Maxillary implant-supported overdenture with mesostructure abutment: A case report
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Prosthesis that require and are connected to multiple internal implant fixtures, are often difficult to fabricate. Furthermore, if the angle is not appropriate, the implant may not be retrievable. In the current case, a bar implant overdenture was planned for a full-mouth restoration of a maxillary edentulous patient. However, the prosthesis was difficult to fabricate because of the improper buccolingual angulation of the implanted internal implant fixtures. Therefore, the internal implant fixture was replaced with an external implant prosthetic system, by connecting a ‘convertible abutment’, which is a type of mesostructure abutment. Following this, a bar attachment was made to fabricate the implant overdenture. In this paper, we report the results of this study by supplementing the limitation of the previous implant prosthesis system, and consequently obtaining functionally satisfactory results.
Abstract
Prosthesis that require and are connected to multiple internal implant fixtures, are often difficult to fabricate. Furthermore, if the angle is not appropriate, the implant may not be retrievable. In the current case, a bar implant overdenture was planned for a full-mouth restoration of a maxillary edentulous patient. However, the prosthesis was difficult to fabricate because of the improper buccolingual angulation of the implanted internal implant fixtures. Therefore, the internal implant fixture was replaced with an external implant prosthetic system, by connecting a ‘convertible abutment’, which is a type of mesostructure abutment. Following this, a bar attachment was made to fabricate the implant overdenture. In this paper, we report the results of this study by supplementing the limitation of the previous implant prosthesis system, and consequently obtaining functionally satisfactory results.
참고문헌 (8)
- 윤형인, "Splinted or Non-splinted: 다수의 인접한 치아결손부 수복을 위한 임플란트 보철", 대한치과의사협회지, 54(3), pp.198~205 (2016), 대한치과의사협회
- 하승룡, "External vs internal implant : 각각의 장점과 고려사항", 대한치과의사협회지, 54(3), pp.184~190 (2016), 대한치과의사협회
- Steven J. Sadowsky, "Treatment considerations for maxillary implant overdentures: A systematic review", The Journal of Prosthetic Dentistry, 97(6), pp.340~348 (2007), Elsevier BV[DOI]
- Lekholm ULF, "Survival of the Brånemark implant in partially edentulous jaws: a 10-year prospective multicenter study", Int J Oral Maxillofac Implants, 14, pp.639~645 (1999)
- Romeo E, "Long-term survival and success of oral implants in the treatment of full and partial arches: a 7-year prospective study with the ITI dental implant system", Int J Oral Maxillofac Implants, 19, pp.247~259 (2004)
- Heeje Lee, "Oral rehabilitation of a completely edentulous epidermolysis bullosa patient with an implant-supported prosthesis: A clinical report", The Journal of Prosthetic Dentistry, 97(2), pp.65~69 (2007), Elsevier BV[DOI]
- Luigi CANULLO, "Mechanical testing of thin-walled zirconia abutments", Journal of Applied Oral Science, 21(1), pp.20~24 (2013), FapUNIFESP (SciELO)[DOI]
- Peter Gehrke, "Retentive Strength of Two-Piece CAD", CAM Zirconia Implant Abutments, 2014, pp.16(6), 920~925[DOI]