Becker D, "Blend of thermosetting polyurethane waste with polypropylene:influence of compatibilizing agent on the interface domains and mechanical properties", Polym. Test, 22, pp.225~230 (2003)
- Beyer G, "Flame Retardant Properties of EVA-Nanocomposites and improvements by combination of nanofillers with aluminum trihydrate", Fire. Mater, 25, pp.193~197 (2001)
- Duong HTT, "Effect of foam density, oil viscosity, and temperature on oil sorption behavior of polyurethane", J. Appl. Polym. Sci, 99, pp.360~367 (2006)
- Goel NK, "Development of functional absorbent from PU foam waste via radiation induced grafting I: Process parameter standardization", Radiat. Phys. Chem, 82, pp.85~91 (2013)
- Hayashi J, "Preparation and characterization of high-specificsurface-area activated carbon form K2CO3-treated waste polyurethane", J. Colloid Interf. Sci, 281, pp.437~443 (2005)
- Jeong JO, "Development of Styrene-Grafted Polyurethane by Radiation-Based Techniques", Materials, 9(441), pp.1~9 (2016)
- 김한나, "폴리우레탄 스크랩의 재활용", 엘라스토머 및 콤포지트, 47(2), pp.104~110 (2012), 한국고무학회
- Kim JH, "Controlling the morphology of polyurethane", polystyrene interpenetrating polymer networks for enhanced blood compatibility, 2002, pp.84, 379~387
- Koenig A, "Polyurethane-block-polystyrene prepared by polymerization in miniemulsion", Macromol. Chem. Physic, 208, pp.155~163 (2007)
- Makuuchi K, "Radiation Processing of Polymer Materials and Its Industrial Applications", pp.26~70 (2012)
- 명교림, "폐 폴리우레탄의 해중합 시 첨가된 pentaerythritol과 sorbitol이 재생 폴리올의 작용기 및 폴리우레탄의 기계적 물성에 미치는 영향", Korean Chemical Engineering Research(HWAHAK KONGHAK), 46(6), pp.1039~1042 (2008), 한국화학공학회
- Park JS, "Radiation-Induced Grafting with One-Step Process of Waste Polyurethane onto High-Density Polyethylene", Materials, 9(13), pp.1~8 (2016)
- Simon D, "Glycolysis of flexible polyurethane waste using stannous octoate as the catalyst: Study on the influence of reaction parameters", Polym. Degrad. Stab, 98, pp.144~149 (2013)
- Tanobe VOA, "Evaluation of flexible postconsumed polyurethane foams modified by polystyrene grafting as sorbent material of oil spills", J. Appl. Polym. Sci, 111, pp.1842~1849 (2009)
- Zia KM, "Methods for polyurethane and polyurethane composite, recycling and recovery:A review", React. Funct. Polym, 67, pp.675~692 (2007)