CAD/CAM 세라믹의 두께가 색조에 미치는 영향
Effect of CAD/CAM ceramic thickness on shade
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Objectives: The purpose of the study was to investigate the effect of CAD/CAM ceramic thickness on shade. Methods: 24 disk-shaped ceramic specimens (E.Max CAD & Empress CAD, 12 mm × 12 mm) were prepared and divided into 4 groups (n=6). Ceramic specimens in 2 thicknesses (0.8 mm, 1.0 mm) were made low translucency(LT) shade A2. All specimens were measured as L*, a*, b* using spectrophotometer. The color differences(∆E values) between the specimen and a control target block (12 × 12 × 1.2 mm) were calculated. Two-way ANOVA performed between 2 groups(material and thickness). Results: As the thickness increased, the L* (for all groups) and b* value (for all groups) increased and the a* value(for LR group) decreased. The mean color differences caused by thickness was acceptible (ΔE > 2) for group LD1. But the mean color differences by thickness were not selected (ΔE < 2) for group LD2, LR1, LR2. Conclusions: The different thickness can influence the final color of CAD/CAM ceramic.
Abstract
Objectives: The purpose of the study was to investigate the effect of CAD/CAM ceramic thickness on shade. Methods: 24 disk-shaped ceramic specimens (E.Max CAD & Empress CAD, 12 mm × 12 mm) were prepared and divided into 4 groups (n=6). Ceramic specimens in 2 thicknesses (0.8 mm, 1.0 mm) were made low translucency(LT) shade A2. All specimens were measured as L*, a*, b* using spectrophotometer. The color differences(∆E values) between the specimen and a control target block (12 × 12 × 1.2 mm) were calculated. Two-way ANOVA performed between 2 groups(material and thickness). Results: As the thickness increased, the L* (for all groups) and b* value (for all groups) increased and the a* value(for LR group) decreased. The mean color differences caused by thickness was acceptible (ΔE > 2) for group LD1. But the mean color differences by thickness were not selected (ΔE < 2) for group LD2, LR1, LR2. Conclusions: The different thickness can influence the final color of CAD/CAM ceramic.
참고문헌 (37)
- Kelly JR, "Ceramics in dentistry: historical roots and current perspectives", J Prosthet Dent, 75, pp.18~32 (1996)[DOI]
- Rosenstiel SF, "Contemporary fixed prosthodontics", pp.774~ (2006), Mosby
- Christensen GJ, "Porcelain-fused-to-metal vs. nonmetal crowns", J Am Dent Assoc, 130, pp.409~411 (1999)[DOI]
- Denry IL., "Recent advances in ceramics for dentistry", Crit Rev Oral Biol Med, 7, pp.134~143 (1996)[DOI]
- Miyazaki T, "A review of dental CAD", CAM: current status and future perspectives from 20 years of experience, 2009, pp.28(1), 44~56
- Aboushelib MN, "Microtensile bond strength of different components of core veneered all-ceramic restorations", Dent Mater, 21, pp.984~991 (2005)[DOI]
- Culp L, "Lithium Disilicate: The Restorative Material of Multiple Options", Compend Contin Educ Dent, 31, pp.716~725 (2010)
- Heffernan MJ, "Relative translucency of six all-ceramic systems. Part I: core materials", The Journal of prosthetic dentistry, 88(1), pp.49~9 (2002)[DOI]
- Teixeira EC, "Dynamic fatigue and strength characterization of three ceramic materials", Journal of Materials Science: Materials in Medicine, 18(6), pp.1219~1224 (2007)[DOI]
- Höland W, "Clinical applications of glass-ceramics in dentistry", Journal of Materials Science: Materials in Medicine, 17(11), pp.1037~1042 (2006)[DOI]
- McLaren EA, "Ceramics in dentistry—part I: classes of materials", Inside Dent, 5, pp.94~104 (2009)
- Guarda GB, "Effects of surface treatments, thermocycling, and cyclic loading on the bond strength of a resin cement bonded to a lithium disilicate glass ceramic", Oper Dent, 38(2), pp.208~217 (2013)[DOI]
- Sproull RC, "Color matching in dentistry. Part Ⅰ. The three-dimensional nature of color", J Prosthet Dent, 29, pp.416~424 (2001)[DOI]
- Swepston JH, "Esthetic matching", J Prosthet Dent, 54, pp.623~625 (1985)[DOI]
- O’Brien WJ, "A new, small-colordifference equation for dental shades", J Dent Res, 69, pp.1762~1764 (1990)[DOI]
- Barath VS, "Spectrophotometric Analysis of All-ceramic Materials and Their Interaction with Luting Agents and Different Backgrounds", Adv Dent Res, 17(1), pp.55~60 (2003)[DOI]
- Gomez Polo C, "Differences between the human eye and the spectrophotometer in the shade matching of tooth colour", J Dent, 42(6), pp.742~745 (2014)[DOI]
- Celik G, "The effect of repeated firing on the color of an all-ceramic system with two different veneering porcelain shades", J Prosthet Dent, 99, pp.203~208 (2008)[DOI]
- Walter WS, "Correction of single-beam sample absorption error in a hemispherical 45°", 0° spectrophotomter meaxurement cavity, 2013, pp.39(5), 436~441
- Vichi A, "Influence of ceramic and cement thickness on the masking of various types of opaque posts", J Prosthet Dent, 83, pp.412~417 (2000)[DOI]
- Hannad IA, "A qualitative study for the bond and color of ceramometals. Part Ⅱ", J Prosthet Dent, 65, pp.169~179 (1991)[DOI]
- Tuncdemir AR, "The effects of porcelain polishing techniques on the color and surface texture of different porcelain systems", Mater Sci Appl, 3, pp.294~300 (2012)[DOI]
- Yu B, "Color difference of all-ceramic materials by the change of illuminants", Am J Dent, 22, pp.73~78 (2009)
- Alma Dozic, "The influence of porcelain layer thickness on the final shade of ceramic restorations", J Prosthet Dent, 90, pp.563~570 (2003)[DOI]
- Jorgenson MW, "Spectrophotometric study of five porcelain shades relative to the dimensions of color, porcelain thickness, and repeated firings", J Prosthet Dent, 42, pp.96~105 (1979)[DOI]
- Barghi N, "A study of various factors influencing the shade of bonded porcelain", J Prosthet Dent, 39, pp.282~284 (1978)[DOI]
- Barghi N, "Color and galze : effects of repeated firings", J Prosthet Dent, 47, pp.393~395 (1982)[DOI]
- Zijp JR, "HeNe-laser scattering by human dental enamel", J Dent Res, 74, pp.1891~1898 (1995)[DOI]
- Ten Bosch JJ, "Tooth color and reflectance as related to light scattering and enamel hardness", J Dent Res, 74, pp.374~380 (1995)[DOI]
- Corciolani G, "Influence of layering thickness on the color parameters of a ceramic system", Dent Mater, 26(8), pp.737~742 (2010)[DOI]
- Son HJ, "Influence of dentin porcelain thickness on layered all-ceramic restoration color", J Dent, 38(2), pp.e71~e77 (2010)[DOI]
- Nakamura T, "Influence of abutment substrate and ceramic thickness on the colour of heat-pressed ceramic crown", J Oral Rehabil, 29, pp.805~809 (2002)[DOI]
- Della Bona A, "Colour parameters and shade correspondence of CAD-CAM ceramic systems", J Dent, 43, pp.726~734 (2015)[DOI]
- 성동환, "도채층의 두께와 색이 도재수복물의 최종 색조에 미치는 영향", 대한치과보철학회지, 43(5), pp.587~598 (2005), 대한치과보철학회
- Salameh Z, "Influence of ceramic color and translucency on shade match of CAD", CAM porcelain veneers, 2014, pp.9(1), 90~98
- Seghi RR, "Visual and instrumental colorimetric assessments of small color differences on translucent dental porcelain", J Dent Res, 68, pp.1760~1764 (1989)[DOI]
- Douglas RD, "Intraoral determination of the tolerance of dentists for perceptibility and acceptability of shade mismatch", J Prosthet Dent, 97(4), pp.200~208 (2007)[DOI]