수종의 치과용 접착제의 용매 증발에 관한 연구
A study on the evaporation of various dental adhesive
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Purpose: The purpose of this study was to evaluate the characteristics of the evaporation of various kinds of dental adhesives by the measurement of evaporation rates and rates of volatile parts of adhesives. Materials and Methods: OptiBond FL (Kerr, FL), CLEARFIL SE BOND (Kuraray, SE), OptiBond S (Kerr, OS), and OptiBond All-In-One (Kerr, OA) were used in this study. Adhesive was dispensed on slide glass and weighted by precision balance. Adhesive was dried for 10 sec and 30 sec and then weighted. Until the weight of the adhesive became constant, adhesive was stored in dark oven and then weighted. The results were statistically analyzed using One way ANOVA and Scheffe test. Results: The longer drying time had better results and the evaporation rate of OA and the rate of volatile part of FL were significantly higher than other groups (p<0.05). Conclusion: Therefore, evaporation characteristics of the solvent should be considered when using the dental adhesive.
Abstract
Purpose: The purpose of this study was to evaluate the characteristics of the evaporation of various kinds of dental adhesives by the measurement of evaporation rates and rates of volatile parts of adhesives. Materials and Methods: OptiBond FL (Kerr, FL), CLEARFIL SE BOND (Kuraray, SE), OptiBond S (Kerr, OS), and OptiBond All-In-One (Kerr, OA) were used in this study. Adhesive was dispensed on slide glass and weighted by precision balance. Adhesive was dried for 10 sec and 30 sec and then weighted. Until the weight of the adhesive became constant, adhesive was stored in dark oven and then weighted. The results were statistically analyzed using One way ANOVA and Scheffe test. Results: The longer drying time had better results and the evaporation rate of OA and the rate of volatile part of FL were significantly higher than other groups (p<0.05). Conclusion: Therefore, evaporation characteristics of the solvent should be considered when using the dental adhesive.
참고문헌 (24)
- Asmussen E, "Influence of the solubility parameter of intermediary resin on the effectiveness of the gluma bonding system", J Dent Res, 70, pp.1290~1293 (1991)
- Tay FR, "Have dentin adhesives become too hydrophilic?", J Can Dent Assoc, 69, pp.726~731 (2003)
- Nakajima M, "Dimensional changes and ultimate tensile strengths of wet decalcified dentin applied with one-bottle adhesives", Dent Mater, 18, pp.603~608 (2002)
- Hiraishi N, "Water concentration in self-etching primers affects their aggressiveness and bonding efficacy to dentin", J Dent Res, 84, pp.653~658 (2005)
- Cadenaro M, "Degree of conversion of resin blends in relation to ethanol content and hydrophilicity", Dent Mater, 24, pp.1194~1200 (2008)
- Wang Y, "Effect of solvent content on resin hybridization in wet dentin bonding", J Biomed Mater Res A, 82, pp.975~983 (2007)
- Spreaco D, "The effect of the air-blowing step on the technique sensitivity of four different adhesive systems", J Dent, 34, pp.237~244 (2006)
- Hotta M, "Effect of primers on bonding agent polymerization", J Oral Rehabil, 25, pp.792~799 (1998)
- Hashimoto M, "Fluid movement across the resin-dentin interface during and a«er bonding", J Dent Res, 83, pp.843~848 (2004)
- Malacarne-Zanon J, "Effects of ethanol addition on the water sorption", solubility and percent conversion of comonomers in model dental adhesives, 2009, pp.25, 1275~1284
- Jacobsen T, "Some effects of water on dentin bonding", Dent Mater, 11, pp.132~136 (1995)
- Ikeda T, "Effect of evaporation of primer components on ultimate tensile strengths of primer-adhesive mixture", Dent Mater, 21, pp.1051~1058 (2005)
- Hashimoto M, "The effects of common errors on sealing ability of total-etch adhesives", Dent Mater, 22, pp.560~568 (2006)
- Sadr A, "Effects of solvent drying time on micro-shear bond strength and mechanical properties of two self-etching adhesive systems", Dent Mater, 23, pp.1114~1119 (2007)
- Ikeda T, "Effect of air-drying and solvent evaporation on the strength of HEMA-rich versus HEMA-free one-step adhesives", Dent Mater, 24, pp.1316~1323 (2008)
- Pashley DH, "State of the art etch-and-rinse adhesives", Dent Mater, 27, pp.1~16 (2011)
- Abate PF, "Evaporation of solvent in one-bottle adhesives", J Dent, 28, pp.437~440 (2000)
- Hiraishi N, "Technique sensitivity associated with air-drying of HEMA-free, single-bottle, one-step self-etch adhesives", Dent Mater, 23, pp.498~505 (2007)
- Cadenaro M, "Effects of residual ethanol on the rate and degree of conversion of five experimental resins", Dent Mater, 25, pp.621~628 (2009)
- Pashley EL, "Effects of HEMA on water evaporation from water-HEMA mixtures", Dent Mater, 14, pp.6~10 (1998)
- Van Landuyt KL, "Systematic review of the chemical composition of contemporary dental adhesives", Biomaterials, 28, pp.3757~3785 (2007)
- Zheng L, "Relation-ship between adhesive thickness and microtensile bond strength", Oper Dent, 26, pp.97~104 (2001)
- Klein-Júnior CA, "Evaporating solvents with a warm air-stream: effects on adhesive layer properties and resin-dentin bond strengths", J Dent, 36, pp.618~625 (2008)
- Marsiglio AA, "Influences of warm-air drying on dentin bond strength", Dent Mater, 26, pp.e140~e141 (2010)