Micro-computed tomography 영상을 이용한 치아의 컴퓨터 3차원 모델 생성 및 유한요소 분석에의 응용

키워드

참고문헌 (34)

1. Mikrogeorgis G, "3D computer-aided reconstruction of six teeth with morphological abnormalities", Int Endod J, 32, pp.88~93 (1999)
2. Kamegawa M, "3D morphological assessment of occlusal treatment by measuring dental casts with a microfocus X-ray CT", J Oral Rehabil, 35, pp.382~389 (2008)
3. Jones ML, "A validated finite element method study of orthodontic tooth movement in the human subject", J Orthod, 28, pp.29~38 (2001)
4. Knox J, "An evaluation of the stresses generated in a bonded orthodontic attachment by three different load cases using the finite element method of stress analysis", J Orthod, 27, pp.39~46 (2000)
5. Soares PV, "Influence of restorative technique on the biomechanical behavior of endodontically treated maxillary premolars. Part II: strain measurement and stress distribution", J Prosthet Dent, 99, pp.114~122 (2008)
6. Koca OL, "Three-dimensional finite-element analysis of functional stresses in different bone locations produced by implants placed in the maxillary posterior region of the sinus floor", J Prosthet Dent, 93, pp.38~44 (2005)
7. Magne P, "Incisor compliance following operative procedures: a rapid 3-D finite element analysis using micro-CT data", J Adhes Dent, 10, pp.49~56 (2008)
8. Magne P, "Efficient 3D finite element analysis of dental restorative procedures using micro-CT data", Dent Mater, 23, pp.539~548 (2007)
9. Ausiello P, "Effect of adhesive layer properties on stress distribution in composite restorations--a 3D finite element analysis", Dent Mater, 18, pp.295~303 (2002)
10. Zarone F, "Influence of tooth preparation design on the stress distribution in maxillary central incisors restored by means of alumina porcelain veneers: a 3D-finite element analysis", Dent Mater, 21, pp.1178~1188 (2005)
11. Ausiello P, "3D-finite element analyses of cusp movements in a human upper premolar, restored with adhesive resin-based composites", J Biomech, 34, pp.1269~1277 (2001)
12. Mavili ME, "Use of three-dimensional medical modeling methods for precise planning of orthognathic surgery", J Craniofac Surg, 18, pp.740~747 (2007)
13. Metzger MC, "Manufacturing splints for orthognathic surgery using a three-dimensional printer", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 105, pp.e1~e7 (2008)
14. Cucchiara R, "An image analysis approach for automatically re-orienteering CT images for dental implants", Comput Med Imaging Graph, 28, pp.185~201 (2004)
15. Lee SP, "Predicting first molar width using virtual models of dental arches", Clin Anat, 21, pp.27~32 (2008)
16. Chen Y, "Three-dimensional spiral computed tomographic imaging: a new approach to the diagnosis and treatment planning of impacted teeth", Am J Orthod Dentofacial Orthop, 130, pp.112~116 (2006)
17. Takada H, "Three-dimensional bone microstructures of the mandibular angle using micro-CT and finite element analysis: relationship between partially impacted mandibular third molars and angle fractures", Dent Traumatol, 22, pp.18~24 (2006)
18. Li W, "Towards automated 3D finite element modeling of direct fiber reinforced composite dental bridge", J Biomed Mater Res B Appl Biomater, 74, pp.520~528 (2005)
19. Chang KH, "An advanced approach for computer modeling and prototyping of the human tooth", Ann Biomed Eng, 31, pp.621~631 (2003)
20. Buchaillard SI, "3D statistical models for tooth surface reconstruction", Comput Biol Med, 37, pp.1461~1471 (2007)
21. Kato A, "Construction of three-dimensional tooth model by micro-computed tomography and application for data sharing", Clin Oral Investig, 13, pp.43~46 (2009)
22. Zhang L, "A dental vision system for accurate 3D tooth modeling", Conf Proc IEEE Eng Med Biol Soc, 1, pp.4799~4802 (2006)
23. Xiaojun C, "Computer-aided oral implantology: methods and applications", J Med Eng Technol, 31, pp.459~467 (2007)
24. Gaoa J, "3D shape reconstruction of teeth by shadow speckle correlation method", Optic Laser Eng, 44, pp.455~465 (2006)
25. Chen M, "Comparison study on the 3D reconstruction of mandible according to virtual Chinese human slice data and CT data", World J Model Simul, 3, pp.235~240 (2007)
26. Rudolph H, "Computer-aided analysis of the influence of digitizing and surfacing on the accuracy in dental CAD", CAM technology, 2007, pp.37, 579~587
27. Shi L, "Shape optimization of dental implants", Int J Oral Maxillofac Implants, 22, pp.911~920 (2007)
28. Gao J, "3D finite element mesh generation of complicated tooth model based on CT slices", Comput Methods Programs Biomed, 82, pp.97~105 (2006)
29. Boyd SK, "Smooth surface meshing for automated finite element model generation from 3D image data", J Biomech, 39, pp.1287~1295 (2006)
30. Paulus D, "Three-dimensional computer vision for tooth restoration", Med Image Anal, 3, pp.1~19 (1999)
31. Dalstra M, "Development and validation of a three-dimensional finite element model of the pelvic bone", J Biomech Eng, 117, pp.272~278 (1995)
32. Peters MCRB, "Biomechanical stress analysis of the amalgam-tooth interface", J Dent Res, 62, pp.358~362 (1983)
33. Pao YC, "Root stresses with tapered-end post design in periodontally compromised teeth", J Prosthet Dent, 57, pp.281~286 (1987)
34. Apicella A, "A finite-element model study of occlusal schemes in full-arch implant restoration", J Mater Sci Mater Med, 9, pp.191~196 (1998)

관련 논문AI추천