유무기 페로브스카이트 태양전지의 방사선 영향 평가
Radiation Effects of Organic/Inorganic Perovskite Photovoltaic Cells
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This study was to investigate the radiation effects of perovskite photoactive layers andunit cells. To evaluate morphological, electrical and long-term air-stability of three kinds of perovskitephotoactive materials, we conducted SEM, J-V and ambient endurance analyses. There were no morphologicalchanges of perovskite active layers after gamma irradiation up to 50 kGy compared to those ofpristine perovskite active layers. However, cell-performances were gradually decreased with increasinggamma irradiation doses due to the reduction of transmittance values of glass/ITO substrates. Amongthe three kinds of perovskite active materials, higher methylammonium (MA) contents showed morereduced power conversion efficiency and lower air-stability with increasing gamma irradiation doses.
Abstract
This study was to investigate the radiation effects of perovskite photoactive layers andunit cells. To evaluate morphological, electrical and long-term air-stability of three kinds of perovskitephotoactive materials, we conducted SEM, J-V and ambient endurance analyses. There were no morphologicalchanges of perovskite active layers after gamma irradiation up to 50 kGy compared to those ofpristine perovskite active layers. However, cell-performances were gradually decreased with increasinggamma irradiation doses due to the reduction of transmittance values of glass/ITO substrates. Amongthe three kinds of perovskite active materials, higher methylammonium (MA) contents showed morereduced power conversion efficiency and lower air-stability with increasing gamma irradiation doses.
참고문헌 (17)
- Shah A, "Photovoltaic Technology : The Case for Thin-film Solar Cells", Science, 285, pp.692~698 (1999)
- Saga T, "Advances in Crystalline Silicon Solar Cell Technology for Industrial Mass Production", NPG Asia Mater, 2, pp.96~102 (2010)
- Günes S, "Conjugated Polymer-based Organic Solar Cells", Chem. Rev, 107, pp.1324~1338 (2007)
- Cheng YJ, "Synthesis of Conjugated Polymers for Organic Solar Cell Applications", Chem. Rev, 109, pp.5868~5923 (2009)
- Kalowekamo J, "Estimating the Manufacturing Cost of Purely Organic Solar Cells", Sol. Energy, 83, pp.1224~1231 (2009)
- Lee MM, "Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites", Science, 338, pp.643~647 (2012)
- Li Z, "Scalable Fabrication of Perovskite Solar Cells", Nat. Rev. Mater, 3, pp.18017~ (2018)
- Green MA, "Solar Cell Efficiency Tables(Version 55)", Prog. Photovoltaics, 28, pp.3~15 (2020)
- Green MA, "Solar Cell Efficiency Tables(Version 53)", Prog. Photovoltaics, 27, pp.3~12 (2019)
- Green MA, "Solar Cell Efficiency Tables(Version 54)", Prog. Photovoltaics, 27, pp.565~575 (2019)
- Cho SP, "Highly-dispersible Reduced Graphene Oxide", Polymer Nanocomposites As Efficient Hole-transporting Materials for Perovskite Solar Cells, 2021, pp.201, 108548~
- Lee HJ, "Investigation of PCBM", ZnO and C60, J. Alloys Compd, pp.2022, 921[DOI]
- Valerio L, "Characterization and Analysis of FAxCs(1-x)Pb(IyBr(1-y))3 Perovskite Solar Cells with Thickness Controlled Transport Layers for Performance Optimization", AIP Advances, 9, pp.105006~ (2019)
- Kim JY, "High-Efficiency Perovskite Solar Cells", Chem. Rev, 120, pp.7867~7918 (2020)
- Juan B, "From Frequency Domain to Time Transient Methods for Halide Perovskite Solar Cells : The Connections of IMPS, IMVS, TPC, and TPV", J. Phys. Chem. Lett, 12, pp.7964~7971 (2021)
- Hidayat R, "Revealing the Charge Carrier Kinetics in Perovskite Solar Cells Affected by Mesoscopic Structures and Defect States from Simple Transient Photovoltage Measurements", Sci. Rep, 10, pp.19197~ (2020)
- Sheila D, "A Comparative Study of the Radiation Resistance of Four Optically Transparent Polyimides", Radiat. Phys. Chem, 62, pp.189~194 (2001)